DIN EN 287-6:2016-03 (Draft)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
Hardcopy , PDF
07-03-2021
German
01-01-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Symbole und Abkürzungen
4.1 Allgemeines
4.2 Ordnungsnummern von Schweissprozessen
4.3 Abkürzungen
5 Wesentliche Einflussgrössen
5.1 Allgemeines
5.2 Schweissprozesse
5.3 Nahtarten (Stumpf- und Kehlnähte) und
Nahtvorbereitung
5.4 Werkstoffgruppen
5.5 Schweissgut
5.6 Schweisspositionen
6 Geltungsbereich
6.1 Allgemeines
6.2 Schweissprozess
6.3 Schweissposition
6.4 Gusseisen-Werkstoffgruppen
6.5 Prüfstück
6.6 Vorgehensweise
7 Durchführung der Prüfung und Untersuchung
7.1 Aufsicht
7.2 Formen und Masse der Prüfstücke
7.3 Schweissbedingungen
7.4 Prüfumfang
7.5 Prüfstücke und Proben
8 Abnahmeanforderungen an die Prüfstücke
9 Ersatzprüfung
10 Gültigkeitsdauer
10.1 Erstmalige Prüfung
10.2 Bestätigung der Gültigkeit
10.3 Verlängerung der Qualifikation
11 Schweisser-Prüfungsbescheinigung
12 Bezeichnung
Anhang A (informativ) Werkstoffgruppen bei Gusseisen
Anhang B (informativ) Schweisser-Prüfungsbescheinigung
Anhang C (informativ) Fachkunde
C.1 Allgemeines
C.2 Anforderungen
Literaturhinweise
This standard is included in DIN HDBK 454 & 454/3.
| DevelopmentNote |
DRAFT 2016 issued in March 2016. (03/2016)
|
| DocumentType |
Draft
|
| Pages |
54
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| EN 287-6:2018 | Identical |
| DIN HDBK 454 : 1999 | GUENSTIG IM PAKET: GIESSEREIWESEN TEILE 1, 2 UND 3 - STAHLGUSS UND GUSSEISEN |
| DIN HDBK 454/3 : 1ED 2014 | GIESSEREIWESEN 3 - STAHLGUSS UND GUSSEISEN - WERKSTOFFE, SCHWEISSEN, ZUBEHOER |
| EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
| ISO 14341:2010 | Welding consumables Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification |
| ISO 2553:2013 | Welding and allied processes Symbolic representation on drawings Welded joints |
| ISO 6520-1:2007 | Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
| ISO 15614-3:2008 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 3: Fusion welding of non-alloyed and low-alloyed cast irons |
| EN 1321:1996 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
| ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
| ISO 2560:2009 | Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification |
| EN ISO 6947:2011 | Welding and allied processes - Welding positions (ISO 6947:2011) |
| EN 1562:2012 | Founding - Malleable cast irons |
| EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| EN 13835:2012 | Founding - Austenitic cast irons |
| EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| EN ISO 14341:2011 | Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010) |
| EN 22553:1994 | Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
| EN ISO 2560:2009 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
| ISO 857-1:1998 | Welding and allied processes Vocabulary Part 1: Metal welding processes |
| ISO 17632:2015 | Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification |
| EN 12062:1997/A2:2003 | NON-DESTRUCTIVE EXAMINATION OF WELDS - GENERAL RULES FOR METALLIC MATERIALS |
| CEN ISO/TR 15608:2017 | Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017) |
| EN ISO 17632:2015 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015) |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| EN ISO 1071:2015 | Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015) |
| ISO 14175:2008 | Welding consumables — Gases and gas mixtures for fusion welding and allied processes |
| ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
| ISO 1071:2015 | Welding consumables Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron Classification |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| DIN EN 14610:2005-02 | WELDING AND ALLIED PROCESSES - DEFINITIONS OF METAL WELDING PROCESSES |
| EN 970:1997 | Non-destructive examination of fusion welds - Visual examination |
| EN 1290:1998/A2:2003 | NON-DESTRUCTIVE EXAMINATION OF WELDS - MAGNETIC PARTICLE EXAMINATION OF WELDS |
| EN ISO 15614-3:2008 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3: Fusion welding of non-alloyed and low-alloyed cast irons (ISO 15614-3:2008) |
| ISO 6947:2011 | Welding and allied processes Welding positions |
| EN 1561:2011 | Founding - Grey cast irons |
| EN 1320:1996 | Destructive tests on welds in metallic materials - Fracture test |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN ISO 14175:2008 | Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.