DIN ISO 10109-8:2007-02
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
OPTICS AND PHOTONICS - ENVIRONMENTAL REQUIREMENTS - PART 8: TEST REQUIREMENTS FOR EXTREME CONDITIONS OF USE
Hardcopy , PDF
01-12-2015
English
01-01-2007
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Unterteilung der Geräte für extreme Anwendungsbedingungen
5 Bezeichnung von Umweltanforderungen und -prüfungen
6 Typprüfung auf der Basis von technischen Anforderungen
Das Dokument gilt für optische Geräte und Geräte mit optischen Baugruppen unter extremen Anwendungsbedingungen. Sie stellt Anforderungen an die Beständigkeit der optischen, mechanischen, chemischen und elektrischen Eigenschaften oder Leistungsdaten der Geräte gegenüber Umwelteinflüssen und legt damit geographische und technische Einsatzbereiche fest. Sie ist die Basis für die Festlegung von Umweltanforderungen und Umweltprüfungen in Einzelvorschriften. Befasst sich nicht mit den Anforderungen an die Verpackung der Geräte während des Transports vom Hersteller zum Anwender.
DevelopmentNote |
Supersedes DIN 58391-8 (08/2002)
|
DocumentType |
Standard
|
Pages |
16
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
ISO 10109-8:2005 | Identical |
DIN ISO 10109-6:2007-02 | OPTICS AND PHOTONICS - ENVIRONMENTAL REQUIREMENTS - PART 6: TEST REQUIREMENTS FOR MEDICAL OPTICAL INSTRUMENTS |
DIN ISO 10109-1:2007-02 | OPTICS AND PHOTONICS - ENVIRONMENTAL REQUIREMENTS - PART 1: GENERAL OVERVIEW, TERMS AND DEFINITIONS, CLIMATIC ZONES AND THEIR PARAMETERS |
DIN ISO 9022-12:2016-02 | OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 12: CONTAMINATION (ISO 9022-12:2015) |
DIN ISO 9022-2:2015-06 | Optics and photonics - Environmental test methods - Part 2: Cold, heat and humidity (ISO 9022-2:2015) |
DIN ISO 9022-11:2016-02 | OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 11: MOULD GROWTH (ISO 9022-11:2015) |
DIN ISO 9022-14:2016-02 | OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 14: DEW, HOARFROST, ICE (ISO 9022-14:2015) |
DIN ISO 9022-13:2001-05 | OPTICS AND OPTICAL INSTRUMENTS - ENVIRONMENTAL TEST METHODS - PART 13: COMBINED SHOCK, BUMP OR FREE FALL AND DRY HEAT OR COLD |
ISO 9022-7:2015 | Optics and photonics Environmental test methods Part 7: Resistance to drip or rain |
DIN ISO 9022-19:2001-05 | OPTICS AND OPTICAL INSTRUMENTS - ENVIRONMENTAL TEST METHODS - PART 19: TEMPERATURE CYCLES COMBINED WITH SINUSOIDAL OR RANDOM VIBRATION |
ISO 9022-12:2015 | Optics and photonics — Environmental test methods — Part 12: Contamination |
ISO 9022-3:2015 | Optics and photonics Environmental test methods Part 3: Mechanical stress |
ISO 9022-18:1994 | Optics and optical instruments Environmental test methods Part 18: Combined damp heat and low internal pressure |
ISO 9022-2:2015 | Optics and photonics Environmental test methods Part 2: Cold, heat and humidity |
ISO 9022-11:2015 | Optics and photonics Environmental test methods Part 11: Mould growth |
DIN ISO 9022-9:2015-05 (Draft) | OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 9: SOLAR RADIATION AND WEATHERING (ISO 9022-9:2016) |
DIN ISO 9022-10:2000-09 | OPTICS AND OPTICAL INSTRUMENTS - ENVIRONMENTAL TEST METHODS - PART 10: COMBINED SINUSOIDAL VIBRATION AND DRY HEAT OR COLD |
DIN ISO 9022-7:2015-08 | OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 7: RESISTANCE TO DRIP OR RAIN (ISO 9022-7:2015) |
ISO 9022-13:1998 | Optics and optical instruments Environmental test methods Part 13: Combined shock, bump or free fall and dry heat or cold |
