EN 10208-2:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
EN 10107:2014
|
Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
EURONORM 54 : 1980
|
HOT-ROLLED SMALL U-BEAMS |
EN 10162:2003
|
Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
ISO 10241:1992
|
International terminology standards Preparation and layout |
EN 10305-5:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
EN 10048:1996
|
Hot rolled narrow steel strip - Tolerances on dimensions and shape |
ISO 6929:2013
|
Steel products — Vocabulary |
EN 10051:2010
|
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
EN 39:2001
|
Loose steel tubes for tube and coupler scaffold - Technical delivery conditions |
EN 10140:2006
|
Cold rolled narrow steel strip - Tolerances on dimensions and shape |
EN 10169-1:2003
|
Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
EN 10106:2015
|
Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
EN 10216-5:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
EN 10305-3:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
EN 10218-2:2012
|
Steel wire and wire products - General - Part 2: Wire dimensions and tolerances |
EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
EN 10056-2:1993
|
Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions |
EN 10305-6:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
EN 10248-2:1995
|
Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
EN 10279:2000
|
Hot rolled steel channels - Tolerances on shape, dimensions and mass |
EN 10312:2002/A1:2005
|
WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
EN 10034:1993
|
Structural steel I and H sections - Tolerances on shape and dimensions |
PREN 10138-2 : DRAFT 2000
|
PRESTRESSING STEELS - PART 2: WIRE |
EN 10217-4:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
EN 10216-2:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
EN 10202:2001/AC:2003
|
COLD REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE AND ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE COATED STEEL |
EN 10080:2005
|
Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
EN 10205:2016
|
Cold reduced tinmill products - Blackplate |
EURONORM 53 : 1962
|
HOT-ROLLED BROAD FLANGED I-BEAMS (WIDE-FLANGED I-BEAMS) WITH PARALLEL FLANGE FACINGS |
EN 10131:2006 (edition 2)
|
Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
EN 10024:1995
|
Hot rolled taper flange I sections - Tolerances on shape and dimensions |
EN 10305-2:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
EN 10305-1:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
EN 10092-1:2003
|
Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions |
EN ISO 1127:1996
|
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
EN 10210-2:2006/AC:2007
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES |
EURONORM 19 : 1957
|
IPE BEAMS - I-BEAMS WITH PARALLEL FLANGE FACINGS |
EN 10217-7:2014
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
EN 10305-4:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
EN 10278:1999
|
Dimensions and tolerances of bright steel products |
EN 10060:2003
|
Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
EN 10108:2004
|
Round steel rod for cold heading and cold extrusion - Dimensions and tolerances |
EN 10143:2006 (edition 2)
|
Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
EN 10296-2:2005/AC:2007
|
WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
EN 10250-1:1999
|
Open die steel forgings for general engineering purposes - Part 1: General requirements |
EN 10017:2004
|
Steel rod for drawing and/or cold rolling - Dimensions and tolerances |
EN 10297-2:2005/AC:2007
|
SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
EN 10217-2:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
EN 10294-1:2005
|
Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
EN 10224:2002/A1:2005
|
NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
EN 10217-3:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
EN 10296-1:2003
|
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
EN 10020:2000
|
Definition and classification of grades of steel |
EN 10219-2:2006
|
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
EN 10297-1:2003
|
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
EN 10061:2003
|
Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
EN 10059:2003
|
Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
EN 10216-1:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
EN 10092-2:2003
|
Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions |
PREN 10138-4 : DRAFT 2000
|
PRESTRESSING STEELS - PART 4: BARS |
EN 10216-4:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
EN 10055:1995
|
Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
EN 10208-1:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
EN 10220:2002
|
Seamless and welded steel tubes - Dimensions and masses per unit length |
EN 10265:1995
|
Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
EN 10341:2006
|
Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state |
EN 10303:2015
|
Thin magnetic steel strip and sheet for use at medium frequencies |
EN 10067:1996
|
Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass |
EURONORM 91 : 1981
|
HOT-ROLLED WIDE FLATS - PERMISSIBLE DEVIATIONS FOR DIMENSION, FORM AND WEIGHT |
EN 10217-1:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
EN 10217-5:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
EN 10217-6:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
EN 10216-3:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
EN 10255:2004+A1:2007
|
Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
EN 10222-1:2017
|
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
ISO 1127:1992
|
Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
EN 10249-2:1995
|
Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |