EI/JIG 1530 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS
Hardcopy , PDF
28-08-2019
English
01-01-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Legal notices and disclaimers
Foreword
Acknowledgements
1 Introduction, scope, application and important definitions
2 Aviation fuel quality assurance and traceability
3 Management of change/new processes
4 Sampling and testing of aviation fuel
5 Laboratories
6 Refineries: Manufacture
7 Additives used in aviation fuels
8 Receipt, batching, certification and release
9 Finished product: Storage design features and handling
procedures
10 Transportation: Facilities and procedures
11 Synthetic jet fuel
Annexes
Annex A - Authorised signatories
Annex B - Example certificates
Annex C - Long term storage and return to use
Annex D - Equipment/installation pre-conditioning prior to use
with aviation fuel
Annex E - Data integrity management flow charts
Annex F - Requirements for and calibration of field equipment
Annex G - Salt dryers and bulk water removal at refineries
Annex H - Clay treaters
Annex I - Jet fuel conductivity
Annex J - Unit conversion factors
Annex K - Glossary of terms and abbreviations
Annex L - Referenced publications
Annex M - Implementing EI/JIG 1530 and how to claim conformance
Specifies mandatory provisions and good practice recommendations for maintaining aviation fuel quality in refineries and in storage, distribution and transport systems including those delivering to airports, covering: - facilities design and construction; - product manufacture; - batching; - testing; - release; - storage and handling; - receipt and discharge; - quality assurance requirements, and - operational procedures.
| DevelopmentNote |
Jointly published by EI and JIG. (02/2014)
|
| DocumentType |
Standard
|
| Pages |
191
|
| PublisherName |
Energy Institute (formerly Institute of Petroleum - IP)
|
| Status |
Superseded
|
| SupersededBy |
| EI 1550 : 2014 | HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL |
| MIL-STD-3004 Revision D:2014 | QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
| EI 1585 : 2013 | GUIDANCE IN THE CLEANING OF AVIATION FUEL HYDRANT SYSTEMS AT AIRPORTS |
| EI HM 50 : 2017 | GUIDELINES FOR THE CLEANING OF TANKS AND LINES FOR MARINE TANK VESSELS CARRYING PETROLEUM AND REFINED PRODUCTS |
| ICAO 9977 : 2012 | MANUAL ON CIVIL AVIATION JET FUEL SUPPLY |
| DEFSTAN 91-91/8(2016) : 2016 | TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| DEFSTAN 91-091/9(2016) : 2016 | TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| ASTM D 1655 : 2018-01 | SPECIFICATION FOR AVIATION TURBINE FUELS |
| EI 1540 : 2014 | DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES |
| EI 1535 : 2016 | MINIMUM CRITERIA TO DETERMINE ACCEPTABILITY OF ADDITIVES FOR USE IN MULTI-PRODUCT PIPELINES CO-TRANSPORTING JET FUEL |
| EI 1581 : 2016 | SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| API MPM CH17.6 : 2014 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.6: GUIDELINES FOR DETERMINING THE FULLNESS OF PIPELINES BETWEEN VESSELS AND SHORE TANKS |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EI 1550 : 2014 | HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL |
| ASTM D 5452 : 2012 : REDLINE | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
| MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
| ISO 1825:2010 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling Specification |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ASTM D 6792 : 2017 : REDLINE | Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories |
| EI 1590 : 2014 | SPECIFICATIONS AND QUALIFICATION PROCEDURES FOR AVIATION FUEL MICROFILTERS |
| EI Model Code of Safe Practice Part 16:2017 | MODEL CODE OF SAFE PRACTICE - PART 16: GUIDANCE ON TANK CLEANING |
