Skip to content
Please enter a keyword to search

  • ISO 760:1978

    Current The latest, up-to-date edition.

    Determination of water Karl Fischer method (General method)

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  01-12-1978

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Two methods of titration depending on whether the end point is detected visually or electrometrically are specified. The visual method is only applicable to colourless solutions but can be used when no electrometric apparatus is available. The electrometric method, whether by direct titration or back-titration, is the more accurate one and for this reason recommended. The principle of the test consists in reaction of any water present in a test portion with a solution of iodine and sulphur dioxide in a pyridine/methanol mixture (Karl Fischer reagent), previously standardized by titration with an exactly known mass of water.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher International Organization for Standardization
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS 576-2:1988 Acetic acid for industrial use Methods of test for acetic acid
    BS 509-2:1984 Acetone for industrial use Methods of test
    SAE AMS 2980/4 : 2014 CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 4 - PURCHASING SPECIFICATION - RESIN
    BS 684-2.1:1976 Methods of analysis of fats and fatty oils. Other methods. Determination of water by the Karl Fischer method
    BS ISO 15512 : 1999 AMD 14837 PLASTICS - DETERMINATION OF WATER CONTENT
    ISO 4020:2001 Road vehicles — Fuel filters for diesel engines — Test methods
    BS ISO 12922 : 99 AMD 13874 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU
    DIN EN 16682 E : 2017 CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE
    ISO 4020-1:1979 Road vehicles — Fuel filters for automotive compression ignition engines — Part 1: Test methods
    BS 4993-5:1980 Methods of test for aluminium fluoride for industrial use Determination of moisture content (Karl Fischer method)
    DD ISO/TS 11365:2011 Petroleum and related products. Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids
    BS ISO 4020:2001 Road vehicles. Fuel filters for diesel engines.Test methods
    07/30144836 DC : 0 EN ISO 15512 - PLASTICS - DETERMINATION OF WATER CONTENT
    12/30259884 DC : 0 BS EN ISO 3452-2 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS
    DIN EN 15692:2009-08 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method
    BS ISO 14900:2017 Plastics. Polyols for use in the production of polyurethane. Determination of hydroxyl number
    EN ISO 3452-2:2013 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS (ISO 3452-2:2013)
    BS 3900-A24(2000) : 2000 AMD 13286 METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A24: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A GAS CHROMATOGRAPHIC METHOD
    04/30126883 DC : DRAFT DEC 2004 ISO 4437 - BURIED POLYETHYLENE (PE) PIPES FOR THE SUPPLY OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS
    EN 1555-1:2010 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
    SAE AMS 2950/1 : 2008 PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS
    I.S. EN 61221:2004 PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS
    ISO 1388-1:1981 Ethanol for industrial use — Methods of test — Part 1: General
    ISO 17494:2001 Aromatic extracts, flavouring and perfuming compounds Determination of ethanol content Gas chromatographic method on packed and capillary columns
    ISO 4317:2011 Surface-active agents and detergents — Determination of water content — Karl Fischer methods
    UNI EN 1555-1 : 2011 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
    DIN EN ISO 11890-2:2013-07 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
    ISO 14900:2017 Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number
    DIN EN 14998 E : 2005 DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: FLUXING OILS - SPECIFICATIONS AND TEST METHODS
    DIN EN ISO 4491-3:2006-06 Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997)
    DIN EN 12201-1:2011-11 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
    UNE-EN 16245-2:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
    BS EN 13244-1:2002 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) General
    BS EN 14998:2005 Derivatives from coal pyrolysis. Coal tar based oils: fluxings oils. Specifications and test methods
    BS EN ISO 3452-2:2013 Non-destructive testing. Penetrant testing Testing of penetrant materials
    EN ISO 12922:2012 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012)
    BS EN ISO 9369:1997 Plastics. Basic materials for polyurethanes. Pure isocyanates. Analysis of isocyanate groups
    BS EN ISO 12922:2012 Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
    BS EN 1555-1:2010 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
    BS EN 13991:2003 Derivatives from coal pyrolysis. Coal tar based oils. Creosotes. Specifications and test methods
    EN 12201-1:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
    DIN EN 15536:2007-06 Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods
