Skip to content
Please enter a keyword to search

  • DIN EN ISO 12402-7:2015-08 (Draft)

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS

    Available format(s):  Hardcopy, PDF

    Superseded date:  07-03-2021

    Language(s):  German

    Published date:  01-01-2015

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Vorwort
    Einleitung
    1 Anwendungsbereich
    2 Normative Verweisungen
    3 Begriffe
    4 Werkstoffe und Bestandteile
      4.1 Allgemeines
      4.2 Nähgarn
      4.3 Textiles Flächengebilde
      4.4 Gurtband und Zugband
      4.5 Schnürung
      4.6 Reissverschlüsse
      4.7 Beschlagteile
      4.8 Schaumstoff-Auftriebswerkstoff
      4.9 Werkstoffe für aufblasbare Auftriebskammern
      4.10 Beschichtungen aus Polymerschaumstoff
      4.11 Aufblassysteme für vollständig aufblasbare und
           hybride persönliche Auftriebsmittel
      4.12 Gasbehälter
    Anhang A (informativ) Beständigkeit von Werkstoffen gegen
             Schimmelbildung: Erdeingrabversuch
    Anhang B (informativ) Abriebbeständigkeit von Gewebe:
             Schwingprüfverfahren (Verfahren nach Wyzenbeek)
    Anhang C (informativ) Beispiel einer Konstruktionszeichnung
    Literaturhinweise

    Abstract - (Show below) - (Hide below)

    Describes the minimum requirements for construction and performance of materials and components of personal flotation devices as well as relevant test methods.

    General Product Information - (Show below) - (Hide below)

    Comment Closes On
    Development Note Supersedes DIN EN 393, DIN EN 395, DIN EN 396 and DIN EN 399. (03/2007) DRAFT 2017 issued in December 2017. (12/2017)
    Document Type Draft
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Superseded

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN EN ISO 12401:2010-01 Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009)
    DIN EN ISO 12402-1:2005-12 PERSONAL FLOTATION DEVICES - PART 1: LIFEJACKETS FOR SEAGOING SHIPS - SAFETY REQUIREMENTS
    DIN EN ISO 15027-2:2013-03 Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
    DIN EN ISO 15027-1:2013-03 Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
    DIN EN ISO 12402-6:2006-12 Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids - Safety requirements and additional test methods (ISO 12402-6:2006)

    Standards Referencing This Book - (Show below) - (Hide below)

    DIN 50021:1988-06 SPRAY TESTS WITH DIFFERENT SODIUM CHLORIDE SOLUTIONS
    ISO 13934-1:2013 Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
    ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    ISO 12402-5:2006 Personal flotation devices Part 5: Buoyancy aids (level 50) Safety requirements
    DIN EN ISO 4892-2:2013-06 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
    DIN 53508:2000-03 Accelerated ageing of rubber
    ISO 13934-2:2014 Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method
    ISO 9073-4:1997 Textiles Test methods for nonwovens Part 4: Determination of tear resistance
    DIN EN ISO 2411:2016-07 (Draft) RUBBER OR PLASTICS-COATED FABRICS - DETERMINATION OF COATING ADHESION (ISO 2411:2017)
    DIN EN 1095:1998-02 DECK SAFETY HARNESS AND SAFETY LINE FOR USE ON RECREATIONAL CRAFT - SAFETY REQUIREMENTS AND TEST METHODS
    ISO 6330:2012 Textiles Domestic washing and drying procedures for textile testing
    ISO 12402-3:2006 Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirements
    ISO 2411:2017 Rubber- or plastics-coated fabrics — Determination of coating adhesion
    ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
    DIN EN 20139:1992-09 TEXTILES - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING
    ISO 13938-2:1999 Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension
    DIN EN ISO 105-B02:2014-11 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST (ISO 105-B02:2014)
    ISO 12402-1:2005 Personal flotation devices Part 1: Lifejackets for seagoing ships Safety requirements
    ISO 2062:2009 Textiles Yarns from packages Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
    ISO 12402-2:2006 Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements
    DIN EN ISO 9073-4:1997-09 Test methods for nonwovens - Part 4: Determination of tear resistance (ISO 9073-4:1997)
    ISO 1926:2009 Rigid cellular plastics Determination of tensile properties
    ISO 105-E02:2013 Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water
    DIN EN ISO 5470-2:2003-10 Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2003)
    ISO 5470-2:2003 Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader
    ISO 12401:2009 Small craft — Deck safety harness and safety line — Safety requirements and test methods
    ISO 7854:1995 Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing
    ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
    ISO 7229:2015 Rubber- or plastics-coated fabrics — Measurement of gas permeability
    ISO 12402-6:2006 Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods
    ISO 12402-4:2006 Personal flotation devices Part 4: Lifejackets, performance level 100 Safety requirements
    DIN EN ISO 4892-1:2016-10 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
    ISO 105-X12:2016 Textiles Tests for colour fastness Part X12: Colour fastness to rubbing
    ISO 12402-10:2006 Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices
    ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
    ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
    ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
    DIN EN ISO 105-E02:2013-06 TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER (ISO 105-E02:2013)
    ISO 139:2005 Textiles Standard atmospheres for conditioning and testing
    ISO 1421:2016 Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
    DIN EN ISO 4674-1:2015-04 (Draft) RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 1: CONSTANT RATE OF TEAR METHODS (ISO 4674-1:2016)
    ISO 105-A02:1993 Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
    ISO 12947-2:2016 Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown
    ISO 13938-1:1999 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension
    DIN EN ISO 2062:2010-04 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester (ISO 2062:2009)
    DIN EN 20105-A02:1994-10 TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREY SCALE FOR ASSESSING CHANGE IN COLOUR
    ISO 4674-1:2016 Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods
    ASTM D 471 : 2016-02 TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
    ISO 105-B02:2014 Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
    EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective