DIN EN ISO 5529:2010-08
|
Wheat - Determination of the sedimentation index - Zeleny test (ISO 5529:2007); German version EN ISO 5529:2010
|
DIN 4226-1:2001-07
|
AGGREGATES FOR CONCRETE AND MORTAR - PART 1: NORMAL AND HEAVY-WEIGHT AGGREGATES
|
DIN EN ISO 787-7:2010-02
|
General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009)
|
DIN EN 16179:2012-11
|
Sludge, treated biowaste and soil - Guidance for sample pretreatment
|
DIN EN ISO 11337:2011-04
|
Plastics - Polyamides - Determination of -caprolactam and -laurolactam by gas chromatography (ISO 11337:2010)
|
DIN EN 13040:2008-01
|
Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
|
DIN EN 13892-3:2015-03
|
METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME
|
DIN EN ISO 20541:2008-12
|
MILK AND MILK PRODUCTS - DETERMINATION OF NITRATE CONTENT - METHOD BY ENZYMATIC REDUCTION AND MOLECULAR-ABSORPTION SPECTROMETRY AFTER GRIESS REACTION
|
DIN EN 12864:2006-03
|
LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
|
DIN EN 1429:2013-08
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING
|
DIN EN 1269:2016-02
|
TEXTILE FLOOR COVERINGS - ASSESSMENT OF IMPREGNATIONS IN NEEDLED FLOOR COVERINGS BY MEANS OF A SOILING TEST
|
DIN EN 15415-3:2012-06
|
Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
|
DIN ISO 20481:2011-01
|
Coffee and coffee products - Determination of the caffeine content using high performance liquid chromatography (HPLC) - Reference method (ISO 20481:2008)
|
DIN HDBK 133 : 5ED 2004
|
|
DIN ISO 11916-2:2014-11
|
SOIL QUALITY - DETERMINATION OF SELECTED EXPLOSIVES AND RELATED COMPOUNDS - PART 2: METHOD USING GAS CHROMATOGRAPHY (GC) WITH ELECTRON CAPTURE DETECTION (ECD) OR MASS SPECTROMETRIC DETECTION (MS) (ISO 11916-2:2013)
|
DIN EN 15428:2007-11
|
Soil improvers and growing media - Determination of particle size distribution
|
DIN ISO 11916-1:2014-11
|
SOIL QUALITY - DETERMINATION OF SELECTED EXPLOSIVES AND RELATED COMPOUNDS - PART 1: METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) WITH ULTRAVIOLET DETECTION (ISO 11916-1:2013)
|
DIN EN ISO 1927-3:2013-03
|
MONOLITHIC (UNSHAPED) REFRACTORY MATERIALS - PART 3: CHARACTERIZATION AS RECEIVED (ISO 1927-3:2012)
|
DIN EN 15415-1:2011-11
|
Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
|
DIN EN ISO 16282:2008-08
|
METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - DETERMINATION OF RESISTANCE TO ABRASION AT AMBIENT TEMPERATURE
|
DIN EN ISO 14232-1:2016-02 (Draft)
|
THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017)
|
DIN EN 12948:2011-02
|
Liming materials - Determination of size distribution by dry and wet sieving
|
DIN EN 13786:2010-07
|
AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
|
DIN EN 13785:2010-05
|
REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
|
DIN EN 15346:2015-01
|
PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
|
DIN EN ISO 6427:2014-08
|
PLASTICS - DETERMINATION OF MATTER EXTRACTABLE BY ORGANIC SOLVENTS (CONVENTIONAL METHODS) (ISO 6427:2013)
|
DIN EN ISO 8251:2011-05
|
ANODIZING OF ALUMINIUM AND ITS ALLOYS - MEASUREMENT OF ABRASION RESISTANCE OF ANODIC OXIDATION COATINGS
|
DIN EN 15348:2015-01
|
PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
|
DIN EN ISO 1927-1:2012-11
|
Monolithic (unshaped) refractory products - Part 1: Introduction and classification (ISO 1927-1:2012)
|
DIN EN 1067:2006-03
|
Adhesives - Examination and preparation of samples for testing
|
DIN EN 451-2:2015-07 (Draft)
|
METHOD OF TESTING FLY ASH - PART 2: DETERMINATION OF FINENESS BY WET SIEVING
|
DIN EN 451-1:2015-07 (Draft)
|
METHOD OF TESTING FLY ASH - PART 1: DETERMINATION OF FREE CALCIUM OXIDE CONTENT
|
DIN EN ISO 12677:2013-02
|
Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method (ISO 12677:2011)
|
DIN EN 1094-1:2008-09
|
INSULATING REFRACTORY PRODUCTS - PART 1: TERMINOLOGY, CLASSIFICATION AND METHODS OF TEST FOR HIGH TEMPERATURE INSULATION WOOL PRODUCTS
|
DIN EN 1431:2016-03 (Draft)
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION
|
DIN EN 50017 : 2000
|
ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - POWDER FILLING 'Q'
|
DIN EN 16129:2013-08
|
Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
|
DIN ISO 10844:2016-09
|
ACOUSTICS - SPECIFICATION OF TEST TRACKS FOR MEASURING NOISE EMITTED BY ROAD VEHICLES AND THEIR TYRES (ISO 10844:2014)
|
DIN ISO 9022-6:2015-08
|
OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 6: DUST (ISO 9022-6:2015)
|
DIN EN 15415-2:2012-06
|
Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
|
DIN EN ISO 20568-2:2015-07 (Draft)
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
|