ISO 965-1:2013

Current

Current The latest, up-to-date edition.

ISO general purpose metric screw threads Tolerances Part 1: Principles and basic data

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English, French, Russian

Published date: 13-09-2013

Publisher: International Organization for Standardization

Abstract - (Show below) - (Hide below)

ISO 965-1:2013 specifies a tolerance system for ISO general purpose metric screw threads (M) conforming to ISO 261. The tolerance system refers to the basic profile according to ISO 68-1.

General Product Information - (Show below) - (Hide below)

Development Note	Supersedes NS 1874. (02/2007) Supersedes ISO/DIS 965-1. (09/2013)
Document Type	Standard
ISBN
Pages
Product Note	THIS STANDARD ALSO HAVE CORRECT VERSION FOR FR:2017
Published
Publisher	International Organization for Standardization
Status	Current
Supersedes	NS 1874 : 1ED 1983 ISO 965-1:1998 ISO 965-1:1998/Cor 1:2009

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
UNI ISO 965-1:2021	Identical
NF ISO 965-5/A1:2021	Identical
ONORM ISO 965-1 : 2016	Identical
NEN ISO 965-1 : 2013	Identical
SS-ISO 965-1:2015	Identical
IS 14962 : Part 1 : 2018	Identical
UNI ISO 965-1:2020	Identical
BS ISO 965-1:2013	Identical
NF ISO 965-1 : 2013	Identical
DIN ISO 965-1:2017-05	Identical
BIS IS 14962-1 : 2001 AMD 1 2013	Identical
SANS 1700-2-5 : 2ED 2003(R2010)	Identical
PN ISO 965-1 : 2001	Identical
DIN ISO 965-1:1999-11	Identical
DIN 13-15:1982-08	Similar to
UNE 17707:1978	Identical
BS ISO 965-1:2013 (published 2020-10)	Identical
DIN 13-14:1982-08	Similar to
NBN D 12 101 : 1988	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

