DIN 13-20:2000-08
|
ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 20: LIMITS OF SIZES FOR COARSE PITCH THREADS WITH THE PREFERRED TOLERANCE CLASSES - NOMINAL SIZES FROM 1 MM TO 68 MM |
DIN 258:2012-05
|
Taper pins with thread ends and constant taper lengths |
DIN 931-2:2009-06
|
Hexagon head bolts - Part 2: Metric thread M 68 to M 160 x 6 - Product grade B |
DIN 13-5:1999-11
|
ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm |
DIN ISO 261:1999-11
|
ISO general purpose metric screw threads - General plan (ISO 261:1998) |
DIN 13-25:2005-08
|
ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 182 mm to 250 mm |
DIN 13-3:1999-11
|
ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm |
DIN 6303:2006-08
|
Knurled nuts |
DIN ISO 68-1:1999-11
|
ISO general purpose screw threads - Basic profile - Part 1: Metric screw threads (ISO 68-1:1998) |
DIN 802-6:2003-07
|
TOLERANCES ON THE THREADED PORTION OF TAPS - PART 6: GROUND TAPS FOR TAPPED HOLES (EG) FOR WIRE THREAD INSERTS ACCORDING TO DIN 8140 FOR ISO METRIC COARSE AND FINE PITCH THREADS - MANUFACTURING TOLERANCES ON THE THREADED PORTION |
DIN ISO 262:1999-11
|
ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998) |
DIN 13-10:1999-11
|
ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm |
DIN ISO 6149-3:1996-11
|
CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
DIN 464:2007-01
|
Knurled thumb screws, high type |
DIN 935-3:2013-08
|
HEXAGON SLOTTED NUTS - PART 3: METRIC COARSE PITCH THREAD, PRODUCT GRADE C |
DIN 186:2010-09
|
T-head bolts with square neck |
DIN 466:2006-08
|
Knurled nuts with collar |
DIN ISO 6696:2016-07
|
Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989) |
DIN 5903-1:2011-01
|
Fish bolts - Part 1: With round head and oval neck |
DIN 478:2016-08
|
SQUARE HEAD BOLTS WITH COLLAR |
DIN EN ISO 6149-3:2007-05
|
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006) |
DIN EN ISO 3266:2016-05
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
DIN 7984:2009-06
|
Hexagon socket head cap screws with low head |
DIN 547:2006-08
|
Round nuts with drilled holes in one face |
DIN 3542:2013-10
|
CONNECTORS AND SOCKETS FOR BEVERAGE CONTAINERS - MATING DIMENSIONS |
DIN 13-8:1999-11
|
ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm |
DIN 13-1:1999-11
|
ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm |
DIN EN ISO 9873:2016-03 (Draft)
|
DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
DIN 261:2010-12
|
T-head bolts |
DIN HDBK 1 : 25ED 2014
|
|
DIN 797:2009-11
|
Special foundation bolts |
DIN 603:2016-10 (Draft)
|
CUP HEAD SQUARE NECK BOLTS |
DIN EN ISO 8675:2016-05 (Draft)
|
HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012) |
DIN EN ISO 898-1:2013-05
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
DIN EN ISO 8765:2011-06
|
Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
DIN EN ISO 8676:2011-07
|
Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
DIN EN ISO 8673:2016-05 (Draft)
|
HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012) |
DIN EN ISO 898-5:2012-09
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
DIN HDBK 1 E : 5ED 2014
|
MECHANICAL ENGINEERING - BASIC STANDARDS 1 |
VDI 3334:2015-03
|
Machining of internal threads |
DIN ISO 6149-2:1996-11
|
PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
DIN 479:2016-08
|
SQUARE HEAD BOLTS WITH SHORT DOG POINT |
DIN 444:2016-08 (Draft)
|
FASTENERS - EYE BOLTS |
DIN HDBK 45 : 11ED 2018
|
|
DIN 7992:2010-09
|
T-head bolts with large head |
DIN ISO 965-2:1999-11
|
ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 2: LIMITS OF SIZES FOR GENERAL PURPOSE EXTERNAL AND INTERNAL SCREW THREADS - MEDIUM QUALITY |
DIN 935-1:2013-08
|
HEXAGON SLOTTED AND CASTLE NUTS - PART 1: METRIC COARSE AND FINE PITCH THREAD, PRODUCT GRADES A AND B |
DIN ISO 8992:2005-09
|
Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
DIN HDBK 193 : 5ED 2011
|
|
DIN 3872:2012-02
|
NON-SOLDERING COMPRESSION COUPLINGS - UNION NUTS FOR BUTT JOINTS |
DIN 318:2015-10 (Draft)
|
FASTENERS - WING SCREWS - EDGED WINGS |
DIN ISO 6698:2015-03
