ASME B31.4 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
Hardcopy , PDF
11-11-2019
English
31-03-2016
Foreword
Committee Roster
Introduction
Summary of Changes
Chapter I - Scope and Definitions
Chapter II - Design
Chapter III - Materials
Chapter IV - Dimensional Requirements
Chapter V - Construction, Welding, and Assembly
Chapter VI - Inspection and Testing
Chapter VII - Operation and Maintenance Procedures
Chapter VIII - Corrosion Control
Chapter IX - Offshore Liquid Pipeline Systems
Chapter X - Carbon Dioxide Pipeline Systems
Chapter XI - Slurry Pipeline Systems
Mandatory Appendix
I - Referenced Standards
Nonmandatory Appendices
A - Submittal of Technical Inquiries to the B31 Pressure
Piping Committee
B - Publications That Do Not Appear in the Code or Mandatory
Appendix I but May Be of Informational Benefit
Index
Gives requirements for the design, materials, construction, assembly, inspection, testing, operation, and maintenance of piping transporting liquids between production facilities, tank farms, natural gas processing plants, refineries, pump stations, ammonia plants, terminals (marine, rail, and truck), and other delivery and receiving points.
DevelopmentNote |
Supersedes & Incorporates ASME B31.11. (10/2012)
|
DocumentType |
Standard
|
ISBN |
9730791870242
|
Pages |
138
|
PublisherName |
American Society of Mechanical Engineers
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ASCE 7 10 : 2011 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
EN 16125:2015 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
API RP 2611 : 2011 | TERMINAL PIPING INSPECTION - INSPECTION OF IN-SERVICE TERMINAL PIPING SYSTEMS |
CSA ISO 19904-1 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
EN ISO 13628-15:2011 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011) |
API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
API 573 : 2013 | INSPECTION OF FIRED BOILERS AND HEATERS |
NACE RP 02 86 : 2002 | ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES |
API 2FPS : 2011 | PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS |
API 579-1 : 2016 | FITNESS-FOR-SERVICE |
NACE RP 01 85 : 0 | EXTRUDED POLYOLEFIN RESIN COATING SYSTEMS WITH SOFT ADHESIVES FOR UNDERGROUND OR SUBMERGED PIPE |
UFC 3-310-04 : Change 1 | UNIFIED FACILITIES CRITERIA - SEISMIC DESIGN FOR BUILDINGS |
API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
EN ISO 13628-3:2000 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000) |
NACE SP 01 85 : 2007 | EXTRUDED POLYOLEFIN RESIN COATING SYSTEMS WITH SOFT ADHESIVES FOR UNDERGROUND OR SUBMERGED PIPE |
NACE SP 02 86 : 2007 | ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES |
API 1117:2008 | RECOMMENDED PRACTICE FOR MOVEMENT IN IN-SERVICE PIPELINES |
API RP 1133 : 2017 | MANAGING HYDROTECHNICAL HAZARDS FOR PIPELINES LOCATED ONSHORE OR WITHIN COASTAL ZONE AREAS |
API RP 1176 : 2016 | RECOMMENDED PRACTICE FOR ASSESSMENT AND MANAGEMENT OF CRACKING IN PIPELINES |
API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
CEN ISO/TS 24817:2011 | Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006) |
API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
API MPM CH5.8 : 2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5.8: MEASUREMENT OF LIQUID HYDROCARBONS BY ULTRASONIC FLOW METERS |
API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
CSA ISO 19904-1 : 2007 : R2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
AWS B5.4 : 2005 | SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES |
API 2510 : 2001 : R2011 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
EN ISO 14723:2009 | Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009) |
API 1111 : 2015 | DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
EEMUA 185 : 2011 | GUIDE FOR HOT TAPPING ON PIPING AND OTHER EQUIPMENT |
API RP 1177 : 2017 | RECOMMENDED PRACTICE FOR STEEL PIPELINE CONSTRUCTION QUALITY MANAGEMENT SYSTEMS |
API 4783 : 2016 | WATER MANAGEMENT AND STEWARDSHIP IN MIDSTREAM, DOWNSTREAM, AND DELIVERY OPERATIONS IN THE OIL AND GAS INDUSTRY |
API 551 : 2016 | PROCESS MEASUREMENT |
NACE SP 02 10 : 2010 | PIPELINE EXTERNAL CORROSION CONFIRMATORY DIRECT ASSESSMENT |
MSS SP 69 : 2003 | PIPE HANGERS AND SUPPORTS - SELECTION AND APPLICATION |
API RP 2201 : 2003 | SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
NACE RP 05 02 : 2002 | PIPELINE EXTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY |
API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
API 1160 : 2013 | MANAGING SYSTEM INTEGRITY FOR HAZARDOUS LIQUID PIPELINES |
EN 13942:2009 | Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified) |
ASME FFS 1 : 2007 | FITNESS-FOR-SERVICE |
API 17P : 2013 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS |
EN ISO 19904-1:2006 | Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006) |
API 340 : 1997 | LIQUID RELEASE PREVENTION AND DETECTION MEASURES FOR ABOVEGROUND STORAGE FACILITIES |
API RP 2200 : 2015 | REPAIRING HAZARDOUS LIQUID PIPELINES |
API 17O : 2014 | SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
API STD 1163:2013 | IN-LINE INSPECTION SYSTEMS QUALIFICATION |
NACE SP 02 04 : 2015 | STRESS CORROSION CRACKING (SCC) DIRECT ASSESSMENT METHODOLOGY |
API RP 14E : 1991 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
API 6DSS CHINESE : 2009 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
API 2201 : 2003 : R2010 | SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
API SPEC 15HR : 2016 | HIGH-PRESSURE FIBERGLASS LINE PIPE |
API 6D RUSSIAN : 2014 | SPECIFICATION FOR PIPELINE VALVES |
API 1117 : 2008 : INC : ERR 2 : 2009 : R2013 | RECOMMENDED PRACTICE FOR MOVEMENT IN IN-SERVICE PIPELINES |
NACE SP 01 02 : 2017 | IN-LINE INSPECTION OF PIPELINES |
API MPM CH5.8 SPANISH : 2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5.8: MEASUREMENT OF LIQUID HYDROCARBONS BY ULTRASONIC FLOW METERS |
API 675 : 2012 | POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 2510 : 2001 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
API 14E : 1991 : R2013 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
API 939-E : 2013 | IDENTIFICATION, REPAIR, AND MITIGATION OF CRACKING OF STEEL EQUIPMENT IN FUEL ETHANOL SERVICE |
CSA ISO 19904-1 : 2007 : R2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
API 605 : 4ED 88 | LARGE-DIAMETER CARBON STEEL FLANGES (NOMINAL PIPE SIZES 26 THROUGH 60; CLASSES 75, 150, 300, 400, 600 AND 900) |
MSS SP 58 : 2009 | PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION |
UNI EN 13942 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
NACE SP 01 69 : 2013 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
ISO 13628-3:2000 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems |
ISO 24817:2017 | Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection |
NACE SP 02 08 : 2008 | INTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY FOR LIQUID PETROLEUM PIPELINES |
BS EN 16125:2015 | LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
UNE-EN 16125:2016 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
ISO 27913:2016 | Carbon dioxide capture, transportation and geological storage — Pipeline transportation systems |
ASME B31.1 : 2016 | POWER PIPING |
DIN EN 16125:2016-03 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
CSA Z741 :2012 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
NACE SP 01 13 : 2013 | PIPELINE INTEGRITY METHOD SELECTION |
ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
ISO 13628-15:2011 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds |
CAN/CSA-Z662-15 | Oil and gas pipeline systems |
ISO 19904-1:2006 | Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars |
PD 8010-4:2012 | Pipeline systems Steel pipelines on land and subsea pipelines. Code of practice for integrity management |
ISO 14723:2009 | Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves |
BS 5908:1990 | Code of practice for fire precautions in the chemical and allied industries |
API 14E CHINESE : 2007 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
BS EN 13942:2009 | Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves |
ISO/TS 24817:2006 | Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection |
ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
BS EN ISO 13628-15:2011 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds |
CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
BS ISO 27913:2016 | Carbon dioxide capture, transportation and geological storage. Pipeline transportation systems |
UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
API 1169 : 2013 | RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION |
BS EN ISO 13628-3:2001 | Petroleum and natural gas industries. Design and operation of subsea production systems Through flowline (TFL) systems |
API 1110 : 2013 | RECOMMENDED PRACTICE FOR THE PRESSURE TESTING OF STEEL PIPELINES FOR THE TRANSPORTATION OF GAS, PETROLEUM GAS, HAZARDOUS LIQUIDS, HIGHLY VOLATILE LIQUIDS, OR CARBON DIOXIDE |
CSA Z741 : 2012 : R2017 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
NACE SP 05 02 : 2010 | PIPELINE EXTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY |
NACE SP 01 16 : 2016 | MULTIPHASE FLOW INTERNAL CORROSION DIRECT ASSESSMENT (MP-ICDA) METHODOLOGY FOR PIPELINES |
BS EN ISO 13628-1 : 2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
DD CEN ISO/TS 24817:2011 | Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
BS EN ISO 13628-4:1999 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment |
BS EN ISO 24817:2017 | Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
BS EN ISO 19904-1:2006 | Petroleum and natural gas industries. Floating offshore structures Monohulls, semi-submersibles and spars |
BS EN ISO 14723:2009 | Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves |
API RP 17R : 2015 | RECOMMENDED PRACTICE FOR FLOWLINE CONNECTORS AND JUMPERS |
I.S. EN ISO 24817:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION (ISO 24817:2017, CORRECTED VERSION 2018-01-01) |
API 6DSS REDLINE : 2009 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
API 1102 : 2007 : INC : ERR 3 : 2012 | STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS |
API 1102 : 2007 : INC : ERR 5 : 2014 | STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS |
API 1102 : 2007 | STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS |
API 1109 REDLINE : 2010 | MARKING LIQUID PETROLEUM PIPELINE FACILITIES |
API 2T REDLINE : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
I.S. EN ISO 13628-1:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
I.S. EN 16125:2015 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE |
CSA Z245-11 : 2017 | STEEL FITTINGS |
API 1111 REDLINE : 2009 | DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
EEMUA 194 : 2012 | GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |
API 2200 REDLINE : 2010 | REPAIRING CRUDE OIL, LIQUEFIED PETROLEUM GAS, AND PRODUCT PIPELINES |
API RP 2T : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
UNE-EN 16125:2020 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
S.R. CEN ISO TS 24817:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
API 6H : 1998 : R2011 | SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
API RP 17C : 2002 : R2010 | RECOMMENDED PRACTICE ON TFL (THROUGH FLOWLINE) SYSTEMS |
NBR 16381 : 2015 | ONSHORE AND OFFSHORE PIPELINES - SCRAPER-TRAP |
12/30262118 DC | BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
API 17D REDLINE : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
I.S. EN ISO 19904-1:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
ANSI/MSS SP-58:2018 | PIPE HANGERS AND SUPPORTS Materials, Design, Manufacture, Selection, Application, and Installation (ANSI-approved American National Standard) |
API 1102 : 2007 : INC : ERR 4 : 2014 | STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS |
ASCE 7 98 : 2000 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
API 6H CHINESE : 1998 | SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
API 55 : 1995 : R2007 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
I.S. EN ISO 14723:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES |
API 1102 : 2007 : INC : ERR 5 : 2014 : R2015 | STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS |
ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
API 6H : 1998 | SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
I.S. EN 13942:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
API 2T : 2010 : R2015 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
ASME B31E : 2008 | STANDARD FOR THE SEISMIC DESIGN AND RETROFIT OF ABOVE-GROUND PIPING SYSTEMS |
API 1129 : 1996 | ASSURANCE OF HAZARDOUS LIQUID PIPELINE SYSTEM INTEGRITY |
API RP 17C : 2002 | RECOMMENDED PRACTICE ON TFL (THROUGH FLOWLINE) SYSTEMS |
API 55 :1995 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
API 55 : 1995 : R2013 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
API 12F : 2008 | SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
API SPEC 12D : 2017 | SPECIFICATION FOR FIELD-WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
NACE RP 02 86 : 2002 | ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES |
API STD 1104:2013 | WELDING OF PIPELINES AND RELATED FACILITIES |
MSS SP 70 : 2011 | GRAY IRON GATE VALVES, FLANGED AND THREADED ENDS |
ASTM A 505 : 2016 : REDLINE | Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
ASTM A 573/A573M : 2013 : REDLINE | Standard Specification for Structural Carbon Steel Plates of Improved Toughness |
ASTM A 675/A675M : 2014 : REDLINE | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties |
MSS SP 6 : 2017 | STANDARD FINISHES FOR CONTACT FACES OF PIPE FLANGES AND CONNECTING-END FLANGES OF VALVES AND FITTINGS |
NACE SP 01 88 : 2006 | DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES |
ASTM A 225/A225M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel |
ASTM A 181/A181M : 2014 : REDLINE | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping |
ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
ASTM A 29/A29M : 2016 : REDLINE | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
ASTM A 694/A694M : 2016 : REDLINE | Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service |
ASME B16.10 : 2017 | FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