ISO 17447-2:2015	Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs
04/30122631 DC : DRAFT SEP 2004	CEN/BT/TF 158 N12 - DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 9: CONNECTORS AND SOCKETS FOR BEVERAGE CONTAINERS, MATING DIMENSIONS
BS ISO 5781:2000	HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
16/30327473 DC : 0	BS ISO 2903 - ISO METRIC TRAPEZOIDAL SCREW THREADS - TOLERANCES
DIN EN 22857:1990-07	GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES; MANUFACTURING TOLERANCES ON THE THREADED PORTION
BS ISO 17447-1:2015	Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for metal-sheath-type glow-plugs
NF EN 3916 : 2009	AEROSPACE SERIES - INSERT, THIN WALL - SALVAGE PROCEDURE FOR COMPONENTS
DIN ISO 261:1999-11	ISO general purpose metric screw threads - General plan (ISO 261:1998)
BS ISO 6149-2:1993	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS
12/30261858 DC : 0	BS EN 60079-31/ED 2 - EXPLOSIVE ATMOSPHERES - PART 31: EQUIPMENT DUST IGNITION PROTECTION BY ENCLOSURE 'T'
BS 308-1.10(1996) : 1996	TECHNICAL DRAWINGS - SCREW THREADS AND THREADED PARTS - GENERAL CONVENTIONS
04/30102972 DC : DRAFT SEP 2004	BS ISO 19812 - ROAD VEHICLES - M10 X 1 COMPACT SPARK PLUGS WITH FLAT SEATING AND 16 MM HEXAGON AND THEIR CYLINDER HEAD HOUSING
16/30340613 DC : 0	BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS
BS ISO 14541:2013	HYDRAULIC FLUID POWER - DIMENSIONS AND REQUIREMENTS FOR SCREW-TO-CONNECT QUICK-ACTION COUPLINGS FOR GENERAL PURPOSE
I.S. EN 22857:1990	GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES - MANUFACTURING TOLERANCES ON THE THREADED PORTION
API 674 : 2010 : INC : ERR 1 : 2015 : R2016	POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
GOST R 52350.1 : 2005	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES "D"
02/103309 DC : DRAFT MAY 2002	BS EN 14455 - DEVICES TO PREVENT POLLUTION BY BLACKFLOW OF POTABLE WATER - PRESSURISED AIR INLET VALVES DN 15 TO DN 50 INCLUSIVE - FAMILY L, TYPE A AND TYPE B
DIN 802-6:2003-07	TOLERANCES ON THE THREADED PORTION OF TAPS - PART 6: GROUND TAPS FOR TAPPED HOLES (EG) FOR WIRE THREAD INSERTS ACCORDING TO DIN 8140 FOR ISO METRIC COARSE AND FINE PITCH THREADS - MANUFACTURING TOLERANCES ON THE THREADED PORTION
05/30135570 DC : DRAFT NOV 2005	ISO 2705 - ROAD VEHICLES - M12 X 1,25 SPARK PLUGS WITH FLAT SEATING AND THEIR CYLINDER HEAD HOUSINGS
DIN 13-10:1999-11	ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm
DIN ISO 6149-3:1996-11	CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
98/714983 DC : DRAFT SEP 1998	ISO/CD 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 4: EXTERNAL HEX AND INTERNAL HEX PORT PLUGS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
BS ISO 28741:2013	ROAD VEHICLES - SPARK-PLUGS AND THEIR CYLINDER HEAD HOUSINGS - BASIC CHARACTERISTICS AND DIMENSIONS
14/30304019 DC : 0	BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
BS ISO 3669:2017	VACUUM TECHNOLOGY - BAKABLE FLANGES - DIMENSIONS OF KNIFE-EDGE FLANGES
CSA C22.2 No. 60079.1 : 2016	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
BS ISO 2346:2001	ROAD VEHICLES - M14 X 1,25 COMPACT SPARK-PLUGS WITH FLAT SEATING AND 19 MM HEXAGON AND THEIR CYLINDER HEAD HOUSING
BS ISO 19812:2006	ROAD VEHICLES - M10 X 1 COMPACT SPARK-PLUGS WITH FLAT SEATING AND 16 MM HEXAGON AND THEIR CYLINDER HEAD HOUSINGS
06/30151815 DC : 0	BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS
BS ISO 22977:2005	ROAD VEHICLES - M12 X 1,25 SPARK-PLUGS WITH FLAT SEATING AND 14 MM BI-HEXAGON AND THEIR CYLINDER HEAD HOUSING
BIS IS 1363-3 : 2002	HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 3: HEXAGON NUTS (SIZE RANGE M 5 TO M 64)
MIL DTL 32546 : 0	CONNECTORS, ELECTRICAL, CIRCULAR, FOR HIGH-SPEED DATA BUS TRANSMISSION, COPPER CONDUCTOR, GENERAL SPECIFICATION FOR
BS EN 28733:1992	PARALLEL PINS WITH INTERNAL THREAD, UNHARDENED
13/30277311 DC : 0	BS ISO 17447-2 - ROAD VEHICLES - GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 2: BASIC CHARACTERISTICS AND DIMENSIONS FOR CERAMIC-SHEATH-TYPE GLOW-PLUGS
DIN ISO 6696:2016-07	Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989)
DIN 802-6 E : 2003	MANUFACTURING TOLERANCES ON THE THREADED PORTION OF SCREWING TAPS - PART 6: GROUND TAPS FOR TAPPED HOLES (EG) FOR WIRE THREAD INSERTS AS IN DIN 8140 FOR ISO METRIC COARSE AND FINE PITCH THREADS
03/303649 DC : DRAFT MAR 2003	ISO 6415 - INTERNAL COMBUSTION ENGINES - SPIN-ON FILTERS FOR LUBRICATING OIL - DIMENSIONS
I.S. EN 1515-4:2009	FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BS EN ISO 3266 : 2010	FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015)
CSA C22.2 No. 60079.0 : 2015	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BS 6293-2:1982	MJ THREADS FOR AEROSPACE CONSTRUCTION - SPECIFICATION FOR DIMENSIONS FOR BOLTS AND NUTS
BS 7432:1991	Specification for dental cartridge syringes
SAE AS 1338 : 2014	AEROSPACE METRIC 60 DEGREES SCREW THREAD PROFILE AND TOLERANCE CLASSES
PREN 4645-001 : 200P1	AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION
BIS IS 1363-1 : 2002	HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64)
PREN 6072 : 200P2	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING
PREN 4078 : 200P1	AEROSPACE SERIES - INSERTS, THREADED, THIN WALL, LOCKED AND SELF-LOCKING, IN HEAT RESISTING STEEL MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C
ISO 2344:1998	Road vehicles M14 x 1,25 spark-plugs with conical seating and their cylinder head housings
I.S. EN ISO 6149-1:2007	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
CSA B78.2 : 0	DIMENSIONING AND TOLERANCING OF TECHNICAL DRAWINGS
S.R. CEN TS 13001-3-5:2010	CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE OF FORGED HOOKS
ONORM EN ISO 15245-1 : 2013	GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001 + AMD 1:2013)
UNI EN ISO 8676 : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
BIS IS 4218-3 : 1999 AMD 1 2012	ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 3: BASIC DIMENSIONS
SAE J 1502 : 2013	CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC
BS EN ISO 10683:2014	FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
NF EN ISO 3266 : 2010 AMD 1 2016	FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES
BIS IS 1364-6 : 2002	HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 6: HEXAGON NUTS, STYLE 2
UNE-EN ISO 10683:2015	Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014)
ISO 14541:2013	Hydraulic fluid power Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
EN ISO 4042:1999	FASTENERS - ELECTROPLATED COATINGS (ISO 4042:1999)
EN 15048-1:2016	Non-preloaded structural bolting assemblies - Part 1: General requirements
BS EN ISO 4042:2000	FASTENERS - ELECTROPLATED COATINGS
ISO 9997:1999	Dental cartridge syringes
EN ISO 4016:2011	Hexagon head bolts - Product grade C (ISO 4016:2011)
I.S. EN 215:2004	THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS
EN ISO 4014:2011	Hexagon head bolts - Product grades A and B (ISO 4014:2011)
DIN EN 3237:1998-02	AEROSPACE SERIES - INSERTS, THIN WALL, SELF-LOCKING, LONG, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100 HT (INCONEL 718) - SILVER PLATED INTERNAL THREAD
UNE-EN ISO 4033:2013	Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012)
UNE-EN ISO 898-1:2015	Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
UNE-EN ISO 4014:2011	Hexagon head bolts - Product grades A and B (ISO 4014:2011)
BS EN ISO 4032:2012	Hexagon regular nuts (style 1). Product grades A and B
UNE-EN ISO 4032:2013	Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
ISO 8673:2012	Hexagon regular nuts (style 1) with metric fine pitch thread Product grades A and B
ISO 4016:2011	Hexagon head bolts Product grade C
BS EN 14367:2005	NON CONTROLLABLE BACKFLOW PREVENTER WITH DIFFERENT PRESSURE ZONES - FAMILY C, TYPE A
I.S. EN ISO 4034:2012	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012)
DIN EN 20898-2:1994-02	MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH COARSE PITCH THREAD AND SPECIFIED PROOF LOAD VALUES
I.S. EN ISO 4018:2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
I.S. EN 60423:2007	CONDUIT SYSTEMS FOR CABLE MANAGEMENT - OUTSIDE DIAMETERS OF CONDUITS FOR ELECTRICAL INSTALLATIONS AND THREADS FOR CONDUITS AND FITTINGS
DIN EN ISO 4017:2015-05	Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
EN ISO 4034:2012/AC:2013	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012/COR 1:2013)
EN 60423:2007	Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings
DIN EN 14367:2005-10	Non controllable backflow preventer with different pressure zones - Family C, type A
DIN EN ISO 10683:2001-02	FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
EN 60079-31:2014	Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
EN 50014:1997/A2:1999	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
DIN EN ISO 8434-1:2008-02	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
NF EN ISO 4018 : 2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
DD CEN/TS 13001-3-5:2010	Cranes. General design Limit states and proof of competence of forged hooks
