DIN EN ISO 7599:2010-12
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM
Hardcopy , PDF
07-03-2021
English
01-01-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Bestellangaben des Kunden für den
Anodisierbetrieb
4.1 Allgemeines
4.2 Wesentliche Angaben
4.3 Zusätzliche Angaben
5 Prüfungen
5.1 Probenahmeverfahren
5.2 Proben
5.3 Abnahmeprüfungen
5.4 Schiedsprüfungen
5.5 Produktionsüberwachungsprüfungen
6 Schichtdicke
6.1 Allgemeines
6.2 Einteilung
6.3 Messung der Dicke
7 Qualität der Verdichtung
7.1 Allgemeines
7.2 Beurteilung der Qualität der hydrothermalen
Verdichtung
7.2.1 Schiedsprüfung
7.2.2 Produktionsüberwachungsprüfungen
7.3 Beurteilung der Qualität der Kaltverdichtung
8 Aussehen und Farbe
8.1 Sichtbare Fehler
8.2 Farbe und Oberflächenstruktur
8.3 Produktionsüberwachung
9 Korrosionsbeständigkeit
10 Abriebbeständigkeit
11 Beständigkeit gegen Rissbildung bei Verformung
12 Beständigkeit gegen Licht und ultraviolette Strahlung
12.1 Allgemeines
12.2 Beständigkeit gegen Licht
12.3 Beständigkeit gegen ultraviolette Strahlung
13 Lichtreflexionseigenschaften
13.1 Allgemeines
13.2 Gesamter Reflexionsgrad
13.3 Gerichteter Reflexionsgrad (Hochglanz)
13.4 Spiegelglanz (mittlerer oder geringer Glanz)
13.5 Diffuser Reflexionsgrad
13.6 Abbildungsschärfe
14 Durchschlagspannung
15 Kontinuität der Schicht
16 Masse je Flächeneinheit (flächenbezogene
Masse) der Schicht
Anhang A (informativ) Leitfaden für die zur Anodisierung
vorgesehenen Aluminiumsorten
A.1 Allgemeines
A.2 Für das Bauwesen geeignete und
dekorative Qualitäten
A.3 Glanzanodisierte Qualitäten
A.4 Allgemeine technische Aluminiumsorten
Anhang B (informativ) Leitfaden zur
Oberflächenvorbehandlung
B.1 Allgemeines
B.2 Oberflächenstruktur
B.3 Bezeichnungssystem für die Vorbehandlung
der Oberfläche
Anhang C (normativ) Auswertung nach den Anforderungen
an die mittlere und örtliche
Schichtdicke
Anhang D (informativ) Normprüftafeln zur Kalibrierung
der Prüfeinrichtung für Messungen der
Dicke von anodisch erzeugten Oxidschichten
auf Aluminium und Aluminiumlegierungen
D.1 Anwendungsbereich
D.2 Begriffe
D.3 Prüftafelspezifikation
D.3.1 Instandhaltungsnormal
D.3.2 Kalibriernormale
Anhang E (informativ) Leitfaden für Reinigungsmittel
für Aussenanwendungen im Bauwesen
E.1 pH-Wert der Reinigungsmittel
E.2 Abrasive Reinigungsmittel
Anhang F (informativ) Zusammenstellung der Bestellangaben
des Kunden für den Anodisierbetrieb
This standard is included in DIN Handbook 450/4.
| DevelopmentNote |
Supersedes DIN EN 12373-1. (12/2010) DRAFT 2017 issued in February 2017. (02/2017)
|
| DocumentType |
Standard
|
| Pages |
29
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 7599:2010 | Identical |
| EN ISO 7599:2018 | Identical |
| DIN EN ISO 7441:2015-04 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN ATMOSPHERIC EXPOSURE CORROSION TESTS (ISO 7441:2015) |
| DIN HDBK 450/4 : 1ED 2012 | |
| DIN EN ISO 11130:2010-12 | CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION |
| ISO 3210:2017 | Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) |
| ISO 8993:2010 | Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Chart method |
| ISO 10215:2010 | Anodizing of aluminium and its alloys Visual determination of image clarity of anodic oxidation coatings Chart scale method |
| ISO 7759:2010 | Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer |
| ISO 3211:2010 | Anodizing of aluminium and its alloys Assessment of resistance of anodic oxidation coatings to cracking by deformation |
| ISO 7668:2010 | Anodizing of aluminium and its alloys Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees |
| ISO 2106:2011 | Anodizing of aluminium and its alloys Determination of mass per unit area (surface density) of anodic oxidation coatings Gravimetric method |
| ISO 8994:2011 | Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Grid method |
| ISO 10074:2010 | Anodizing of aluminium and its alloys Specification for hard anodic oxidation coatings on aluminium and its alloys |
| ISO 8251:2011 | Anodizing of aluminium and its alloys Measurement of abrasion resistance of anodic oxidation coatings |
| ISO 2376:2010 | Anodizing of aluminium and its alloys Determination of electric breakdown potential |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| DIN EN ISO 2360:2016-05 (Draft) | NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD (ISO 2360:2017) |
| ISO 2128:2010 | Anodizing of aluminium and its alloys — Determination of thickness of anodic oxidation coatings — Non-destructive measurement by split-beam microscope |
| ISO 10216:2017 | Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method |
| ISO 2143:2017 | Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment |
| ISO 7583:2013 | Anodizing of aluminium and its alloys — Terms and definitions |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 2085:2010 | Anodizing of aluminium and its alloys Check for continuity of thin anodic oxidation coatings Copper sulfate test |
| ISO 6719:2010 | Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| ISO 2931:2010 | Anodizing of aluminium and its alloys Assessment of quality of sealed anodic oxidation coatings by measurement of admittance |
| ISO 6581:2010 | Anodizing of aluminium and its alloys Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings |
| ISO 2107:2007 | Aluminium and aluminium alloys — Wrought products — Temper designations |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
| ISO 2135:2017 | Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.