    DIN EN 13244-1:2003-04 PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: GENERAL
    EN 13244-1:2002 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General
    EN 1019:2005 Chemicals used for treatment of water intended for human consumption - Sulfur dioxide
    DIN EN ISO 15512:2017-03 PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016)
    EN 12123:2012 Chemicals used for treatment of water intended for human consumption - Ammonium sulfate
    DIN EN 14998:2005-04 Derivatives from coal pyrolysis - Coal tar based oils: fluxing oils - Specifications and test methods
    DIN EN ISO 3672-2:2002-07 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    10/30227632 DC : 0 BS ISO 4317 - SURFACE-ACTIVE AGENTS AND DETERGENTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD
    05/30098184 DC : DRAFT MAY 2005 ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES
    BS 5050-9(1980) : 1980 METHODS OF TEST FOR CRYOLITE - DETERMINATION OF MOISTURE CONTENT (KARL FISHER METHOD)
    BS EN ISO 14446:2010 Binders for paints and varnishes. Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions
    BS ISO 17322:2015 Fertilizers and soil conditioners. Analytical methods for Sulfur Coated Urea (SCU)
    BS ISO 8068:2006 Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines
    BS ISO 11021:1999 Essential oils. Determination of water content. Karl Fischer method
    ISO/TS 16332:2006 Diesel engines Fuel filters Method for evaluating fuel/water separation efficiency
    11/30239977 DC : 0 BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS
    I.S. EN 13244-1:2002 PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - GENERAL
    DIN EN 16245-2:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
    93/708490 DC : 0 PREN 3840 - AEROSPACE SERIES - PAINTS AND VARNISHES TECHNICAL SPECIFICATION
    BS ISO 2596:2006 Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric, Karl Fischer and mass-loss methods
    12/30258200 DC : 0 BS EN 12123 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE
    PD CEN/TR 14548:2003 Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
    PREN ISO 15512 : DRAFT 2013 PLASTICS - DETERMINATION OF WATER CONTENT (ISO/DIS 15512:2013)
    PREN 12123 : DRAFT 2012 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE
    08/30178054 DC : DRAFT FEB 2008 BS EN ISO 12922 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU
    BS EN 61221:2004 Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications
    UNE-EN ISO 15494:2016 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
    ISO 8068:2006 Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines
    DIN EN 16028:2012-10 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
    BS ISO 12492:2012 Rubber, raw. Determination of water content by Karl Fischer method
    04/30098945 DC : DRAFT OCT 2004 EN ISO 3452-2 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS
    BS EN ISO 15494:2015 Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system
    SAE AMS 2980/1 : 2014 CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 1 - GENERAL REQUIREMENTS
    PREN 3840 : 200P2 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
    EN ISO 15512:2016 Plastics - Determination of water content (ISO 15512:2016)
    ISO 4437-1:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General
    NF EN ISO 14446 : 2011 BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS
    NF ISO 10050 : 2006 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS OF TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD)
    I.S. EN ISO 15512:2016 PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016)
    I.S. EN 15692:2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
    DIN EN ISO 12922:2013-04 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012)
    DIN EN 15536 E : 2007 DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: WASH OILS - SPECIFICATIONS AND TEST METHODS
    BS EN ISO 10082:2000 Plastics. Phenolic resins. Classification and test methods
    ISO 5381:1983 Starch hydrolysis products Determination of water content Modified Karl Fischer method
    UNE-EN ISO 11890-2:2013 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013)
    BS EN ISO 11890-1:2007 Paints and varnishes. Determination of volatile organic compound (VOC) content Difference method
    BS EN 15536:2007 Derivatives from coal pyrolysis. Coal tar based oils. Wash oils. Specifications and test methods
    BS EN 14156:2003 Derivatives from coal pyrolysis. Coal tar based oils. Coal tar fuel. Specifications and test methods
    EN ISO 11890-2:2013 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
    I.S. EN ISO 3452-2:2013 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS (ISO 3452-2:2013)
    I.S. EN 1019:2005 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SULPHUR DIOXIDE
    I.S. EN 12201-1:2011 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
    I.S. EN ISO 11890-1:2007 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD
    I.S. EN 1555-1:2010-2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