DIN ISO 6149-2:1996-11	PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
DIN ISO 8488 E : 2016	CYCLES - SCREW THREADS USED TO ASSEMBLE HEAD FITTINGS ON BICYCLE FORKS (ISO 8488:1986)
BS ISO 6149-3:1993	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS
DIN ISO 6149-1:1996-11	CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH O-RING SEAL IN TRUNCATED HOUSING
DIN EN ISO 3266:2016-05	FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015)
11/30229160 DC : 0	BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS
ISO 17613-1:2006	Manually operated pumps for drinking water Selection and acceptance Part 1: Southeast Asia
BS A 358-1:2000	MJ THREADS - GENERAL REQUIREMENTS
DIN 13-5:1999-11	ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm
13/30285283 DC : 0	BS EN 13001-3-5 - CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATE AND PROOF OF COMPETENCE OF FORGED HOOKS
BS ISO 2705:2006	ROAD VEHICLES - M12 X 1,25 SPARK-PLUGS WITH FLAT SEATING AND THEIR CYLINDER HEAD HOUSINGS
ISO 4401:2005	Hydraulic fluid power — Four-port directional control valves — Mounting surfaces
DIN ISO 965-2:1999-11	ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 2: LIMITS OF SIZES FOR GENERAL PURPOSE EXTERNAL AND INTERNAL SCREW THREADS - MEDIUM QUALITY
16/30290140 DC : 0	BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
BS EN ISO 6149-1:2007	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
DIN 13-1:1999-11	ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm
DIN EN ISO 9873:2016-03 (Draft)	DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017)
ISO 17440:2014	Cranes General design Limit states and proof of competence of forged steel hooks
15/30328131 DC : 0	BS EN 3660-001 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
14/30287198 DC : 0	BS ISO 15171-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS FOR DIAGNOSTIC PURPOSES - PART 2: COUPLING FOR CONNECTION UNDER PRESSURE
BS ISO 13948-1:2015	DIESEL ENGINES - FUEL INJECTION PUMPS AND FUEL INJECTOR LOW-PRESSURE CONNECTIONS - PART 1: THREADED CONNECTIONS
BS ISO 2344:1998	ROAD VEHICLES - M14 X 1.25 SPARK PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSINGS
12/30236938 DC : 0	BS ISO 28741 - ROAD VEHICLES - SPARK-PLUGS AND THEIR CYLINDER HEAD HOUSINGS - BASIC CHARACTERISTICS AND DIMENSIONS
UNE-EN 60079-1:2015	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
UNI EN 1515-4 : 2010	FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BS ISO 965-5:1998	ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - LIMITS OF SIZES FOR INTERNAL SCREW THREADS TO MATE WITH HOT-DIP GALVANIZED EXTERNAL SCREW THREADS WITH MAXIMUM SIZE OF TOLERANCE POSITION H BEFORE GALVANIZING
BS ISO 261:1998	ISO GENERAL PURPOSE METRIC SCREW THREADS - GENERAL PLAN
ISO 8470:2006	Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
MIL C 38999 : J	CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET THREADED & BREECH COUPLING) ENVIRONMENT RESISTANT, REMOVABLE CRIMP & HERMETIC SOLDER CONTACTS
BS ISO 10959:2016	Aerospace. MJ threads. Gauging
BS ISO 15142-1:2003 (published 2003-08)	Implants for surgery. Metal intramedullary nailing systems Intramedullary nails
ABMA ISO 12240-4 : 1998	SPHERICAL PLAIN BEARINGS - PART 4: SPHERICAL PLAIN BEARING ROD ENDS
MIL DTL 38999 : M	CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED OR BREECH COUPLING), ENVIRONMENT RESISTANT WITH CRIMP REMOVABLE CONTACTS OR HERMETICALLY SEALED WITH FIXED, SOLDERABLE CONTACTS, GENERAL SPECIFICATION FOR
PREN 3660-001 : 200P3	AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
API 674 : 2010	POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
ISO 6415:2005	Internal combustion engines — Spin-on filters for lubricating oil — Dimensions
UNE-EN 60079-31:2016	Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
17/30350901 DC : 0	BS EN 215 - THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS
I.S. HD 60269-3-1:2004	LOW-VOLTAGE FUSES - PART 3-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - SECTIONS 1 TO 4: EXAMPLES OF TYPES OF STANDARDIZED FUSES
I.S. EN 15048-1:2016	NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
ISO 2704:1998	Road vehicles M10 x 1 spark-plugs with flat seating and their cylinder head housings
ISO 6149-1:2006	Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal
C22.1-15 PACKAGE	Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
ISO 9873:2017	Dentistry Intra-oral mirrors
IEC 60079-1 REDLINE : 7ED 2014	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
ISO 10303-214:2010	Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes
UNE-EN 15048-1:2018	Non-preloaded structural bolting assemblies - Part 1: General requirements
ISO 2705:2006	Road vehicles M12 x 1,25 spark-plugs with flat seating and their cylinder head housings
I.S. EN ISO 9873:2017	DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017)
ISO 8992:2005	Fasteners — General requirements for bolts, screws, studs and nuts
ASTM F 1941/F1941M : 2016 : REDLINE	Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
I.S. EN 3916:2008	AEROSPACE SERIES - INSERT, THIN WALL - SALVAGE PROCEDURE FOR COMPONENTS
UNI EN ISO 15245-1 : 2013	GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION
BS EN ISO 8434-1:2007	Metallic tube connections for fluid power and general use 24 degree cone connectors
EN ISO 4017:2014	Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
IEC 60079-1:2014 RLV	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
DIN EN ISO 8675:2016-05 (Draft)	HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012)
DIN EN ISO 898-1:2013-05	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
DIN EN ISO 8765:2011-06	Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
DIN EN ISO 8676:2011-07	Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
DIN EN ISO 8673:2016-05 (Draft)	HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012)
DIN EN ISO 898-5:2012-09	Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
BS EN 3044:1998	INSTALLATION HOLES FOR INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING - DESIGN STANDARD
UNE-EN ISO 4018:2011	Hexagon head screws - Product grade C (ISO 4018:2011)
ISO 965-2:1998	ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes for general purpose external and internal screw threads Medium quality
BS EN ISO 4033:2012	Hexagon high nuts (style 2). Product grades A and B
UNE-EN ISO 8673:2013	Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012)
BS EN 15048-1:2007	NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
09/30206527 DC : 0	BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BS EN ISO 4036:2012	Hexagon thin nuts unchamfered (style 0). Product grade B
BIS IS/IEC 60079-0 : 2011	EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
I.S. EN ISO 4032:2012	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012)
DIN EN ISO 6149-1:2007-05	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
I.S. EN ISO 8673:2012	HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012)
I.S. EN ISO 4036:2012	HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012)
I.S. EN ISO 8676:2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
I.S. EN ISO 8675:2012	HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012)
I.S. EN ISO 4033:2012	HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012)
I.S. EN ISO 4016:2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
I.S. EN ISO 898-1:2013	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
I.S. EN ISO 4017:2014	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
C22.1HB-18	Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I
I.S. EN ISO 8765:2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
I.S. EN ISO 8674:2012	HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012)
I.S. EN ISO 898-5:2012	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012)
I.S. EN ISO 4035:2012	HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B (ISO 4035:2012)
I.S. EN ISO 4014:2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
VDI 3334:2015-03	MACHINING OF INTERNAL THREADS
BS 88-3:2007	LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD OR SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
ONORM EN ISO 8676 : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ONORM EN ISO 4017 : 2015	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
NF EN ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
NF EN ISO 8676 : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ASME B1.21M : 1997 : R2008	METRIC SCREW THREADS - MJ PROFILE
NF EN ISO 8765 : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ONORM EN ISO 4016 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
BS 6293-2:1994	AEROSPACE - MJ THREADS - PART 2: LIMIT DIMENSIONS FOR BOLTS AND NUTS
ASME B1.21M : 1997	METRIC SCREW THREADS - MJ PROFILE
BS 6293-1:1994	AEROSPACE - MJ THREADS - GENERAL REQUIREMENTS
ASME B1.21M : 1997 : R2013	METRIC SCREW THREADS - MJ PROFILE
ONORM EN ISO 8765 : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
NF EN ISO 4016 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
