DIN EN ISO 10931:2015-11
Current
Current
The latest, up-to-date edition.
PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 10931:2005 + AMD 1:2015)
Available format(s)
Hardcopy , PDF
Language(s)
German, English
Published date
01-11-2015
€148.32
Excluding VAT
This standard is included in DIN Handbook 190.
| Committee |
TC 155
|
| DocumentType |
Standard
|
| Pages |
43
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 10931:2005 | Identical |
| NF EN ISO 10931 : 2006 AMD 1 2015 | Identical |
| NBN EN ISO 10931 : 2006 AMD 1 2015 | Identical |
| NEN EN ISO 10931 : 2005 AMD 1 2015 | Identical |
| NS EN ISO 10931 : 2005 | Identical |
| I.S. EN ISO 10931:2006 | Identical |
| BS EN ISO 10931 : 2005 | Identical |
| UNE-EN ISO 10931:2006 | Identical |
| VDI 2083 Blatt 13.3:2010-10 | Cleanroom technology - Quality, production, and distribution of ultrapure water - Pharmacy and other life-science applications |
| VDI 2083 Blatt 13.2:2009-01 | Cleanroom technology - Quality, production and distribution of ultrapure water - Microelectronics and other technical applications |
| VDI 2083 Blatt 13.1:2009-01 | Cleanroom technology - Quality, production and distribution of ultrapure water - Fundamentals |
| DIN HDBK 190 : 3ED 2006 | ROHRE, ROHRLEITUNGSTEILE UND ROHRVERBINDUNGEN AUS THERMOPLASTISCHEN KUNSTSTOFFEN |
| ISO 15493:2003 | Plastics piping systems for industrial applications — Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) — Specifications for components and the system — Metric series |
| ISO 16135:2006 | Industrial valves — Ball valves of thermoplastics materials |
| ISO/TR 10358:1993 | Plastics pipes and fittings — Combined chemical-resistance classification table |
| ISO 10241:1992 | International terminology standards — Preparation and layout |
| ISO 2507-2:1995 | Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes |
| ISO 15494:2015 | Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system |
| DIN 8078:2008-09 | POLYPROPYLENE (PP) PIPES - PP-H, PP-B, PP-R, PP-RCT - GENERAL QUALITY REQUIREMENTS AND TESTING |
| ISO 265-1:1988 | Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) |
| ISO 2507-1:1995 | Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method |
| DIN 8075:2011-12 | POLYETHYLENE (PE) PIPES - PE 80, PE 100 - GENERAL QUALITY REQUIREMENTS, TESTING |
| DIN ISO 228-1:1994-12 | PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE THREADS - PART 1: DIMENSIONS, TOLERANCES AND DESIGNATION |
| ISO 9080:2012 | Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
| ISO 3:1973 | Preferred numbers — Series of preferred numbers |
| DIN 8061:2016-05 | UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PIPES - GENERAL QUALITY REQUIREMENTS, TESTING |
| DIN 2999-1:1983-07 | PIPE THREADS FOR TUBES AND FITTINGS - PARALLEL INTERNAL THREAD AND TAPER EXTERNAL THREAD - TREAD DIMENSIONS |
| IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
| ISO 11357-3:2011 | Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization |
| ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient |
| ISO 12092:2000 | Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure — Resistance to internal pressure — Test method |
| EN 1778:1999 | Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment |
| ISO 15853:1999 | Thermoplastics materials — Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding |
| ISO 3126:2005 | Plastics piping systems — Plastics components — Determination of dimensions |
| ISO 11922-1:1997 | Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation |
| ISO 472:2013 | Plastics — Vocabulary |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| DIN 53765:1994-03 | TESTING OF PLASTICS AND ELASTOMERS - THERMAL ANALYSIS - DSC-METHOD |
| ISO 2505-1:1994 | Thermoplastics pipes — Longitudinal reversion — Part 1: Determination methods |
| ISO 16138:2006 | Industrial valves — Diaphragm valves of thermoplastics materials |
| ISO 1183-2:2004 | Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method |
| ISO 16137:2006 | Industrial valves — Check valves of thermoplastics materials |
| ISO 9631:2003 | Rubber seals — Joint rings for pipelines for hot-water supply up to 110 degrees C — Specification for the material |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 4065:1996 | Thermoplastics pipes — Universal wall thickness table |
| ISO 16136:2006 | Industrial valves — Butterfly valves of thermoplastics materials |
| ISO/TR 16913:1999 | Plastics pipes and fittings — Definitions of types of test |
| ISO 497:1973 | Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
| ISO 16139:2006 | Industrial valves — Gate valves of thermoplastics materials |
| ISO 21787:2006 | Industrial valves — Globe valves of thermoplastics materials |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation |
| DIN 19531:1987-11 | UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) SOCKET PIPES AND FITTINGS FOR DISCHARGE SYSTEMS INSIDE BUILDINGS - DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.