    ONORM EN ISO 11890-2 : 2013 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
    I.S. EN 12123:2012 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE
    ONORM EN 12123 : 2013 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE
    I.S. EN 3840:2007 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
    ISO 17322:2015 Fertilizers and soil conditioners Analytical methods for Sulfur Coated Urea (SCU)
    BS ISO 10050:2005 Lubricants, industrial oils and related products (class L). Family T (Turbines). Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)
    UNI EN 15692 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
    PREN 1279-4 : DRAFT 2015 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS
    06/30154367 DC : DRAFT AUG 2006 EN 15536 - DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS, WASH OILS - SPECIFICATIONS AND TEST METHODS
    12/30256736 DC : 0 BS ISO 4437-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
    03/303313 DC : DRAFT APR 2003 EN 14639 - CRUDE TAR AND CRUDE BENZOLE - CHARACTERISTICS AND TEST METHODS
    08/30191143 DC : 0 BS EN 1555-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
    BS ISO 3672-2 : 2000 AMD 13326 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    DIN EN ISO 14446:2011-02 Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999)
    BS 3900-A23(2000) : 2000 AMD 13285 METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A 23: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A DIFFERENCE METHOD
    16/30323482 DC : 0 BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS
    BS ISO 4437-1:2014 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
    ISO 15494:2015 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system
    ISO 11500:2008 Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
    EN 15692:2009 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method
    I.S. EN 16245-2:2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
    ISO 11365:2017 Petroleum and related products — Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids
    UNE-EN ISO 14446:2011 Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999)
    I.S. EN 16028:2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
    ISO/TS 11365:2011 Petroleum and related products Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids
    EN 1279-2:2002 Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration
    ISO 20492-1:2008 Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests
    UNE-EN ISO 3452-2:2014 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013)
    DIN EN ISO 3672-2 E : 2002 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    DIN EN 1555-1:2010-12 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
    DIN EN 1019:2005-08 Chemicals used for treatment of water intended for human consumption - Sulfur dioxide
    DIN EN 14639 E : 2005 CRUDE TAR AND CRUDE BENZOLE - CHARACTERISTICS AND TEST METHODS
    DIN EN ISO 11890-1:2007-09 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD
    DIN EN 12123:2013-02 Chemicals used for treatment of water intended for human consumption - Ammonium sulfate
    DIN EN ISO 3452-2:2014-03 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013)
    BS EN ISO 5381:1994 Starch hydrolysis products. Determination of water content. Modified Karl Fischer method
    BS EN 12201-1:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General
    UNI EN ISO 12922 : 2013 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU
    I.S. EN ISO 11890-2:2013 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
    UNI EN ISO 11890-2 : 2013 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD
    EN 14998:2005 Derivatives from coal pyrolysis - Coal tar based oils: fluxings oils - Specifications and test methods
    EN 14156:2003 Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods
    EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
    UNI EN 16028 : 2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
    UNI EN 16245-2 : 2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
    UNI EN 12123 : 2013 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE
    UNI EN 12201-1 : 2012 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
    ONORM EN 16028 : 2013 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
    13/30265463 DC : 0 BS ISO 17197 - DIMETHYL ETHER (DME) FOR FUELS - DETERMINATION OF WATER CONTENT - KARL FISCHER TITRATION METHOD
    13/30212494 DC : 0 BS EN ISO 15494 - PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES
    10/30212144 DC : 0 BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
    ISO 5787:1979 Methyl chloride and ethyl chloride for industrial use — Methods of test
    PREN ISO 15494 : DRAFT 2013 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO/DIS 15494:2013)
    ISO 11021:1999 Essential oils Determination of water content Karl Fischer method
    UNI EN ISO 14446 : 2011 BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS
    BS EN 16245-2:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers
    BS EN 16028:2012 Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications
    BS 6782-11(1999) : 1999 BINDERS FOR PAINTS - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND THEIR CLASSIFICATION
    BS ISO 11500:2008 Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
    09/30207718 DC : 0 BS ISO 7745 - HYDRAULIC FLUID POWER - FIRE-RESISTANT (FR) FLUIDS - GUIDELINES FOR USE
    03/300973 DC : DRAFT JAN 2003 ISO 6488 - TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD
    BS ISO 17197:2014 Dimethyl ether (DME) for fuels. Determination of water content. Karl Fischer titration method
    BS EN 16682:2017 Conservation of cultural heritage. Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage
    13/30266500 DC : 0 BS EN ISO 15512 - PLASTICS - DETERMINATION OF WATER CONTENT (ISO/DIS 15512:2013)
    BS EN ISO 15512:2016 Plastics. Determination of water content
    DIN ISO 4491-3:1998-07 METALLIC POWDERS - DETERMINATION OF OXYGEN CONTENT BY REDUCTION METHODS - PART 3: HYDROGEN-REDUCIBLE OXYGEN
    I.S. EN ISO 15494:2015 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
    ISO 6191:1981 Light olefins for industrial use Determination of traces of water Karl Fischer method
    BS EN 60464-2:2001 Varnishes used for electrical insulation Methods of test
    I.S. EN ISO 14446:2010 BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS
    UNE-EN ISO 15512:2017 Plastics - Determination of water content (ISO 15512:2016)
    I.S. CEN TR 14548:2003 ADHESIVES - GUIDE TO TEST METHODS AND OTHER STANDARDS FOR THE GENERAL REQUIREMENTS, CHARACTERIZATION AND SAFETY OF STRUCTURAL ADHESIVES
    ISO 15512:2016 Plastics Determination of water content
    DIN EN 16682:2016-01 (Draft) CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE
    I.S. EN 16682:2017 CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE
    15/30319712 DC : 0 BS EN 1279-4 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS
    ISO 2596:2006 Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric, Karl Fischer and mass-loss methods
    BS EN 1279-2:2002 Glass in building. Insulating glass units Long term test method and requirements for moisture penetration
    DIN EN ISO 15494:2016-03 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
    SAE AMS 2950/1 : 2008(R2019) PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS
    BIS IS 16029 : 2012 ROASTED GROUND COFFEE - DETERMINATION OF MOISTURE CONTENT - KARL FISCHER METHOD (REFERENCE METHOD)
    ISO 10050:2005 Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)
    I.S. EN 1279-2:2002 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 2: LONG TERM TEST METHOD AND REQUIREMENTS FOR MOISTURE PENETRATION
    BS EN ISO 10101-1:1998 Natural gas. Determination of water by the Karl Fischer method Introduction
    UNE-EN ISO 12922:2013 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012)
    UNE-EN 16028:2013 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
    ISO 960:1988 Plastics — Polyamides (PA) — Determination of water content
    BS EN 14639:2005 Crude tar and crude benzole. Characteristics and test methods
    ISO 11890-2:2013 Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method
    BS EN 1019:2005 Chemicals used for treatment of water intended for human consumption. Sulfur dioxide
    BS EN ISO 3672-2:2001 Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties
    BS EN ISO 11890-2:2013 Paints and varnishes. Determination of volatile organic compound (VOC) content Gas-chromatographic method
    BS EN 14155:2003 Derivatives from coal pyrolysis. Carbon black feedstock. Specifications and test methods
    ISO 9369:1997 Plastics Basic materials for polyurethanes Pure isocyanates Analysis of isocyanate groups
    UNE-EN 1555-1:2011 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
    IEC 60464-2:2001+AMD1:2006 CSV Varnishes used for electrical insulation - Part 2: Methods of test
    I.S. EN ISO 12922:2012 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012)
    ISO 4491-3:1997 Metallic powders — Determination of oxygen content by reduction methods — Part 3: Hydrogen-reducible oxygen
    IEC 61221:2004 Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications
    ISO 3672-2:2000 Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
    BS EN ISO 7327:1997 Plastics. Hardeners and accelerators for epoxide resins. Determination of free acid in acid anhydride
    ISO 7327:1994 Plastics Hardeners and accelerators for epoxide resins Determination of free acid in acid anhydride
    BS EN 12123:2012 Chemicals used for treatment of water intended for human consumption. Ammonium sulfate
    UNE-EN 12123:2013 Chemicals used for treatment of water intended for human consumption - Ammonium sulfate
    ISO 11890-1:2007 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method
    BS EN ISO 4491-3:2006 Metallic powders. Determination of oxygen content by reduction methods Hydrogen-reducible oxygen
    ISO 14446:1999 Binders for paints and varnishes — Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions
    EN ISO 7327 : 1997 PLASTICS - HARDENERS AND ACCELERATORS FOR EPOXIDE RESINS - DETERMINATION OF FREE ACID IN ACID ANHYDRIDE
    EN 16028:2012 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