ONORM EN ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
ONORM EN ISO 4018 : 2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
BS AU 262-3:1997	ROAD VEHICLES - SHEATH TYPE GLOW PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - M 10 GLOW PLUGS
DIN ISO 6698 E : 2015	CYCLES - SCREW THREADS USED TO ASSEMBLE FREEWHEELS ON BICYCLE HUBS (ISO 6698:1989)
BS ISO 1919:1998	ROAD VEHICLES - M14 X 1,25 SPARK PLUGS WITH FLAT SEATING AND THEIR CYLINDER HEAD HOUSINGS
ISO 7299-2:2009	Diesel engines End-mounting flanges for pumps Part 2: High-pressure supply pumps for common rail fuel injection systems
API 674 REDLINE : 2010	POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
BS 6293-3:1994	AEROSPACE - MJ THREADS - LIMIT DIMENSIONS FOR FITTINGS FOR FLUID SYSTEMS
14/30304022 DC : 0	BS ISO 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES
BS EN 60079-31:2014	Explosive atmospheres Equipment dust ignition protection by enclosure \'t\'
13/30277307 DC : 0	BS ISO 17447-1 - ROAD VEHICLES - GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 1: BASIC CHARACTERISTICS AND DIMENSIONS FOR METAL-SHEATH-TYPE GLOW-PLUGS
BS EN 6072:2010 (published 2010-09)	Aerospace series. Metallic materials. Test methods. Constant amplitude fatigue testing
14/30288036 DC : 0	BS ISO 13948-1 - DIESEL ENGINES - FUEL INJECTION PUMPS AND FUEL INJECTOR - PART 1: THREADED CONNECTIONS
I.S. EN ISO 898-6:1996	MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
BS EN 20898-6:1992	MECHANICAL PROPERTIES OF FASTENERS - NUTS WITH SPECIFIED PROOF LOAD VALUES. FINE PITCH THREAD
BS EN 4078:2009 (published 2010-01)	Aerospace series. Inserts, threaded, thin wall, locked and self-locking, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 315C
BS EN 50018:2000 (published 2006-01)	Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure \'d\'
10/30215350 DC : 0	BS ISO 16873 - HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES
ISO 6550-3:2013	Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 3: M10 glow-plugs
BS ISO 7299-2:2009	DIESEL ENGINES - END-MOUNTING FLANGES FOR PUMPS - PART 2: HIGH-PRESSURE SUPPLY PUMPS FOR COMMON RAIL FUEL INJECTION SYSTEMS
DIN ISO 8992:2005-09	Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
NF EN 22857 : 1990	GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES - MANUFACTURING TOLERANCES ON THE THREADED PORTION
MIL DTL 83538 : D	CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS FOR MIL-STD-1760 APPLICATIONS (METRIC), GENERAL SPECIFICATION FOR
04/30077768 DC : DRAFT FEB 2004	ISO 4401 - HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
04/30114086 DC : DRAFT JUL 2004	EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE)
04/30098930 DC : DRAFT FEB 2004	ISO 6550-4 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 4: M8 X 1 GLOW PLUGS (N983)
SAE USCAR 11-1 : 2007	DUPLICATE RECORD
BS ISO 7790:2013	HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS
04/30124527 DC : DRAFT OCT 2004	ISO/DIS 6149-3 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS
07/30155222 DC : 0	BS ISO 28741 - ROAD VEHICLES - SPARK-PLUGS AND THEIR CYLINDER HEAD HOUSINGS - BASIC CHARACTERISTICS AND DIMENSIONS
IEC 60269-3-1:2004	Low-voltage fuses - Part 3-1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Sections I to IV: Examples of types of standardized fuses
BS ISO 6263:2013	HYDRAULIC FLUID POWER - COMPENSATED FLOW-CONTROL VALVES - MOUNTING SURFACES
DIN EN ISO 8434-1 E : 2008	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
BS 7056(1989) : AMD 7497	SPECIFICATION FOR HARDENED PARALLEL PINS WITH INTERNAL THREAD
BS ISO 68-1:1998	ISO GENERAL PURPOSE SCREW THREADS - BASIC PROFILE - PART 1: METRIC SCREW THREADS
EN ISO 15245-1:2001/A1:2013	GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001/AMD 1:2013)
DIN ISO 6698:2015-03	CYCLES - SCREW THREADS USED TO ASSEMBLE FREEWHEELS ON BICYCLES HUBS (ISO 6698:1989)
BS A 358-3:2000	MJ THREADS - LIMIT DIMENSIONS FOR FITTINGS FOR FLUID SYSTEMS
BS ISO 12240-4:1998	SPHERICAL PLAIN BEARINGS - PART 4: SPHERICAL PLAIN BEARING ROD ENDS
DIN 802-5 E : 1997	TOLERANCES ON THE THREADED PORTION OF TAPE - PART 5: GROUND THREADED TAPS FOR ISO METRIC THREAD; THREADS FOR INTERFERENCE FITS ACCORDING TO DIN 8141-1, COARSE AND FINE PITCHES; MANUFACTURING TOLERANCES ON THE THREADED PORTION
EN 13001-3-5:2016	Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
02/711527 DC : DRAFT SEP 2002	ISO 10684 - FASTENERS - HOT DIP GALVANIZED COATINGS
BS ISO 17613-1:2006	MANUALLY OPERATED PUMPS FOR DRINKING WATER - SELECTION AND ACCEPTANCE - PART 1: SOUTHEAST ASIA
02/207221 DC : DRAFT JULY 2002	IEC 60079-1 ED.5 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES "D"
BS 5412&5413-1(1976) : AMD 4593	SPECIFICATION FOR THE PERFORMANCE OF DRAW OFF TAPS WITH METAL BODIES FOR WATER SERVICES - DIMENSIONAL AND DESIGN CHARACTERISTICS
BS ISO 17447-2:2015	ROAD VEHICLES - GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 2: BASIC CHARACTERISTICS AND DIMENSIONS FOR CERAMIC-SHEATH-TYPE GLOW-PLUGS
04/30123544 DC : DRAFT OCT 2004	IEC 60079-1 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES 'D'
BS ISO 965-4:1998	ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - LIMITS OF SIZES FOR HOT-DIP GALVANIZED EXTERNAL SCREW THREADS TO MATE WITH INTERNAL SCREW THREADS TAPPED WITH TOLERANCE POSITION H OR G AFTER GALVANIZING
BIS IS 10980-3 : 2014	AEROSPACE - MJ THREADS - PART 3: LIMIT DIMENSIONS FOR FITTINGS FOR FLUID SYSTEMS
BS 5412:1996	SPECIFICATION FOR LOW-RESISTANCE SINGLE TAPS AND COMBINATION TAP ASSEMBLIES (NOMINAL SIZE 1/2 AND 3/4) SUITABLE FOR OPERATION AT PN 10 MAX. AND A MINIMUM FLOW PRESSURE OF 0.01 MPa (0.1 BAR)
BIS IS 10980-1 : 2014	AEROSPACE - MJ THREADS - PART 1: GENERAL REQUIREMENTS
UNI EN ISO 10683 : 2014	FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS
BS EN 50014:1998	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
ISO 2347:1994	Road vehicles M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing
BS ISO 7368:2016	Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities
API 613:2003	SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
SAE USCAR 11 : 2007	TORQUE-TENSION TESTING AND EVALUATION OF FASTENER FINISHES
ISO 5855-2:1999	Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts
CSA E60079.0 : 2002	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS
ISO 12240-4:1998	Spherical plain bearings Part 4: Spherical plain bearing rod ends
BS EN 3660-001:2019	AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
I.S. EN 50018:2001	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D"
ISO 8434-1:2007	Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
I.S. EN 3914:2008	AEROSPACE SERIES - INSERT, THIN WALL, SELF-LOCKING, LONG, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (NI-P100HT, INCONEL 718), SILVER PLATED ON INTERNAL THREAD, FOR SALVAGE OF COMPONENTS
I.S. EN 4078:2009	AEROSPACE SERIES - INSERTS, THREADED, THIN WALL, LOCKED AND SELF-LOCKING, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C
ISO 15142-1:2003	Implants for surgery Metal intramedullary nailing systems Part 1: Intramedullary nails
ISO 6305-4:1985	Railway components — Technical delivery requirements — Part 4: Untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings
ISO 2345:1994	Road vehicles M18 x 1,5 spark-plugs with conical seating and their cylinder head housing
DIN EN ISO 4042:2001-01	FASTENERS - ELECTROPLATED COATINGS
UNI EN ISO 8434-1 : 2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
EN ISO 6149-1:2007	Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2007)
ISO 7368:2016	Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities
IEC 60852-5:1994	Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 5: Transformers and inductors using the series Q of C-cores
DIN EN ISO 10683:2016-07 (Draft)	FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
DIN EN ISO 8434-1:2016-10 (Draft)	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 13948-1:2015	Diesel engines Fuel injection pumps and fuel injector low-pressure connections Part 1: Threaded connections
ISO 5781:2016	Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces
ISO 261:1998	ISO general purpose metric screw threads General plan
I.S. CWA 14249:2003	REVISED FUNSTEP APPLICATION REFERENCE MODEL
EEMUA 186 : 2016	A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 3044:1998-07	AEROSPACE SERIES - INSTALLATION HOLES FOR INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING - DESIGN STANDARD
BS EN ISO 9997:2000	DENTAL CARTRIDGE SYRINGES
DIN EN 3660-001:2016-04	AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
UNE-EN ISO 4017:2015	Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
DIN EN ISO 8673 E : 2013	HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012)
DIN EN ISO 8765 E : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 8674 E : 2013	HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012)
UNE-EN ISO 4036:2013	Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012)
DIN EN ISO 4034:2016-05 (Draft)	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012)
