EN 12982:2009
|
Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
EN ISO 9692-1:2013
|
Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013) |
EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
ISO 7005-2:1988
|
Metallic flanges — Part 2: Cast iron flanges |
EN 16722:2015
|
Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
PREN 558 : DRAFT 2015
|
INDUSTRIAL VALVES - FACE-TO-FACE AND CENTRE-TO-FACE DIMENSIONS OF METAL VALVES FOR USE IN FLANGED PIPE SYSTEMS - PN AND CLASS DESIGNATED VALVES |
EN ISO 1043-1:2011/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
EN 1759-1:2004
|
Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
ISO 14732:2013
|
Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
EN 12266-2:2012
|
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
ISO 9606-1:2012
|
Qualification testing of welders — Fusion welding — Part 1: Steels |
EN 12516-1:2014
|
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
EN 12516-4:2014
|
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
EN ISO 14732:2013
|
Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
EN 736-2:2016
|
Valves - Terminology - Part 2: Definition of components of valves |
ISO 148-1:2016
|
Metallic materials — Charpy pendulum impact test — Part 1: Test method |
EN ISO 228-1:2003
|
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
EN 12266-1:2012
|
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
ISO 9692-1:2013
|
Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels |
ASME B1.20.1 : 2013(R2018)
|
PIPE THREADS, GENERAL PURPOSE (INCH) |
ISO 7-1:1994
|
Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
DIN ISO 1629:2015-03
|
RUBBER AND LATICES - NOMENCLATURE (ISO 1629:2013) |
EN 12351:2010
|
Industrial valves - Protective caps for valves with flanged connections |
EN 12516-3:2002/AC:2003
|
VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD |
ISO 4200:1991
|
Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
ASME B36.10M : 2015
|
WELDED AND SEAMLESS WROUGHT STEEL PIPE |
EN 1515-4:2009
|
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
PREN 12760 : DRAFT 2015
|
INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
EN ISO 148-1:2016
|
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
EN 12516-2:2014
|
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials General rules |
DIN EN 10220:2003-03
|
SEAMLESS AND WELDED STEEL TUBES - DIMENSIONS AND MASSES PER UNIT LENGTH |
EN ISO 9606-1:2017
|
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
EN 1092-2:1997
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
EN 19:2016
|
Industrial valves - Marking of metallic valves |
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
ISO 1629:2013
|
Rubber and latices — Nomenclature |
EN 736-3:2008
|
Valves - Terminology - Part 3: Definition of terms |
ASME B16.25 : 2012
|
BUTTWELDING ENDS |
EN ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |