DIN EN ISO 13934-1:2013-08
Current
Current
The latest, up-to-date edition.
TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013)
Available format(s)
Hardcopy , PDF
Language(s)
English, German
Published date
01-08-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Sampling
6 Apparatus
7 Atmosphere for conditioning and testing
8 Preparation of test specimen
9 Procedure
10 Calculation and expression of results
11 Test report
Annex A (informative) - Suggested procedure for sampling
Annex B (informative) - Locations of test specimens cut
from a laboratory sample
Bibliography
Defines a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method.
| Committee |
TC 38
|
| DevelopmentNote |
Supersedes DIN 53857-1 (10/1999)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 13934-1 : 2013 | Identical |
| EN ISO 13934-1:2013 | Identical |
| NEN EN ISO 13934-1 : 2013 | Identical |
| ISO 13934-1:2013 | Identical |
| BS EN ISO 13934-1:2013 | Identical |
| UNI EN ISO 13934-1 : 2013 | Identical |
| I.S. EN ISO 13934-1:2013 | Identical |
| UNE-EN ISO 13934-1:2013 | Identical |
| NBN EN ISO 13934-1 : 2013 | Identical |
| NS EN ISO 13934-1 : 2013 | Identical |
| SN EN ISO 13934-1 : 2013 | Identical |
| BWB TL 8305-0229 : 5ED 2000 | ELASTIC WARP KNITTED FABRICS FOR BATHING ARTICLES |
| DIN EN ISO 8936:2015-09 (Draft) | AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017) |
| DIN EN ISO 30023:2012-10 | Textiles - Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2010) |
| BWB TL 6510-0025 : 2ED 2009 | ADHESIVE BANDAGE, ELASTIC |
| BWB TL 8105-0009 : 5ED 2007 | |
| DIN EN ISO 5840-3:2013-06 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| DIN EN ISO 11611:2015-11 | PROTECTIVE CLOTHING FOR USE IN WELDING AND ALLIED PROCESSES (ISO 11611:2015) |
| BWB TL 8305-0300 : 4ED 2006 | ROT-PROOFING OF TEXTILES |
| BWB TL 8470-0068 : 4ED 2009 | ARMOR VEST, SPECIAL FORCES, 5 COLOR CAMOUFLAGE PRINT BUNDESWEHR |
| BWB TL 8305-0330 : 3ED 2004 | WASSERDAMPFDURCHLAESSIGE VERBUNDSTOFFE 3-LAGEN-LAMINATE FUER AUSRUESTUNG |
| BWB TL 8440-0015 : 7ED 2008 | NECK SCARF, BLACK (NAVY) |
| BWB TL 8305-0285 : 4ED 2008 | PIQUE |
| BWB TL 8440-0002 : 9ED SEP 2008 | NECKWEAR FOR DUTY AND DRESS UNIFORM |
| BWB TL 8305-0323 : 1ED 2003 | WASSERDAMPFDURCHLAESSIGE VERBUNDSTOFFE 4-LAGEN-LAMINATE FUER SCHUHE |
| BWB TL 8305-0196 : 8ED 2008 | LIGHTWEIGHT CLOTH FOR COATS |
| BWB TL 8305-0064 : 6ED 2009 | WOVEN FABRIC FOR SAILOR COLLAR, NAVY SHIRT |
| DIN EN ISO 11612:2015-11 | PROTECTIVE CLOTHING - CLOTHING TO PROTECT AGAINST HEAT AND FLAME - MINIMUM PERFORMANCE REQUIREMENTS (ISO 11612:2015) |
| DIN EN ISO 22610:2015-12 (Draft) | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES, FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - TEST METHOD TO DETERMINE THE RESISTANCE TO WET BACTERIAL PENETRATION |
| DIN EN ISO 21898:2005-12 | Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2004) |
| VDI 2083 Blatt 9.2:2017-01 | Cleanroom technology - Consumables in the cleanroom |
| VDI 2700 Blatt 15:2009-05 | Securing of loads on road vehicles - Slip-inhibiting materials |
| BWB TL 8305-0287 : 5ED 2014 | WATER VAPOUR PERMEABLE COMPOSITES, THREE-LAYER LAMINATED FABRIC FOR CLOTHING |
| BWB TL 8305-0333 : 3ED 2008 | WATER VAPOUR PERMEABLE COMPOSITES, TWO AND THREE-LAYER LAMINATED FABRIC FOR SHIPBOARD PARKA, FLAME-RETARDANT, ANTISTATIC |
| DIN EN ISO 14116:2015-11 | PROTECTIVE CLOTHING - PROTECTION AGAINST FLAME - LIMITED FLAME SPREAD MATERIALS, MATERIAL ASSEMBLIES AND CLOTHING (ISO 14116:2015) |
| BWB TL 8415-0279 : 4ED 2013 | WORK GLOVES, COLD-WEATHER-PROTECTIVE AND FOUL-WEATHER-PROTECTIVE, NAVY |
| BWB TL 8305-0071 : 6ED 2009 | LINEN DUCK |
| BWB TL 8415-0281 : 2ED 2008 | COVER, COMBAT HELMET, REVERSIBLE |
| BWB TL 8470-0070 : 4ED 2009 | BODY ARMOUR FOR SPECIAL FORCES, BLACK, MODIFIED |
| DIN EN ISO 20471:2013-09 | HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013, CORRECTED VERSION 2013-06-01 + AMD 1:2016) |
| DIN EN ISO 13934-2:2014-06 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014) |
| DIN EN ISO 22610:2006-10 | Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration (ISO 22610:2006) |
| BWB TL 1080-0031 : 1ED 2014 | SNOW CAMOUFLAGE PRINT TARPAULIN |
| BWB TL 8305-0324 : 4ED 2013 | WATER VAPOUR PERMEABLE COMPOSITES; 3-LAYER LAMINATES FOR GLOVES |
| BWB TL 8415-0310 : 2ED 2008 | WORK GLOVES, THREE-FINGER, LEATHER, ARAMIDE LINING |
| BWB TL 8305-0321 : 4ED 2013 | WOVEN POLYESTER FABRIC (PLAIN WEAVE) |
| BWB TL 8305-0103 : 9ED 2008 | UNIFORM FABRIC FOR THE DRESS UNIFORM OF THE NAVY |
| BWB TL 8465-0135 : 3ED 2009 | SLEEPING BAG, TROPICAL CLIMATIC CONDITIONS CLIMATIC CATEGORY A |
| DIN EN ISO 15027-2:2013-03 | Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
| DIN EN ISO 15027-1:2013-03 | Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
| DIN EN ISO 13935-2:2014-07 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014) |
| DIN EN ISO 13935-1:2014-07 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014) |
| BWB TL 6510-0039 : 2ED 2006 | |
| BWB TL 8465-0030 : 5ED 2012 | TROUSERS STRAP, FIELD TROUSERS |
| BWB TL 8305-0320 : 3ED 2005 | WOVEN POLYESTER-FABRIC (SERGE WEAVE) |
| BWB TL 8305-0129 : 6ED 2005 | WOVEN FABRIC FOR PYJAMAS |
| BWB TL 8470-0069 : 4ED 2009 | ARMOR VEST, SPECIAL FORCES, 3 COLOR CAMOUFLAGE PRINT BUNDESWEHR |
| BWB TL 8305-0185 : 6ED 2009 | LIGHT-WEIGHT UNIFORM CLOTH (SERGE) |
| BWB TL 8305-0042 : 9ED 2005 | POCKETING |
| BWB TL 8305-0032 : 8ED 2009 | COTTON CANVAS FOR EQUIPMENT ITEMS, HEAVY |
| DIN EN 13766:2010-11 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| DIN ISO 8936:2008-06 | AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS |
| ISO 13934-2:2014 | Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method |
| ISO 9073-3:1989 | Textiles — Test methods for nonwovens — Part 3: Determination of tensile strength and elongation |
| ISO 10319:2015 | Geosynthetics — Wide-width tensile test |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| DIN EN ISO 7500-1:2016-05 | METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (ISO 7500-1:2015) |
| ISO 4606:1995 | Textile glass Woven fabric Determination of tensile breaking force and elongation at break by the strip method |
| DIN EN ISO 13935-2:2014-07 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014) |
| DIN EN ISO 13934-2:2014-06 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014) |
| DIN EN ISO 10319:2015-09 | GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST (ISO 10319:2015) |
| DIN EN ISO 13935-1:2014-07 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014) |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 139:2005 | Textiles — Standard atmospheres for conditioning and testing |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| DIN ISO 3696:1991-06 | WATER FOR ANALYTICAL LABORATORY USE - SPECIFICATION AND TEST METHODS |
| ISO 13935-1:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.