DIN EN ISO 8674:2016-05 (Draft)	HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012)
BS EN ISO 8673:2012	Hexagon regular nuts (style 1) with metric fine pitch thread. Product grades A and B
ISO 4017:2014	Fasteners Hexagon head screws Product grades A and B
ISO 6410-1:1993	Technical drawings Screw threads and threaded parts Part 1: General conventions
UNE-EN ISO 4034:2013	Hexagon regular nuts (style 1) - Product grade C (ISO 4034:2012)
BS EN ISO 898-1:2013	Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
PD ISO/TR 11364:2012	GAS CYLINDERS - COMPILATION OF NATIONAL AND INTERNATIONAL VALVE STEM/GAS CYLINDER NECK THREADS AND THEIR IDENTIFICATION AND MARKING SYSTEM
BS EN ISO 6149-3:2007 (published 2007-03)	Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for light-duty (L series) stud ends
ISO 965-5:1998	ISO general purpose metric screw threads Tolerances Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
BS EN ISO 15245-1 : 2001	GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION
UNE-EN ISO 8674:2013	Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012)
BS EN ISO 4018:2011	Hexagon head screws. Product grade C
EN 4078:2009	Aerospace series - Inserts, threaded, thin wall, locked and self-locking, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C
EN ISO 6410-1:1996	Technical drawings - Screw threads and threaded parts - Part 1: General conventions (ISO 6410-1:1993)
EN 3916:2008	Aerospace series - Insert, thin wall - Salvage procedure for components
EN ISO 6149-3:2007	Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
UNI EN ISO 4036 : 2013	HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B
UNI EN ISO 8765 : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
UNI EN ISO 4033 : 2013	HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B
UNI EN ISO 4016 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
UNI EN ISO 4017 : 2014	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B
UNI EN ISO 4034 : 2013	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C
UNI EN ISO 4035 : 2013	HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B
UNI EN ISO 8673 : 2013	HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
UNI EN ISO 898-1 : 2013	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
UNI EN ISO 4032 : 2013	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B
UNI EN ISO 8674 : 2013	HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
UNI EN ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
BS 3643-1:1981	ISO METRIC SCREW THREADS - PRINCIPLES AND BASIC DATA
UNI EN ISO 898-5 : 2012	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD
UNI EN ISO 4018 : 2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
UNI EN ISO 8675 : 2013	Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B
CSA C22.2 No. 60079.1 : 2016	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
CSA CE CODE SAFETY PACKAGE : 2012	CE CODE SAFETY PACKAGE
ISO 6263:2013	Hydraulic fluid power Compensated flow-control valves Mounting surfaces
ISO/TS 3669-2:2007	Vacuum technology Bakable flanges Part 2: Dimensions of knife-edge flanges
I.S. EN ISO 8434-1:2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
DIN 13-6:1999-11	ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm
16/30302544 DC : 0	BS EN ISO 9873 - DENTISTRY - INTRA-ORAL MIRRORS
C22.10-10	Québec Construction Code, Chapter V - Electricity Canadian Electrical Code, Part I (Twenty-first Edition) with Québec Amendments
NF EN 3914 : 2008	AEROSPACE SERIES - INSERT, THIN WALL, SELF-LOCKING, LONG, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (NI-P100HT, INCONEL 718), SILVER PLATED ON INTERNAL THREAD, FOR SALVAGE OF COMPONENTS
BS ISO 16246:2005	ROAD VEHICLES - M12 X 1,25 SPARK-PLUGS WITH FLAT SEATING AND 14 MM HEXAGON AND THEIR CYLINDER HEAD HOUSING
DIN EN 50014 : 2000	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
BS A 358-2:2000	MJ THREADS - LIMIT DIMENSIONS FOR BOLTS AND NUTS
BS ISO 2903:2016	ISO METRIC TRAPEZOIDAL SCREW THREADS - TOLERANCES
NFC 61 203 : 2005	LOW-VOLTAGE FUSES - PART 3-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - SECTIONS I TO IV: EXAMPLES OF TYPES OF STANDARDIZED FUSES
BS 7556:1992	THERMOSTATIC RADIATOR VALVES - SPECIFICATION FOR DIMENSIONS AND DETAILS ON CONNECTION
BS ISO 6149-1:1993	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
BS ISO 965-3:1998	ISO general purpose metric screw threads. Tolerances Deviations for constructional screw threads
DIN ISO 4042:1992-06	THREADED COMPONENTS - ELECTROPLATED COATINGS
04/30124525 DC : DRAFT OCT 2004	ISO/DIS 6149-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS
ISO 5855-1:1999	Aerospace MJ threads Part 1: General requirements
96/709929 DC : DRAFT JUL 1996	ISO/CD 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVATIES
DIN ISO 262:1999-11	ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998)
BS 5412-1(1976) : 1976	SPECIFICATION FOR THE PERFORMANCE OF DRAW OFF TAPS WITH METAL BODIES FOR WATER SERVICES - DIMENSIONAL AND DESIGN CHARACTERISTICS
12/30252148 DC : 0	BS ISO 17440 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS
BS ISO 6550-3:2013	ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 3: M10 GLOW-PLUGS
BS EN 60079-0 : 2012	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BS EN 1515-4:2009	Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
BS HD 60269-3 : 2010	LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
DIN ISO 8488:2016-07	CYCLES - SCREW THREADS USED TO ASSEMBLE HEAD FITTINGS ON BICYCLE FORKS (ISO 8488:1986)
BS EN 4645-001:2010 (published 2010-02)	Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder Technical specification
13/30287034 DC : 0	BS EN 3660-001 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
BS EN 3914:2008 (published 2008-07)	Aerospace series. Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components
BS ISO 6264:1998	HYDRAULIC FLUID POWER - PRESSURE-RELIEF VALVES - MOUNTING SURFACES
BS ISO 17440:2014	CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS
DIN 13-27:1983-12	ISO METRIC SCREW THREADS - COARSE AND FINE SCREW THREADS FROM 1 TO 355 MM SCREW THREAD DIAMETER - DEVIATIONS
03/300201 DC : DRAFT FEB 2003	IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
CEI EN 60423 : 2008	CONDUIT SYSTEMS FOR CABLE MANAGEMENT - OUTSIDE DIAMETERS OF CONDUITS FOR ELECTRICAL INSTALLATIONS AND THREADS FOR CONDUITS AND FITTINGS
XP PREN 3660-001 : 1994 XP	AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
08/30152628 DC : DRAFT SEP 2008	BS ISO 6550-4 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 4: M8 X 1 GLOW-PLUGS
05/30135654 DC : DRAFT JUN 2005	IEC 60269-3 ED 3 - LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD OR SIMILAR APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
11/30232174 DC : DRAFT AUG 2011	BS ISO 6550-3 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 3: M10 GLOW-PLUGS
BS EN ISO 9873:2017	DENTISTRY - INTRA-ORAL MIRRORS
API 674 : 2010(R2016)	POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
BS ISO 262:1998	ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts
NF EN 4078 : 2010	AEROSPACE SERIES - INSERTS, THREADED, THIN WALL, LOCKED AND SELF-LOCKING, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C
BIS IS/IEC 60079-1 : 2007	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
IEC 60852-3:1992	Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 3: Transformers and inductors using YUI-1 laminations
ISO 2346:2001	Road vehicles M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing
I.S. EN ISO 15245-1:2002	GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001)
IS 1367 : Part 3 : 2017	TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS
DIN EN 1515-4 E : 2010	FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
PREN 3913 : 200P1	AEROSPACE SERIES - INSERT, THIN WALL, SELF-LOCKING, SHORT, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (NI-P100HT, INCONEL 718), SILVER PLATED ON INTERNAL THREAD, FOR SALVAGE OF COMPONENTS
PREN 3916 : 200P1	AEROSPACE SERIES - INSERT, THIN WALL - SALVAGE PROCEDURE FOR COMPONENTS
CSA C22.2 No. 60079-31 : 2015	EXPLOSIVE ATMOSPHERES - PART 31: EQUIPMENT DUST IGNITION PROTECTION BY ENCLOSURE 'T'
API 674 : 2010 : ERR 1 : 2014	POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
ISO 17447-1:2015	Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs
BS EN 3660-001:2016	AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
ISO 15171-2:2016	Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 2: Coupling with M16 x 2 end for connection under pressure
I.S. EN ISO 4042:1999	FASTENERS - ELECTROPLATED COATINGS
I.S. EN ISO 3266:2010	FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010)
ISO 4042:1999	Fasteners Electroplated coatings
XP CEN/TS 13001-3-5 : 2010 XP	CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE FOR FORGED HOOKS
ISO 3669:2017	Vacuum technology Bakeable flanges Dimensions of knife-edge flanges
DIN EN ISO 9873 E : 2000	DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017)
EN ISO 10683:2014	Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014)
