DIN ISO 898-1:1989-01
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS AND STUDS
01-04-1992
12-01-2013
1 Geltungsbereich
2 Verweis auf andere Normen
3 Bezeichnungssystem
4 Ausgangswerkstoffe
5 Mechanische Eigenschaften
6 Prüfprogramme für die mechanischen Eigenschaften
7 Mindestbruchkräfte und Prüfkräfte
8 Prüfverfahren für die mechanischen Eigenschaften
9 Kennzeichnung
DevelopmentNote |
Jan89 version was a German edition of ISO 898 PT1 of 1988. Apr79 version partly superseded DIN 267(PT3) of Oct67.
|
DocumentType |
Standard
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
Standards | Relationship |
ISO 898-1:2013 | Similar to |
DIN 963:1990-08 | SLOTTED COUNTERSUNK (FLAT) HEAD SCREWS |
DIN 6616:1989-09 | HORIZONTAL STEEL TANKS, SINGLE- AND DOUBLE-WALLED, FOR THE ABOVE-GROUND STORAGE OF WATER-POLLUTING, INFLAMMABLE AND NON-INFLAMMABLE LIQUIDS |
DIN 1142:1982-01 | WIRE ROPE GRIPS FOR ROPE TERMINATIONS TO MEET SAFETY REQUIREMENTS |
DIN 6618-1:1989-09 | VERTICAL STEEL TANKS, SINGLE-WALLED FOR THE ABOVE-GROUND STORAGE OF WATER-POLLUTING, INFLAMMABLE AND NON-INFLAMMABLE LIQUIDS |
DIN 4626:1986-02 | CENTER BOLTS FOR LAMINATED LEAF SPRINGS |
DIN 964:1990-08 | SLOTTED RAISED COUNTERSUNK (OVAL) HEAD SCREWS |
DIN 7999:1983-12 | HIGH TENSILE STRENGTH HEXAGON FIT BOLTS WITH LARGE WIDTH ACROSS FLATS FOR STRUCTURAL BOLTING |
DIN 28125-3:1989-04 | HINGED COVERS - CIRCULAR SHAPE WITH PROTECTION RING AND SURFACE COATED - DN 500 AND DN 600 |
DIN 6922:1983-06 | HEXAGON FLANGE BOLTS WITH REDUCED SHANK |
DIN 966:1990-08 | CROSS RECESSED RAISED COUNTERSUNK HEAD SCREWS |
DIN 65152:1984-03 | AEROSPACE; LIFT FIXTURES; CONDITIONS FOR COMPUTATION AND ACCEPTANCE |
DIN 65149:1980-12 | AEROSPACE; SCREWS OF STEEL FOR NON-STRUCTURAL COMPONENTS, M3 AND M4, TECHNICAL SPECIFICATION |
DIN 7985:1990-08 | CROSS RECESSED RAISED CHEESE HEAD SCREWS |
DIN 85:1990-08 | SLOTTED PAN HEAD SCREWS; PRODUCT GRADE A |
DIN 25202:1992-04 | RAILWAY VEHICLES - SECURING OF BOLTED JOINTS - INITIAL STRESSING FORCES AND TIGHTENING TORQUES |
DIN 965:1990-08 | CROSS RECESSED COUNTERSUNK (FLAT) HEAD SCREWS |
DIN 28125-1:1989-08 | DN 150 TO DN 600 ROUND HINGED CLOSURES |
DIN 28125-2:1989-04 | HINGED COVERS - ELLIPTICAL, 350 MM X 450 MM |
DIN 71412:1987-11 | LUBRICATING NIPPLES - CONE TYPE |
DIN 28126:1989-04 | DN 125 BOW CLOSURES FOR PROCESS EQUIPMENT |
DIN 1052-2 : 1988 AMD 1 1996 | STRUCTURAL USE OF TIMBER - MECHANICALY FASTENED JOINTS |
DIN 15237:1980-01 | CONTINUOUS MECHANICAL HANDLING EQUIPMENT; SEATING SCREWS AND CUPPED WASHERS FOR THE ATTACHMENT OF COMPONENTS TO BELTS |
DIN 975:1986-09 | THREADED RODS |
DIN 7991:1986-01 | HEXAGON SOCKET COUNTERSUNK HEAD CAP SCREWS |
DIN 173-1:1992-11 | RENEWABLE JIG BUSHES - SLIP TYPE FORM K AND KL, FIXED TYPE FORM L - ACCESSORIES |
DIN 267-9:1979-08 | MECHANICAL FASTENERS - TECHNICAL CONDITIONS OF DELIVERY, COMPONENTS WITH ELECTROPLATED COATINGS |
DIN 3404:1988-01 | LUBRICATING NIPPLES - BUTTON HEAD |
DIN 4112 : 1983 AMD 1 2006 | TEMPORARY STRUCTURES; CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION |
DIN 84:1990-08 | SLOTTED CHEESE HEAD SCREWS; PRODUCT GRADE A |
DIN 3405:1986-05 | LUBRICATING NIPPLES CUPPED TYPE |
DIN 6914:1989-10 | HEXAGON BOLTS WITH LARGE WIDTHS ACROSS FLATS FOR HIGH TENSILE STRUCTURAL BOLTING |
DIN 173-2:1992-11 | RENEWABLE JIG BUSHES - FIXED RENEWABLE JIG BUSHES TYPE E, SLIP RENEWABLE JIG BUSHES TYPES ES AND ER - LINERS, LOCKING SCREWS - NOT FOR NEW DESIGNS |
DIN 8563-10:1984-12 | QUALITY ASSURANCE OF WELDED STRUCTURES; STUD WELDED JOINTS, STUD WELDING WITH DRAWN-ARC IGNITION AND RING IGNITION |
DIN 6624-1:1989-09 | Horizontal single-wall steel tanks with capacities between 1000 and 5000 litres, for the above ground storage of flammable and non-flammable water polluting liquids |
DIN 26020:1981-03 | TANK WAGONS - DOMES FOR MINERAL OIL TANK WAGONS - MOUNTING- AND CONNECTING DIMENSIONS - COMPONENT PARTS |
DIN 48801:1985-03 | LIGHTNING PROTECTION SYSTEMS; CONDUCTORS, SCREWS AND NUTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.