|
CYCLES - SCREW THREADS USED TO ASSEMBLE FREEWHEELS ON BICYCLES HUBS (ISO 6698:1989) |
DIN ISO 1502:1996-12
|
ISO GENERAL PURPOSE METRIC SCREW THREADS - GAUGES AND GAUGING |
DIN 3859-1:2005-09
|
Compression couplings - Part 1: Technical delivery conditions |
DIN 13-22:2005-08
|
ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm |
DIN 13-23:2005-08
|
ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm |
DIN EN ISO 10683:2016-07 (Draft)
|
FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
DIN EN 3660-001:2016-04
|
AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION |
DIN EN ISO 15245-1:2013-11
|
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001 + Amd 1:2013) (includes Amendment A1:2013) |
DIN EN ISO 4034:2016-05 (Draft)
|
HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012) |
DIN EN ISO 8674:2016-05 (Draft)
|
HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012) |
DIN 34817:2001-04
|
WELD SCREWS WITH METRIC THREAD |
DIN 548:2007-01
|
Round nuts with set pin holes in side |
DIN 525:2009-11
|
Studs for welding |
DIN 13-6:1999-11
|
ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm |
DIN 7604:2016-05
|
HEXAGON HEAD SCREW PLUGS - LIGHT TYPE - CYLINDRICAL THREAD |
DIN 13-21:2005-08
|
ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 1 mm to 24,5 mm |
DIN HDBK 6-2 : 13ED 2009
|
GEWINDEBOHRER, GEWINDESCHNEIDEISEN UND GEWINDEFURCHER - NORMEN, WERKZEUGE |
DIN 13-51:2013-10
|
ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 51: EXTERNAL SCREW THREADS FOR TRANSITION FITS (FORMER: SCREW THREADS FOR INTERFERENCE FIT) - TOLERANCES, LIMIT DEVIATIONS, LIMITS OF SIZES |
DIN ISO 8488:2016-07
|
CYCLES - SCREW THREADS USED TO ASSEMBLE HEAD FITTINGS ON BICYCLE FORKS (ISO 8488:1986) |
DIN 908:2012-04
|
INTERNAL DRIVE SCREW PLUGS WITH COLLAR - CYLINDRICAL THREAD |
DIN 5903-2:2011-01
|
Fish bolts - Part 2: With square head |
DIN 8140-2:2005-08
|
WIRE THREAD INSERTS FOR ISO METRIC SCREW THREADS - PART 2: HELICAL COIL THREADS FOR INSERTS, THREAD TOLERANCES |
DIN 604:2016-10 (Draft)
|
FLAT COUNTERSUNK HEAD NIB BOLTS |
DIN 13-7:1999-11
|
ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 7: NOMINAL SIZES FOR 2 MM FINE PITCH THREADS - NOMINAL DIAMETER FROM 17 MM TO 300 MM |
DIN EN ISO 4032:2016-05 (Draft)
|
HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012) |
DIN EN 15048-1:2016-09
|
NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
DIN 13-52:1999-11
|
ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 52: MULTI-START THREAD TOLERANCES AND DEVIATION OF PROFILE |
DIN 316:2016-12
|
FASTENERS - WING SCREWS - ROUNDED WINGS |
DIN 13-19:1999-11
|
ISO general purpose metric screw threads - Part 19: Nominal profiles |
DIN 13-24:2005-08
|
ISO general purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 112 mm to 180 mm |
DIN 1587:2014-07
|
Hexagon domed cap nuts, high type |
DIN 467:2006-08
|
Short knurled nuts |
DIN 13-9:1999-11
|
ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm |
DIN 13-11:1999-11
|
ISO general purpose metric screw threads - Part 11: Nominal sizes for 8 mm fine pitch threads; nominal diameter from 130 mm to 1000 mm |
DIN 13-26:2005-08
|
ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm |
DIN ISO 68-1 E : 1999
|
ISO GENERAL PURPOSE SCREW THREADS - BASIC PROFILE - PART 1: METRIC SCREW THREADS |
DIN 13-52:2016-10 (Draft)
|
ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 52: MULTI-START THREAD TOLERANCES AND DEVIATION OF PROFILE |
DIN 1445:2011-02
|
Clevis pins with head and threaded portion |
DIN 202:1999-11
|
SCREW THREADS - GENERAL PLAN |
DIN EN 50018 : 2001 AMD 1 2003
|
ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
DIN 13-4:1999-11
|
ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm |
DIN 529:2010-09
|
Masonry and foundation bolts |
DIN EN ISO 10684:2011-09
|
Fasteners - Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008) |
DIN EN ISO 6149-2:2007-05
|
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006) |
DIN EN ISO 4033:2016-05 (Draft)
|
HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012) |