I.S. EN 3660-001:2016	AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
DIN 13-7:1999-11	ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 7: NOMINAL SIZES FOR 2 MM FINE PITCH THREADS - NOMINAL DIAMETER FROM 17 MM TO 300 MM
BS ISO 6550-4:2014	ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 4: M8 X 1 GLOW-PLUGS
CEI 32-13 : 2013	LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
SAE USCAR 10-2 : 2007	DUPLICATE RECORD
ISO 19812:2006	Road vehicles M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
I.S. EN 4645-001:2010	AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION
ISO 16246:2005	Road vehicles M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing
ISO 68-1:1998	ISO general purpose screw threads Basic profile Part 1: Metric screw threads
ISO 10959:2016	Aerospace MJ threads Gauging
EN ISO 8434-1:2007/AC:2009	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 7790:2013	Hydraulic fluid power Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 Clamping dimensions
ISO 5855-3:1999	Aerospace MJ threads Part 3: Limit dimensions for fittings for fluid systems
IEC 60269-3:2010+AMD1:2013+AMD2:2019 CSV	Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
ISO 16873:2011	Hydraulic fluid power — Pressure switches — Mounting surfaces
ISO 6550-4:2014	Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 4: M8 x 1 glow-plugs
DIN EN ISO 4032:2016-05 (Draft)	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012)
EN ISO 9997:1999	Dental cartridge syringes (ISO 9997:1999)
I.S. EN ISO 9997:2000	DENTAL CARTRIDGE SYRINGES
DIN EN 215:2007-11	THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS
DIN EN 15048-1:2016-09	NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 8676 E : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 8675 E : 2013	HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012)
BS EN ISO 13691:2002	Petroleum and natural gas industries. High-speed special-purpose gear units
BS EN 74-1:2005	Couplers, spigot pins and baseplates for use in falsework and scaffolds Part 1: Couplers for tubes - Requirements and test procedures
BS EN ISO 10684:2004	FASTENERS - HOT DIP GALVANIZED COATINGS
BS EN ISO 4014:2011	Hexagon head bolts. Product grades A and B
UNE-EN ISO 4035:2013	Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)
ISO 4035:2012	Hexagon thin nuts chamfered (style 0) Product grades A and B
ISO 2857:1973	Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion
ISO 4033:2012	Hexagon high nuts (style 2) Product grades A and B
BS EN 215:2004	THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS
IEC 60079-0:2017 RLV	Explosive atmospheres - Part 0: Equipment - General requirements
ISO 965-3:1998	ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads
BS EN ISO 4035:2012	Hexagon thin nuts chamfered (style 0). Product grades A and B
ISO 3266:2010	Forged steel eyebolts grade 4 for general lifting purposes
BS EN ISO 8676:2011	Hexagon head screws with metric fine pitch thread. Product grades A and B
ISO 898-1:2013	Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
BS EN ISO 4016:2011	Hexagon head bolts. Product grade C
UNE-EN 60079-0:2013	Explosive atmospheres - Part 0: Equipment - General requirements
ISO 4034:2012	Hexagon regular nuts (style 1) Product grade C
BS EN 20898-2:1994	Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread
ISO 2903:2016	ISO metric trapezoidal screw threads Tolerances
UNE-EN ISO 8675:2013	Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012)
BS EN ISO 8674:2012	Hexagon high nuts (style 2) with metric fine pitch thread. Product grades A and B
UNE-EN 1515-4:2010	Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
ISO 898-5:2012	Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread
IEC 60423:2007	Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings
ISO 8676:2011	Hexagon head screws with metric fine pitch thread Product grades A and B
ISO/TR 11364:2012	Gas cylinders Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system
ISO 4014:2011	Hexagon head bolts Product grades A and B
ISO 10684:2004	Fasteners Hot dip galvanized coatings
IEC 60079-31:2013	Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
ISO 898-6:1994	Mechanical properties of fasteners Part 6: Nuts with specified proof load values Fine pitch thread
ISO 4032:2012	Hexagon regular nuts (style 1) Product grades A and B
ISO 4036:2012	Hexagon thin nuts unchamfered (style 0) Product grade B
ISO 13691:2001	Petroleum and natural gas industries — High-speed special-purpose gear units
UNE-EN ISO 8765:2011	Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
ISO 15245-1:2001	Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification
ISO 965-4:1998	ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
BS EN ISO 4017:2014	Fasteners. Hexagon head screws. Product grades A and B
BS EN 60423:1995	CONDUIT SYSTEMS FOR CABLE MANAGEMENT - OUTSIDE DIAMETERS OF CONDUITS FOR ELECTRICAL INSTALLATIONS AND THREADS FOR CONDUITS AND FITTINGS
05/30134569 DC : DRAFT JUN 2005	IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
ISO 8674:2012	Hexagon high nuts (style 2) with metric fine pitch thread Product grades A and B
ISO 6149-2:2006	Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
BS EN 3913:2007	AEROSPACE SERIES - INSERT, THIN WALL, SELF-LOCKING, SHORT, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (NI-P100HT, INCONEL 718), SILVER PLATED ON INTERNAL THREAD, FOR SALVAGE OF COMPONENTS
ISO 8675:2012	Hexagon thin nuts chamfered (style 0) with metric fine pitch thread Product grades A and B
UNE-EN ISO 898-5:2013	Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
UNE-EN ISO 8676:2011	Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
ISO 4018:2011	Hexagon head screws Product grade C
ISO 8765:2011	Hexagon head bolts with metric fine pitch thread Product grades A and B
UNE-EN ISO 9873:2017	Dentistry - Intra-oral mirrors (ISO 9873:2017)
ISO 6149-3:2006	Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
BS EN ISO 8765:2011	Hexagon head bolts with metric fine pitch thread. Product grades A and B
EN 1515-4:2009	Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN 20898-6 : 1992	MECHANICAL PROPERTIES OF FASTENERS - NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
EN 3913:2007	Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for salvage of components
EN ISO 6149-2:2007	Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2007)
EN ISO 898-1:2013	Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
EN ISO 4035:2012	Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)
EN ISO 10684:2004/AC:2009	Fasteners - Hot dip galvanized coatings (ISO 10684:2004/Cor 1:2008)
EN 28733 : 1992	PARALLEL PINS WITH INTERNAL THREAD, UNHARDENED
EN ISO 13691:2002	Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001)
EN 28736 : 1992	TAPER PINS WITH INTERNAL THREAD, UNHARDENED (ISO 8736:1986)
EN 6072:2010	Aerospace series - Metallic materials - Test methods - Constant amplitude fatigue testing
EN ISO 4018:2011	Hexagon head screws - Product grade C (ISO 4018:2011)
EN ISO 8676:2011	Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
EN ISO 8765:2011	Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
EN 20898-2 : 1993	MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992)
EN ISO 4032:2012	Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
EN ISO 4033:2012	Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012)
EN 4645-001:2010	Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification
EN ISO 8673:2012	Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012)
EN ISO 3266:2010/A1:2015	FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015)
EN 3237 : 1998	AEROSPACE SERIES - INSERTS, THIN WALL, SELF-LOCKING, LONG, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED INTERNAL THREAD
EN 3660-001:2016	Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
EN 3044 : 1998	AEROSPACE SERIES - INSTALLATION HOLES FOR INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING - DESIGN STANDARD
EN 215 : 2004 AMD 1 2006	THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS
EN 3236 : 1998	AEROSPACE SERIES - INSERTS, THIN WALL, SELF-LOCKING, SHORT, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED INTERNAL THREAD
EN 3914:2008	Aerospace series - Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components
EN ISO 8674:2012	Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012)
EN 74-1:2005	Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
EN 14367:2005	Non controllable backflow preventer with different pressure zones - Family C, type A
EN ISO 898-5:2012	Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
EN ISO 898-6 : 1995	MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
EN ISO 8675:2012	Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012)
EN 22857:1989	Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion (ISO 2857:1973 + A1:1984 +A2:1986)
EN 24766 : 1992	SLOTTED SET SCREWS WITH FLAT POINT
EN ISO 4036:2012	Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012)
IS 1367 : Part 1 : 2014	TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS
DIN ISO 6696 E : 2016	CYCLES - SCREW THREADS USED IN BOTTOM BRACKET ASSEMBLIES (ISO 6696:1989)
FM 3615 : 2018	EXPLOSIONPROOF ELECTRICAL EQUIPMENT GENERAL REQUIREMENTS
11/30239331 DC : 0	BS ISO 14541 - HYDRAULIC FLUID POWER - DIMENSIONS AND REQUIREMENTS FOR SCREW-TO-CONNECT TYPE QUICK-ACTION COUPLINGS FOR GENERAL PURPOSE
BS ISO 8470:2006	ROAD VEHICLES - M14 X 1,25 SPARK-PLUGS WITH FLAT SEATING AND 16 MM HEXAGON AND THEIR CYLINDER HEAD HOUSINGS
11/30237803 DC : 0	BS ISO 7790 - HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS
ONORM EN 215 : 2006	THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS
BS ISO 965-2:1998	ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - LIMITS OF SIZES FOR GENERAL PURPOSE EXTERNAL AND INTERNAL SCREW THREADS - MEDIUM QUALITY
HD 60269-3-1:2004	Low-voltage fuses - Part 3-1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Sections I to IV: Examples of types of standardized fuses
BS ISO 15171-2:2016	CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS FOR DIAGNOSTIC PURPOSES - PART 2: COUPLING WITH M16 X 2 END FOR CONNECTION UNDER PRESSURE
DD ISO/TS 3669-2:2007	VACUUM TECHNOLOGY - BAKABLE FLANGES - PART 2: DIMENSIONS OF KNIFE-EDGE FLANGES
DIN 13-9:1999-11	ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm
BS ISO 6415:2005	Internal combustion engines. Spin-on filters for lubricating oil. Dimensions
BS ISO 16873:2011	Hydraulic fluid power. Pressure switches. Mounting surfaces
BS 5983-5:1982	METRIC SPHERICAL PLAIN BEARINGS - SPECIFICATION FOR DIMENSIONS AND TOLERANCES OF SPHERICAL PLAIN BEARING ROD ENDS DIMENSION SERIES E AND JK
BS 88-3(2010) : 2010 COR 2014	LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
I.S. EN 6072:2010	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING
DIN 13-52:2016-10 (Draft)	ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 52: MULTI-START THREAD TOLERANCES AND DEVIATION OF PROFILE
DIN EN 1515-4:2010-04	Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
06/30029245 DC : 0	EN 3660-062 - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 062: CABLE OUTLET, STYLE K, 90 DEGREE, FOR HEAT SHRINKABLE BOOT SHIELDED, SEALED, SELF LOCKING - PRODUCT STANDARD
DIN 202:1999-11	SCREW THREADS - GENERAL PLAN
13/30274174 DC : 0	BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES
04/30124528 DC : DRAFT OCT 2004	ISO/DIS 6149-1 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
BS ISO 2704:1998	ROAD VEHICLES - M10 X 1 SPARK PLUGS WITH FLAT SEATING AND THEIR CYLINDER HEAD HOUSINGS
11/30247086 DC : 0	BS EN 60079-1 ED. 7.0 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D"
BS EN 13001-3-5:2016	CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED HOOKS
SAE AS 29600 : 2017	CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS ASSOCIATED HARDWARE, GENERAL SPECIFICATION FOR
ONORM EN ISO 8434-1 : 2009	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
BS ISO 8992:2005	Fasteners. General requirements for bolts, screws, studs and nuts
CSA B356 : 2000 : R2005	WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS
CSA B356 : 2000 : R2010	WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS
BS ISO 4401:2005	Hydraulic fluid power. Four-port directional control valves. Mounting surfaces
06/30148355 DC : DRAFT MAR 2006
07/30139822 DC : 0
01/203905 DC : DRAFT MAY 2001	PRHD 630.3.1 S3 - LOW VOLTAGE FUSES - PART 3-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - SECTIONS 1 TO 4
BS EN 3916:2008 (published 2008-09)	Aerospace series. Insert, thin wall. Salvage procedure for components
BS ISO 5483:2003	Ships and marine technology. Drain facilities from oil and water tanks
03/313530 DC : DRAFT AUG 2003	ISO 16246 - ROAD VEHICLES - M12 X 1.25 SPARK-PLUGS WITH FLAT SEATING AND 14 MM HEXAGON AND THEIR CYLINDER HEAD HOUSING
DIN EN 50018 : 2001 AMD 1 2003	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D"
CSA B356 : 2000	WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS
BIS IS/IEC 60079-31 : 2008	EXPLOSIVE ATMOSPHERES - PART 31: EQUIPMENT DUST IGNITION PROTECTION BY ENCLOSURE "T"
API 674 : 2010 : ERR 2 : 2015	POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
PREN 3914 : 200P1	AEROSPACE SERIES - INSERT, THIN WALL, SELF-LOCKING, LONG, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (NI-P100HT, INCONEL 718), SILVER PLATED ON INTERNAL THREAD, FOR SALVAGE OF COMPONENTS
I.S. EN 60079-1:2014	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
I.S. 231:1979	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
ISO 22977:2005	Road vehicles M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing
I.S. HD 60269-3:2010	LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F (IEC 60269-3:2010 (MOD))
SAE USCAR 10 : 2007	TEST FOR EVALUATING THE TORQUE-TENSION RELATIONSHIP OF BOTH EXTERNAL AND INTERNAL METRIC THREADED FASTENERS
ISO 28741:2013	Road vehicles Spark-plugs and their cylinder head housings Basic characteristics and dimensions
BIS IS 2148 : 2004 AMD 2 2008	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - FLAMEPROOF ENCLOSURES "D"
IEC 60079-0:2017	Explosive atmospheres - Part 0: Equipment - General requirements
I.S. EN 60079-31:2014	EXPLOSIVE ATMOSPHERES - PART 31: EQUIPMENT DUST IGNITION PROTECTION BY ENCLOSURE 'T'
EN ISO 9873:2017	Dentistry - Intra-oral mirrors (ISO 9873:2017)
I.S. EN ISO 10683:2014	FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
ISO 5483:2003	Ships and marine technology Drain facilities from oil and water tanks
ISO 10683:2014	Fasteners Non-electrolytically applied zinc flake coatings
I.S. EN 60079-0:2012	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
IEC 60269-3:2010+AMD1:2013 CSV	Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
IEC 60079-0 REDLINE : 7.0	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
ISO 262:1998	ISO general purpose metric screw threads Selected sizes for screws, bolts and nuts
DIN EN ISO 6149-3:2007-05	Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
DIN EN ISO 10684:2011-09	Fasteners - Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008)
DIN EN 14367 E : 2005	NON CONTROLLABLE BACKFLOW PREVENTER WITH DIFFERENT PRESSURE ZONES - FAMILY C, TYPE A
DIN EN 3236:1998-02	AEROSPACE SERIES - INSERTS, THIN WALL, SELF-LOCKING, SHORT, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - SILVER PLATED INTERNAL THREAD
DIN EN ISO 6149-2:2007-05	Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)
DIN EN ISO 4033:2016-05 (Draft)	HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012)
BS ISO 13691 : 2001 AMD 14307	PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS
C22.1-18	Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations
BS EN ISO 4034:2012	Hexagon regular nuts (style 1). Product grade C
BS EN 24766:1992	SLOTTED SET SCREWS WITH FLAT POINT
UNE-EN ISO 4016:2011	Hexagon head bolts - Product grade C (ISO 4016:2011)
BS EN 3236:1998	INSERTS, THIN WALL, SELF-LOCKING, SHORT, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED INTERNAL THREAD
13/30286778 DC : 0	BS EN 60079-1 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
BS EN 28736:1992	TAPER PINS WITH INTERNAL THREAD, UNHARDENED
BS EN ISO 6149-2:2007 (published 2007-03)	Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
BS EN ISO 8675:2012	Hexagon thin nuts chamfered (style 0) with metric fine pitch thread. Product grades A and B
BS EN 3237:1998	INSERTS, THIN WALL, SELF-LOCKING, LONG, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED INTERNAL THREAD
BS EN ISO 6410-1:1996	Technical drawings. Screw threads and threaded parts General conventions
BS EN ISO 898-5:2012	Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread
EN 60079-0:2012/A11:2013	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
DIN EN ISO 4016:2011-06	Hexagon head bolts - Product grade C (ISO 4016:2011)
CEN/TS 13001-3-5:2010	Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
DIN EN ISO 9873:2000-07	DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017)
HD 630.3.1 S3:2002	LOW-VOLTAGE FUSES - PART 3-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - SECTIONS 1 TO 4
DIN ISO 965-5:2002-05	ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 5: LIMITS OF SIZES FOR INTERNAL SCREW THREADS TO MATE WITH HOT-DIP GALVANIZED EXTERNAL SCREW THREADS WITH MAXIMUM SIZE OF TOLERANCE POSITION H BEFORE GALVANIZING
HD 60269-3:2010/A1:2013	LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
EN 50018 : 2000 AMD 1 2002	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D"
EN 60079-1:2014	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
DIN EN ISO 4036:2013-04	HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012)
DIN EN ISO 898-6:1996-02	MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
DIN EN ISO 4014:2011-06	Hexagon head bolts - Product grades A and B (ISO 4014:2011)
DIN ISO 965-4:2002-05	ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 4: LIMITS OF SIZES FOR HOT-DIP GALVANIZED EXTERNAL SCREW THREADS TO MATE WITH INTERNAL SCREW THREADS TAPPED WITH TOLERANCE POSITION H OR G AFTER GALVANIZING
DIN EN ISO 4018:2011-07	Hexagon head screws - Product grade C (ISO 4018:2011)