    EN 16682:2017 Conservation of cultural heritage - Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage
    EN ISO 3672-2 : 2001 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    EN ISO 4491-3 : 2006 Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997)
    EN 3840:2007 Aerospace series - Paints and varnishes - Technical specification
    EN ISO 960 : 1997 PLASTICS - POLYAMIDES (PA) - DETERMINATION OF WATER CONTENT
    EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
    EN ISO 5381:1994 Starch hydrolysis products - Determination of water content - Modified Karl Fischer method (ISO 5381:1983)
    EN 14155:2003 Derivatives from coal pyrolysis - Carbon black feedstock - Specifications and test methods
    EN 14639:2005 Crude tar and crude benzole - Characteristics and test methods
    EN 13991:2003 DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: CREOSOTES - SPECIFICATIONS AND TEST METHODS
    EN ISO 9369 : 1997 PLASTICS - BASIC MATERIALS FOR POLYURETHANES - PURE ISOCYANATES - ANALYSIS OF ISOCYANATE GROUPS
    EN ISO 14446:2010 Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999)
    EN 15536:2007 Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods
    DIN EN 16028 E : 2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
    BS ISO 7745:2010 Hydraulic fluid power. Fire-resistant FR) fluids. Requirements and guidelines for use
    DIN EN 15692 E : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
    BS ISO 18237:2017 Hydraulic fluid power. Method for evaluating water separation performance of dehydrators
    BS 2782-4.433E(1996) : AMD 9699 METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF FREE ACID IN ACID ANHYDRIDE FOR HARDENERS AND ACCELERATORS IN EPOXIDE RESINS
    BS ISO 11365:2017 Petroleum and related products. Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids
    I.S. EN ISO 9369:1997 PLASTICS - BASIC MATERIALS FOR POLYURETHANES - PURE ISOCYANATES - ANALYSIS OF ISOCYANATE GROUPS
    NF ISO 28641 : 2010 RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS
    DIN EN 3840:2007-10 Aerospace series - Paints and varnishes - Technical specification; German and English version EN 3840:2007
    13/30253060 DC : 0 BS ISO 17322 - FERTILIZERS AND SOIL CONDITIONERS - SULFUR COATED UREA (SCU) - ANALYTICAL METHODS
    16/30268528 DC : 0 BS ISO 18237 - HYDRAULIC FLUID POWER - METHOD FOR EVALUATING WATER SEPARATION PERFORMANCE OF DEHYDRATORS
    07/30164620 DC : 0 BS EN 15692 - ETHANOL AS A BLENDING COMPONENT FOR GASOLINE - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
    BS ISO 28641:2010 Rubber compounding ingredients. Organic chemicals. General test methods
    BS EN 3840:2007 Aerospace series. Paints and varnishes. Technical specification
    BS EN 15692:2009 Ethanol as a blending component for petrol. Determination of water content. Karl Fischer potentiometric titration method
    05/30046519 DC : 0 ISO 2596 - IRON ORES - DETERMINATION OF HYGROSCOPIC MOISTURE IN ANALYTICAL SAMPLES - GRAVIMETRIC, KARL FISCHER AND MASS-LOSS METHODS
    NF EN 16682 : 2017 CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE
    NF ISO 8068 : 2006 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES
    ISO 7745:2010 Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use
    EN ISO 15494:2015 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
    ISO 11817:1994 Roasted ground coffee Determination of moisture content Karl Fischer method (Reference method)
    ISO 12492:2012 Rubber, raw — Determination of water content by Karl Fischer method
    NF EN 1279-2 : 2003 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 2: LONG TERM TEST METHOD AND REQUIREMENTS FOR MOISTURE PENETRATION
    DIN EN ISO 15512:2016-06 (Draft) PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016)
    BS 2000-572(2009) : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
    ISO 10933:1997 Polyethylene (PE) valves for gas distribution systems
    ISO 12922:2012 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
    UNE-EN 12201-1:2012 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
    ISO 3452-2:2013 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials
    BS EN ISO 960:1998 Plastics. Polyamides (PA). Determination of water content
    ONORM EN 1555-1 : 2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
    CEN/TR 14548:2003 Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
    DIN EN 14156:2003-11 DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: COAL TAR FUEL - SPECIFICATIONS AND TEST METHODS
    DIN EN 14155:2003-11 DERIVATIVES FROM COAL PYROLYSIS - CARBON BLACK FEEDSTOCK - SPECIFICATIONS AND TEST METHODS
    EN 60464-2:2001/A1:2006 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
    DIN EN 14639:2005-11 Crude tar and crude benzole - Characteristics and test methods; German version EN 14639:2005
    UNI EN ISO 3452-2 : 2014 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS
    EN 61221:2004 Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications

    Standards Referencing This Book - (Show below) - (Hide below)

    UNE-EN ISO 15494:2019 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective