DIN EN 469:2015-08 (Draft)
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING
Available format(s)
Hardcopy , PDF
Superseded date
19-12-2020
Superseded by
Language(s)
German
Published date
01-01-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General clothing design
5 Sampling and pre-treatment
6 Physical requirements
7 Marking
8 Information supplied by the manufacturer
Annex A (normative) - Uncertainty of
measurement
Annex B (normative) - Determination of
performance and rating classification
Annex C (normative) - Significant technical changes
between this document and the previous
edition EN 469:2005
Annex ZA (informative) - Relationship between
this European Standard and the Essential
Requirements of EU Directive 89/686/EEC
Bibliography
This standard is included in DIN Handbook 485.
| DevelopmentNote |
DRAFT AMD 1 issued in April 2015 is now cancelled. (10/2015) 2014 Edition issued in September 2014 has been declared withdrawn by publisher on 01/04/2016. DRAFT 2015 issued in August 2015 is now cancelled. (02/2017)
|
| DocumentType |
Draft
|
| Pages |
53
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NEN EN 469 : 2006 AMD 1 2006 | Identical |
| BS EN 469:2014 | Identical |
| NS EN 469 : 2005 AMD 1 2006 | Identical |
| UNE-EN 469:2006 | Identical |
| SN EN 469 : 2006 | Identical |
| NF EN 469 : 2014 | Identical |
| NBN EN 469 : 2014 | Identical |
| UNI EN 469 : 2014 | Identical |
| I.S. EN 469:2014 | Identical |
| ONORM EN 469 : 2007 | Identical |
| BWB TL 8415-0315 : 1ED 2007 | |
| DGUV INFORMATION 205-014 : 2016 | AUSWAHL VON PERSOENLICHER SCHUTZAUSRUESTUNG FUER EINSAETZE BEI DER FEUERWEHR - BASIEREND AUF EINER GEFAEHRDUNGSBEURTEILUNG |
| EN 15614:2007 | Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland clothing |
| EN 943-1:2015 | Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| EN 943-2:2002 | Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET) |
| EN ISO 1421:2016 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
| EN 13921:2007 | Personal protective equipment - Ergonomic principles |
| ISO 12894:2001 | Ergonomics of the thermal environment Medical supervision of individuals exposed to extreme hot or cold environments |
| ISO 3175-2:2010 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene |
| EN ISO 13937-2:2000 | Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) (ISO 13937-2:2000) |
| ISO 6530:2005 | Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids |
| EN 20811:1992 | Textiles - Determination of resistance to water penetration - Hydrostatic pressure test |
| EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| CEN/TR 14560:2003 | Guidance for selection, use, care and maintenance of protective clothing against heat and flame |
| DIN ISO 13506:2008-12 | PROTECTIVE CLOTHING AGAINST HEAT AND FLAME - TEST METHOD FOR COMPLETE GARMENTS - PREDICTION OF BURN INJURY USING AN INSTRUMENTED MANIKIN |
| ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
| ISO 13688:2013 | Protective clothing — General requirements |
| EN 1149-1:2006 | Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity |
| EN 61482-1-2:2014 | Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test) |
| ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| IEC 61482-1-2:2014 | Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test) |
| EN ISO 4920:2012 | Textile fabrics - Determination of resistance to surface wetting (spray test) (ISO 4920:2012) |
| EN ISO 13998:2003 | Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
| EN ISO 11612:2015 | Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO 11612:2015) |
| EN ISO 11611:2015 | Protective clothing for use in welding and allied processes (ISO 11611:2015) |
| ISO 15538:2001 | Protective clothing for firefighters — Laboratory test methods and performance requirements for protective clothing with a reflective outer surface |
| EN ISO 5077:2008 | Textiles - Determination of dimensional change in washing and drying (ISO 5077:2007) |
| ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
| ISO 13998:2003 | Protective clothing Aprons, trousers and vests protecting against cuts and stabs by hand knives |
| ISO 15384:2003 | Protective clothing for firefighters Laboratory test methods and performance requirements for wildland firefighting clothing |
| EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
| EN ISO 13935-2:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014) |
| ISO 17493:2016 | Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven |
| ISO 11611:2015 | Protective clothing for use in welding and allied processes |
| EN ISO 6530:2005 | Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005) |
| ISO 14460:1999 | Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods |
| ISO 20471:2013 | High visibility clothing — Test methods and requirements |
| ISO 7933:2004 | Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain |
| ISO 11092:2014 | Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
| EN 13911:2017 | Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters |
| EN ISO 7933:2004 | Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004) |
| EN ISO 15025:2016 | Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) |
| EN ISO 13688:2013 | Protective clothing - General requirements (ISO 13688:2013) |
| EN 137:2006 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| ISO 15797:2002 | Textiles Industrial washing and finishing procedures for testing of workwear |
| ISO 4920:2012 | Textile fabrics — Determination of resistance to surface wetting (spray test) |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| EN ISO 12894:2001 | Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments (ISO 12894:2001) |
| EN 1486:2007 | Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
| ISO 9886:2004 | Ergonomics Evaluation of thermal strain by physiological measurements |
| EN ISO 6330:2012 | Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012) |
| EN ISO 6942:2002 | Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
| EN ISO 9886:2004 | Ergonomics - Evaluation of thermal strain by physiological measurements (ISO 9886:2004) |
| ISO 13506:2008 | Protective clothing against heat and flame Test method for complete garments Prediction of burn injury using an instrumented manikin |
| EN 1149-3:2004 | Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay |
| ISO 11613:1999 | Protective clothing for firefighters Laboratory test methods and performance requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.