Standards Referencing This Book - (Show below) - (Hide below)

ISO 5408:2009	Screw threads Vocabulary
ISO 1502:1996	ISO general-purpose metric screw threads Gauges and gauging
ISO 68-1:1998	ISO general purpose screw threads Basic profile Part 1: Metric screw threads
ISO 261:1998	ISO general purpose metric screw threads General plan
ISO 898-1:2013	Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account

Abstract - (Show below) - (Hide below)

ISO 965-1:2013 specifies a tolerance system for ISO general purpose metric screw threads (M) conforming to ISO 261. The tolerance system refers to the basic profile according to ISO 68-1.

General Product Information - (Show below) - (Hide below)

Development Note	Supersedes NS 1874. (02/2007) Supersedes ISO/DIS 965-1. (09/2013)
Document Type	Standard
ISBN
Pages
Product Note	THIS STANDARD ALSO HAVE CORRECT VERSION FOR FR:2017
Published
Publisher	International Organization for Standardization
Status	Current
Supersedes	NS 1874 : 1ED 1983 ISO 965-1:1998 ISO 965-1:1998/Cor 1:2009

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
UNI ISO 965-1:2021	Identical
NF ISO 965-5/A1:2021	Identical
ONORM ISO 965-1 : 2016	Identical
NEN ISO 965-1 : 2013	Identical
SS-ISO 965-1:2015	Identical
IS 14962 : Part 1 : 2018	Identical
UNI ISO 965-1:2020	Identical
BS ISO 965-1:2013	Identical
NF ISO 965-1 : 2013	Identical
DIN ISO 965-1:2017-05	Identical
BIS IS 14962-1 : 2001 AMD 1 2013	Identical
SANS 1700-2-5 : 2ED 2003(R2010)	Identical
PN ISO 965-1 : 2001	Identical
DIN ISO 965-1:1999-11	Identical
DIN 13-15:1982-08	Similar to
UNE 17707:1978	Identical
BS ISO 965-1:2013 (published 2020-10)	Identical
DIN 13-14:1982-08	Similar to
NBN D 12 101 : 1988	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

ISO 17447-2:2015	Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs
04/30122631 DC : DRAFT SEP 2004	CEN/BT/TF 158 N12 - DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 9: CONNECTORS AND SOCKETS FOR BEVERAGE CONTAINERS, MATING DIMENSIONS
BS ISO 5781:2000	HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
16/30327473 DC : 0	BS ISO 2903 - ISO METRIC TRAPEZOIDAL SCREW THREADS - TOLERANCES
DIN EN 22857:1990-07	GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES; MANUFACTURING TOLERANCES ON THE THREADED PORTION
BS ISO 17447-1:2015	Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for metal-sheath-type glow-plugs
NF EN 3916 : 2009	AEROSPACE SERIES - INSERT, THIN WALL - SALVAGE PROCEDURE FOR COMPONENTS
DIN ISO 261:1999-11	ISO general purpose metric screw threads - General plan (ISO 261:1998)
BS ISO 6149-2:1993	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS
12/30261858 DC : 0	BS EN 60079-31/ED 2 - EXPLOSIVE ATMOSPHERES - PART 31: EQUIPMENT DUST IGNITION PROTECTION BY ENCLOSURE 'T'
BS 308-1.10(1996) : 1996	TECHNICAL DRAWINGS - SCREW THREADS AND THREADED PARTS - GENERAL CONVENTIONS
04/30102972 DC : DRAFT SEP 2004	BS ISO 19812 - ROAD VEHICLES - M10 X 1 COMPACT SPARK PLUGS WITH FLAT SEATING AND 16 MM HEXAGON AND THEIR CYLINDER HEAD HOUSING
16/30340613 DC : 0	BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS
BS ISO 14541:2013	HYDRAULIC FLUID POWER - DIMENSIONS AND REQUIREMENTS FOR SCREW-TO-CONNECT QUICK-ACTION COUPLINGS FOR GENERAL PURPOSE
I.S. EN 22857:1990	GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES - MANUFACTURING TOLERANCES ON THE THREADED PORTION
API 674 : 2010 : INC : ERR 1 : 2015 : R2016	POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
GOST R 52350.1 : 2005	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES "D"
02/103309 DC : DRAFT MAY 2002	BS EN 14455 - DEVICES TO PREVENT POLLUTION BY BLACKFLOW OF POTABLE WATER - PRESSURISED AIR INLET VALVES DN 15 TO DN 50 INCLUSIVE - FAMILY L, TYPE A AND TYPE B
DIN 802-6:2003-07	TOLERANCES ON THE THREADED PORTION OF TAPS - PART 6: GROUND TAPS FOR TAPPED HOLES (EG) FOR WIRE THREAD INSERTS ACCORDING TO DIN 8140 FOR ISO METRIC COARSE AND FINE PITCH THREADS - MANUFACTURING TOLERANCES ON THE THREADED PORTION
05/30135570 DC : DRAFT NOV 2005	ISO 2705 - ROAD VEHICLES - M12 X 1,25 SPARK PLUGS WITH FLAT SEATING AND THEIR CYLINDER HEAD HOUSINGS
DIN 13-10:1999-11	ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm
DIN ISO 6149-3:1996-11	CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
98/714983 DC : DRAFT SEP 1998	ISO/CD 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 4: EXTERNAL HEX AND INTERNAL HEX PORT PLUGS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
BS ISO 28741:2013	ROAD VEHICLES - SPARK-PLUGS AND THEIR CYLINDER HEAD HOUSINGS - BASIC CHARACTERISTICS AND DIMENSIONS
14/30304019 DC : 0	BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
BS ISO 3669:2017	VACUUM TECHNOLOGY - BAKABLE FLANGES - DIMENSIONS OF KNIFE-EDGE FLANGES
CSA C22.2 No. 60079.1 : 2016	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
BS ISO 2346:2001	ROAD VEHICLES - M14 X 1,25 COMPACT SPARK-PLUGS WITH FLAT SEATING AND 19 MM HEXAGON AND THEIR CYLINDER HEAD HOUSING