| ICAO 9977 : 2012 | MANUAL ON CIVIL AVIATION JET FUEL SUPPLY |
| EI 1596 : 2013 | DESIGN AND CONSTRUCTION OF AVIATION FUEL FILTER VESSELS |
| ASTM D 4306 : 2015 : REDLINE | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ISO 31000:2009 | Risk management Principles and guidelines |
| ANSI MH2 : 2004 | STEEL DRUMS AND PAILS |
| EI 1581 : 2016 | SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
| ABS 0131 : 2004 COR 2012 | GUIDE FOR INERT GAS SYSTEM FOR BALLAST TANKS |
| EI 1583 : 2010 | LABORATORY TESTS AND MINIMUM PERFORMANCE LEVELS FOR AVIATION FUEL FILTER MONITORS |
| API 2003 : 2015 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
| ASTM D 156 : 2015 : REDLINE | Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) |
| ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
| MIL-PRF-25017 Revision H:2011 | INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747) |
| EI HM 50 : 2017 | GUIDELINES FOR THE CLEANING OF TANKS AND LINES FOR MARINE TANK VESSELS CARRYING PETROLEUM AND REFINED PRODUCTS |
| ASTM D 910 : 2017-05 | SPECIFICATION FOR LEADED AVIATION GASOLINES |
| JIG 1 : ISSUE 11 | AVIATION FUEL QUALITY CONTROL & OPERATING STANDARDS FOR INTO-PLANE FUELLING SERVICES |
| ASTM D 2624 : 2015 : REDLINE | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
| ISO 6297:1997 | Petroleum products — Aviation and distillate fuels — Determination of electrical conductivity |
| EI 1542 : 2012 | IDENTIFICATION MARKINGS FOR DEDICATED AVIATION FUEL MANUFACTURING AND DISTRIBUTION FACILITIES, AIRPORT STORAGE AND MOBILE FUELLING EQUIPMENT |
| DEFSTAN 91-91/7(2011) : 2011 | TURBINE FUEL, KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| EI MODEL CODE SAFE PRACTICE PT2 : 3ED 2013 | DESIGN, CONSTRUCTION AND OPERATION OF PETROLEUM DISTRIBUTION INSTALLATIONS |
| ISO 15750-2:2002 | Packaging — Steel drums — Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l |
| EI 1582 : 2011 | SPECIFICATION FOR SIMILARITY FOR EI 1581 AVIATION JET FUEL FILTER/WATER SEPARATORS |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| DEFSTAN 91-86/6(2009) : 2009 | TURBINE FUEL, AVIATION KEROSINE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JSD: AVCAT/FSII |
| EI TP GUID. PETROLEUM LABORATORIES : 1ED 2010 | GUIDANCE ON DEVELOPMENT, IMPLEMENTATION AND IMPROVEMENT OF QUALITY SYSTEMS IN PETROLEUM LABORATORIES |
| MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ABS 0024 : 1980 | GUIDANCE MANUAL FOR MATERIAL SELECTION AND INSPECTION OF INERT GAS SYSTEMS |
| DEFSTAN 91-87/6(2009) : 2009 | TURBINE FUEL, AVIATION KEROSINE TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-34 - JSD: AVTUR/FSII |
| JIG 2 : ISSUE 11 | AVIATION FUEL QUALITY CONTROL & OPERATING STANDARDS FOR AIRPORT DEPOTS & HYDRANTS |
| JIG 3 : ISSUE 11 | AVIATION FUEL QUALITY CONTROL & OPERATING STANDARDS FOR SUPPLY & DISTRIBUTION FACILITIES |
| DEFSTAN 68-251/3(2007) : 2007 | FUEL SOLUBLE LUBRICITY IMPROVING ADDITIVES FOR AVIATION TURBINE FUELS, NATO CODE: S-1747 JOINT SERVICE DESIGNATION: AL-61 |
| API 1110 : 2013 | RECOMMENDED PRACTICE FOR THE PRESSURE TESTING OF STEEL PIPELINES FOR THE TRANSPORTATION OF GAS, PETROLEUM GAS, HAZARDOUS LIQUIDS, HIGHLY VOLATILE LIQUIDS, OR CARBON DIOXIDE |
| DEFSTAN 68-252/3(2005) : 2005 | FUEL SYSTEM ICING INHIBITOR NATO CODE: S-1745 JOINT SERVICE DESIGNATION: AL-41 |
| EI 1540 : 2014 | DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES |
| API 1543 : 2009 | DOCUMENTATION, MONITORING AND LABORATORY TESTING OF AVIATION FUEL DURING SHIPMENT FROM REFINERY TO AIRPORT |
| EI MODEL CODE SAFE PRACTICE PT21 : 3ED 2013 | MODEL CODE OF SAFE PRACTICE - PART 21: GUIDELINES FOR THE CONTROL OF HAZARDS ARISING FROM STATIC ELECTRICITY |
| EI HM 66 : 2016 | GUIDELINES FOR THE BLENDING OF LIQUID HYDROCARBON CARGOES ON BOARD TANK VESSELS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.