DIN EN ISO 148-1:2015-09 (Draft)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016)
Hardcopy , PDF
07-03-2021
German
01-01-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
National Annex NA (informative) - Examples of
designations
National Annex NB (informative) - Bibliography
European foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Principles of the test
6 Test pieces
7 Test equipment
8 Test procedure
9 Test report
Annex A (informative) - Self-centring tongs
Annex B (informative) - Lateral expansion
Annex C (informative) - Fracture appearance
Annex D (informative) - Absorbed energy vs
temperature curve and the transition
temperature
Annex E (informative) - Measurement uncertainty
of an absorbed energy value, K
Bibliography
Defines the Charpy (V-notch and U-notch) pendulum impact test method for determining the energy absorbed in an impact test of metallic materials.
| DevelopmentNote |
Supersedes DIN EN 10045-1. (01/2011) Supersedes DIN 50115. (02/2014)
|
| DocumentType |
Draft
|
| Pages |
72
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| EN ISO 148-1:2016 | Identical |
| ISO 148-1:2016 | Identical |
| DIN ISO 8082-1:2016-06 | Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - Part 1: General machines (ISO 8082-1:2009) |
| DIN ISO 8082-2:2016-06 | SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 2: MACHINES HAVING A ROTATING PLATFORM WITH A CAB AND BOOM ON THE PLATFORM (ISO 8082-2:2011) |
| DIN EN ISO 11120:2015-05 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING (ISO 11120:2015) |
| DIN 21057-12:2015-07 (Draft) | PIPE CLASSES FOR PROCESS PLANTS - PART 12: TECHNICAL DELIVERY CONDITIONS FOR PIPE COMPONENTS OF NON ALLOYED AND ALLOYED STEEL WITH SPECIFIED PROPERTIES AT ELEVATED TEMPERATURES OF MATERIAL GROUP 1.2 AND 5.1 |
| DIN ISO 8083:2016-06 | MACHINERY FOR FORESTRY - FALLING-OBJECT PROTECTIVE STRUCTURES (FOPS) - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS (ISO 8083:2006) |
| DIN EN ISO 9809-3:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN ISO 14556:2016-02 | METALLIC MATERIALS - CHARPY V-NOTCH PENDULUM IMPACT TEST - INSTRUMENTED TEST METHOD (ISO 14556:2015) |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| KTA 1408.3 : 2015 | QUALITY ASSURANCE OF WELD FILLER METALS AND WELDING CONSUMABLES FOR PRESSURE AND ACTIVITY-RETAINING SYSTEMS IN NUCLEAR POWER PLANTS - PART 3: PROCESSING |
| DIN EN ISO 148-2:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 2: VERIFICATION OF TESTING MACHINES (ISO 148-2:2016) |
| DIN EN ISO 148-1 Beiblatt 1:2014-02 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD; SUPPLEMENT 1: SPECIAL TEST PIECES |
| DIN EN ISO 148-3:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| DIN 21530-4:2016-09 | MINE SUPPORT - PART 4: TESTING |
| DIN 21530-3:2016-09 | MINE SUPPORT - PART 3: REQUIREMENTS |
| DIN EN ISO 9809-1:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| DIN EN ISO 9016:2013-02 | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012) |
| KTA 3204 : 2015 | |
| DIN HDBK 15-5 : 7ED 2013 | |
| DIN HDBK 19 : 17ED 2015 | MATERIALPRUEFNORMEN FUER METALLISCHE WERKSTOFFE 1 - MECHANISCH-TECHNOLOGISCHE PRUEFVERFAHREN (ERZEUGNISFORMUNABHAENGIG), PRUEFMASCHINEN |
| DIN EN ISO 9809-2:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| DIN EN ISO 286-1:2010-11 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS |
| ISO 14556:2015 | Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method |
| ISO 148-2:2016 | Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines |
| DIN EN ISO 3785:2006-05 | Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006) |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| ISO 148-3:2016 | Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
| ISO 3785:2006 | Metallic materials — Designation of test specimen axes in relation to product texture |
| DIN EN ISO 148-2:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 2: VERIFICATION OF TESTING MACHINES (ISO 148-2:2016) |
| DIN EN ISO 148-3:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| DIN EN ISO 14556:2016-02 | METALLIC MATERIALS - CHARPY V-NOTCH PENDULUM IMPACT TEST - INSTRUMENTED TEST METHOD (ISO 14556:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.