DIN ISO 9022-20:2015-06 | OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 20: HUMID ATMOSPHERE CONTAINING SULFUR DIOXIDE OR HYDROGEN SULFIDE (ISO 9022-20:2015) |
ISO 9022-9:2016 | Optics and photonics Environmental test methods Part 9: Solar radiation and weathering |
DIN ISO 9022-1:2016-12 | OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 1: DEFINITIONS, EXTENT OF TESTING (ISO 9022-1:2016) |
ISO 9022-4:2014 | Optics and photonics — Environmental test methods — Part 4: Salt mist |
ISO 9022-10:1998 | Optics and optical instruments Environmental test methods Part 10: Combined sinusoidal vibration and dry heat or cold |
ISO 10109-1:2005 | Optics and photonics Environmental requirements Part 1: General overview, terms and definitions, climatic zones and their parameters |
ISO 9022-16:1998 | Optics and optical instruments Environmental test methods Part 16: Combined bounce or steady-state acceleration and dry heat or cold |
DIN ISO 10109-4:2002-06 | OPTICS AND OPTICAL INSTRUMENTS - ENVIRONMENTAL REQUIREMENTS - PART 4: TEST REQUIREMENTS FOR TELESCOPIC SYSTEMS |
ISO 9022-5:1994 | Optics and optical instruments Environmental test methods Part 5: Combined cold, low air pressure |
DIN ISO 9022-6:2015-08 | OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 6: DUST (ISO 9022-6:2015) |
ISO 9022-1:2016 | Optics and photonics Environmental test methods Part 1: Definitions, extent of testing |
ISO 9022-14:2015 | Optics and photonics — Environmental test methods — Part 14: Dew, hoarfrost, ice |
ISO 9022-8:2015 | Optics and photonics Environmental test methods Part 8: High internal pressure, low internal pressure, immersion |
DIN ISO 10109-6:2007-02 | OPTICS AND PHOTONICS - ENVIRONMENTAL REQUIREMENTS - PART 6: TEST REQUIREMENTS FOR MEDICAL OPTICAL INSTRUMENTS |
DIN ISO 9022-21:2001-05 | OPTICS AND OPTICAL INSTRUMENTS - ENVIRONMENTAL TEST METHODS - PART 21: COMBINED LOW PRESSURE AND AMBIENT TEMPERATURE OR DRY HEAT |
DIN ISO 9022-3:2015-08 | Optics and photonics - Environmental test methods - Part 3: Mechanical stress (ISO 9022-3:2015) |
ISO 9022-6:2015 | Optics and photonics Environmental test methods Part 6: Dust |
DIN ISO 9022-15:2001-05 | OPTICS AND OPTICAL INSTRUMENTS - ENVIRONMENTAL TEST METHODS - PART 15: COMBINED DIGITALLY CONTROLLED BROAD-BAND RANDOM VIBRATION AND DRY HEAT OR COLD |
DIN ISO 9022-8:2015-08 | OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 8: HIGH INTERNAL PRESSURE, LOW INTERNAL PRESSURE, IMMERSION (ISO 9022-8:2015) |
DIN ISO 9022-18:2001-05 | OPTICS AND OPTICAL INSTRUMENTS - ENVIRONMENTAL TEST METHODS - PART 18: COMBINED DAMP HEAT AND LOW INTERNAL PRESSURE |
DIN ISO 9022-16:2001-05 | OPTICS AND OPTICAL INSTRUMENTS - ENVIRONMENTAL TEST METHODS - PART 16: COMBINED BOUNCE OR STEADY-STATE ACCELERATION AND DRY HEAT OR COLD |
DIN ISO 9022-17:2016-02 | OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 17: COMBINED CONTAMINATION, SOLAR RADIATION (ISO 9022-17:2015) |
DIN ISO 10109-1:2007-02 | OPTICS AND PHOTONICS - ENVIRONMENTAL REQUIREMENTS - PART 1: GENERAL OVERVIEW, TERMS AND DEFINITIONS, CLIMATIC ZONES AND THEIR PARAMETERS |
ISO 9022-17:2015 | Optics and photonics Environmental test methods Part 17: Combined contamination, solar radiation |
DIN ISO 9022-4:2015-06 | Optics and photonics - Environmental test methods - Part 4: Salt mist (ISO 9022-4:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.