NACE SP 01 85 : 2007 | EXTRUDED POLYOLEFIN RESIN COATING SYSTEMS WITH SOFT ADHESIVES FOR UNDERGROUND OR SUBMERGED PIPE |
ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
MSS SP 67 : 2017 | BUTTERFLY VALVES |
NACE RP 04 02 : 2002 | FIELD-APPLIED FUSION-BONDED EPOXY (FBE) PIPE COATING SYSTEMS FOR GIRTH WELD JOINTS: APPLICATION, PERFORMANCE, AND QUALITY CONTROL |
API std 602 : 2015 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
API STD 600 : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
NACE RP 02 74 : 2004 | HIGH-VOLTAGE ELECTRICAL INSPECTION OF PIPELINE COATINGS |
ASTM A 507 : 2016 : REDLINE | Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
NACE RP 02 81 : 2004 | METHOD FOR CONDUCTING COATING (PAINT) PANEL EVALUATION TESTING IN ATMOSPHERIC EXPOSURES |
ASME B16.20 : 2012 | METALLIC GASKETS FOR PIPE FLANGES |
MSS SP 69 : 2003 | PIPE HANGERS AND SUPPORTS - SELECTION AND APPLICATION |
API 5L : 2012 | LINE PIPE |
MSS SP 78 : 2011 | GRAY IRON PLUG VALVES, FLANGED AND THREADED ENDS |
NACE RP 03 94 : 2002 | APPLICATION, PERFORMANCE, AND QUALITY CONTROL OF PLANT-APPLIED, FUSION-BONDED EPOXY EXTERNAL PIPE COATING |
NACE RP 03 75 : 2006 | FIELD-APPLIED UNDERGROUND WAX COATING SYSTEMS FOR UNDERGROUND PIPELINES: APPLICATION, PERFORMANCE, AND QUALITY CONTROL |
NACE RP 06 02 : 2002 | FIELD-APPLIED COAL TAR ENAMEL PIPE COATING SYSTEMS: APPLICATION, PERFORMANCE, AND QUALITY CONTROL |
NACE MR 01 75 : 2003 | METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
ASTM A 420/A420M : 2016 : REDLINE | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
AWS D3.6M : 2010 | UNDERWATER WELDING CODE |
AWS A3.0 : 0 | STANDARD WELDING TERMS AND DEFINITIONS - INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
NACE RP 03 03 : 2003 | FIELD-APPLIED HEAT-SHRINKABLE SLEEVES FOR PIPELINES: APPLICATION, PERFORMANCE, AND QUALITY CONTROL |
ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
MSS SP 61 : 2013 | PRESSURE TESTING OF VALVES |
ASTM A 217/A217M : 2014 : REDLINE | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
NACE SP 01 69 : 2013 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
API RP 17B : 2014 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
MSS SP 44 : 2016 | STEEL PIPELINE FLANGES |
API 2015 : 2014 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
API 12B : 2014 | SPECIFICATION FOR BOLTED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
ASTM A 449 : 2014 : REDLINE | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
ASME B16.21 : 2016 | NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
ASME B16.49 : 2012 | FACTORY-MADE, WROUGHT STEEL, BUTTWELDING INDUCTION BENDS FOR TRANSPORTATION AND DISTRIBUTION SYSTEMS |
ASTM A 139/A139M : 2016 : REDLINE | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
NACE RP 01 92 : 0 | MONITORING CORROSION IN OIL AND GAS PRODUCTION WITH IRON COUNTS |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
ASTM A 530/A530M : 2012-06 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE |
MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
MSS SP 71 : 2011 | GRAY IRON SWING CHECK VALVES, FLANGED AND THREADED ENDS |
MSS SP 75 : 2014 | HIGH-STRENGTH, WROUGHT, BUTT-WELDING FITTINGS |
API 603 : 2013 | CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
ASTM A 517/A517M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered |
API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
ASTM A 506 : 2016 : REDLINE | Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
ASTM A 515/A515M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
ASTM A 524 : 1996 | Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures |
NACE RP 03 99 : 2004 | PLANT-APPLIED EXTERNAL COAL TAR ENAMEL PIPE COATING SYSTEMS: APPLICATION, PERFORMANCE, AND QUALITY CONTROL |
ASTM A 671 : 2009 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
NACE SP 01 77 : 2014 | MITIGATION OF ALTERNATING CURRENT AND LIGHTNING EFFECTS ON METALLIC STRUCTURES AND CORROSION CONTROL SYSTEMS |
API 1110 : 2013 | RECOMMENDED PRACTICE FOR THE PRESSURE TESTING OF STEEL PIPELINES FOR THE TRANSPORTATION OF GAS, PETROLEUM GAS, HAZARDOUS LIQUIDS, HIGHLY VOLATILE LIQUIDS, OR CARBON DIOXIDE |
NACE SP 02 00 : 2014 | STEEL-CASED PIPELINE PRACTICES |
API RP 2200 : 2015 | REPAIRING HAZARDOUS LIQUID PIPELINES |
API 1109 : 2010 | LINE MARKERS AND SIGNAGE FOR HAZARDOUS LIQUID PIPELINES AND FACILITIES |
MSS SP 58 : 2009 | PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION |
ASME B16.25 : 2012 | BUTTWELDING ENDS |
ASTM A 285/A285M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
API 1111 : 2015 | DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
NACE SP 04 90 : 2007 | HOLIDAY DETECTION OF FUSION-BONDED EPOXY EXTERNAL PIPELINE COATINGS OF 250 TO 760 MICROM (10 TO 30 MIL) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.