CEN/TS 16137:2011
|
Plastics - Determination of bio-based carbon content |
ISO 3171:1988
|
Petroleum liquids — Automatic pipeline sampling |
EN 15440 : 2011 COR 2011
|
SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF BIOMASS CONTENT |
ISO 10715:1997
|
Natural gas — Sampling guidelines |
ISO 5555:2001
|
Animal and vegetable fats and oils — Sampling |
PREN 16785-2 : DRAFT 2015
|
BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 2: DETERMINATION OF THE BIO-BASED CONTENT USING THE MATERIAL BALANCE METHOD |
ISO 8943:2007
|
Refrigerated light hydrocarbon fluids Sampling of liquefied natural gas Continuous and intermittent methods |
ISO 3170:2004
|
Petroleum liquids — Manual sampling |
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
EN ISO 4257:2001
|
Liquefied petroleum gases - Method of sampling (ISO 4257:2001) |
EN ISO 21068-2:2008
|
Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon (ISO 21068-2:2008) |
ISO 1928:2009
|
Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value |
ISO 10210:2012
|
Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials |
ASTM C 224 : 1978
|
PRACTICE FOR SAMPLING GLASS CONTAINERS |
ISO 13833:2013
|
Stationary source emissions Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide Radiocarbon sampling and determination |
EN ISO 15528:2013
|
Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013) |
DIN 51637:2014-02
|
LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE BIO-BASED HYDROCARBON CONTENT IN DIESEL FUELS AND MIDDLE DISTILLATES USING LIQUID SCINTILLATION METHOD |
EN 15442:2011
|
Solid recovered fuels - Methods for sampling |
EN 14778:2011
|
Solid biofuels - Sampling |
EN 14780:2011
|
Solid biofuels - Sample preparation |
EN 16785-1:2015
|
Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
EN 15443:2011
|
Solid recovered fuels - Methods for the preparation of the laboratory sample |
EN ISO 13833:2013
|
Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013) |
ASTM C 322 : 2009
|
Standard Practice for Sampling Ceramic Whiteware Clays |
EN 15400:2011
|
Solid recovered fuels - Determination of calorific value |
ISO 1795:2017
|
Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
ISO 15528:2013
|
Paints, varnishes and raw materials for paints and varnishes Sampling |
ISO 4257:2001
|
Liquefied petroleum gases Method of sampling |
ISO 21068-2:2008
|
Chemical analysis of silicon-carbide-containing raw materials and refractory products Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon |
ASTM D 6085 : 1997
|
Standard Practice for Sampling in Rubber Testing--Terminology and Basic Concepts |
ISO 186:2002
|
Paper and board — Sampling to determine average quality |
ASTM C 172/C172M : 2017 : REDLINE
|
Standard Practice for Sampling Freshly Mixed Concrete |
ASTM D 3437 : 2015 : REDLINE
|
Standard Practice for Sampling and Handling Liquid Cyclic Products |
EN 27213 : 1993
|
PULPS - SAMPLING FOR TESTING |
ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ASTM D 7026 : 2013
|
Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis (Withdrawn 2020) |
EN ISO 186 : 2002
|
Paper and board - Sampling to determine average quality (ISO 186:2002) |
EN 16575:2014
|
Bio-based products - Vocabulary |
ISO 20904:2006
|
Hard coal Sampling of slurries |
EN ISO 10715:2000
|
Natural gas - Sampling guidelines (ISO 10715:1997) |
ASTM D 5291 : 2016 : REDLINE
|
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
ISO 18283:2006
|
Hard coal and coke Manual sampling |
EN ISO 1716:2010
|
Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
EN ISO 3170:2004
|
Petroleum liquids - Manual sampling (ISO 3170:2004) |
ASTM D 7718 : 2011
|
Standard Practice for Obtaining In-Service Samples of Lubricating Grease |
ASTM D 2915 : 2017 : REDLINE
|
Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ISO 7213:1981
|
Pulps Sampling for testing |
EN ISO 3171:1999
|
Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |