BS EN 846-14:2012
|
Methods of test for ancillary components for masonry Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it |
BS EN 16506:2014
|
Systems for renovation of drains and sewers. Lining with a rigidly anchored plastics inner layer (RAPL) |
DIN EN 16506 E : 2014
|
SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
I.S. EN 1015-11:2000
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
PREN 1504-2 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
DIN EN 16506:2014-12
|
SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
99/103841 DC : DRAFT MAY 1999
|
EN 1015-14 - METHODS OF TEST FOR MORTAR - PART 14: DETERMINATION OF DURABILITY OF HARDENED MASONRY MORTARS (WITH 50% OF THE CEMENT COMPRISING GREATER THAN TOTAL BINDER MASS) |
PREN 1015-11 : DRAFT 2017
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
UNE-EN 846-14:2013
|
Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it |
DIN EN 1504-2:2015-03 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
BS EN 1015-12:2016
|
Methods of test for mortar for masonry Determination of adhesive strength of hardened rendering and plastering mortars on substrates |
BS EN 1052-3:2002
|
Methods of test for masonry Determination of initial shear strength |
BS EN 1015-9:1999
|
Methods of test for mortar for masonry Determination of workable life and correction time of fresh mortar |
BS EN 846-8:2000
|
Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of joist hangers |
BS EN 450-1:2012
|
Fly ash for concrete Definition, specifications and conformity criteria |
BS EN 1015-18:2002
|
Methods of test for mortar for masonry Determination of water absorption coefficient due to capillary action of hardened mortar |
EN 13395-1:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars |
EN 1015-18:2002
|
Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar |
EN 1015-9:1999/A1:2006
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 9: DETERMINATION OF WORKABLE LIFE AND CORRECTION TIME OF FRESH MORTAR |
EN 1052-4:2000
|
Methods of test for masonry - Part 4: Determination of shear strength including damp proof course |
DIN EN 14891:2017-05
|
LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
EN 1052-5:2005
|
Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method |
EN 1015-21:2002
|
Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates |
EN 1015-12:2016
|
Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates |
EN 1052-2:2016/AC:2017
|
METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH |
EN 1015-11 : 1999 AMD 1 2006
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
EN 1015-6:1998/A1:2006
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 6: DETERMINATION OF BULK DENSITY OF FRESH MORTAR |
10/30212141 DC : 0
|
BS EN 846-14 - METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: LINTELS |
UNI EN 846-14 : 2012
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT |
11/30248435 DC : 0
|
BS EN 14891 - LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
14/30314741 DC : 0
|
BS EN 14891 - LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
02/102876 DC : DRAFT APR 2002
|
PREN 1052-5 - METHODS OF TEST FOR MASONRY - PART 5: DETERMINATION OF BOND STRENGTH BY THE BOND WRENCH METHOD |
17/30351887 DC : 0
|
BS EN 1015-11 - METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
UNE-EN 14891:2017
|
Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
DIN EN 1015-10:2007-05
|
Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar (includes Amendment A1:2006) |
DIN EN 14891 E : 2017
|
LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
DIN EN 14891:2015-02 (Draft)
|
LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
BS EN 1052-5:2005
|
Methods of test for masonry Determination of bond strength by the bond wrench method |
I.S. EN 450-1:2012
|
FLY ASH FOR CONCRETE - PART 1: DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
DIN EN 1052-5:2005-06
|
Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method |
DIN EN 1052-3:2007-06
|
Methods of test for masonry - Part 3: Determination of initial shear strength (includes Amendment A1:2007) |
I.S. EN 846-7:2012
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
DIN EN 1015-11:2007-05
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
I.S. EN 1052-2:2016
|
METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH |
DIN EN 1015-6:2007-05
|
Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar (includes Amendment A1:2006) |
I.S. EN 846-5:2012
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
I.S. EN 1015-12:2016
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 12: DETERMINATION OF ADHESIVE STRENGTH OF HARDENED RENDERING AND PLASTERING MORTARS ON SUBSTRATES |
DIN EN 1052-2:2016-08
|
METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH |
DIN EN 1015-2:2007-05
|
Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars (includes Amendment A1:2006) |
DIN EN 1015-9:2007-05
|
Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar (includes Amendment A1:2006) |
I.S. EN 14891:2017
|
LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
I.S. EN 13395-1:2002
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF WORKABILITY - PART 1: TEST FOR FLOW OF THIXOTROPIC MORTARS |
93/102674 DC : 0
|
PREN 1015-13 - METHODS OF TEST FOR MORTAR FOR MASONRY - PART 13: DETERMINATION OF DIMENSIONAL STABILITY OF HARDENED MORTARS |
UNI EN 16506 : 2014
|
SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
DIN EN 846-14:2012-11
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT |
14/30278089 DC : 0
|
BS ISO 13007-5 - CERAMIC TILES - GROUTS AND ADHESIVES - PART 5: LIQUID APPLIED WATERPROOFING MEMBRANES FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
06/30119204 DC : 0
|
EN 14891 - LIQUID-APPLIED WATERPROOFING MEMBRANES FOR USE BENEATH CERAMIC TILING - DEFINITIONS, SPECIFICATIONS AND TEST METHODS |
PREN 14891 : DRAFT 2014
|
LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
BS EN 1015-11:1999
|
Methods of test for mortar for masonry Determination of flexural and compressive strength of hardened mortar |
DIN EN 1015-17:2005-01
|
Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars |
BS EN 1052-4:2000
|
Methods of test for masonry Determination of shear strength including damp proof course |
BS EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
UNE-EN 846-5:2013
|
Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
DIN EN 1504-2:2005-01
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
EN 16506:2014
|
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
UNI EN 846-7 : 2012
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
UNI EN 846-5 : 2012
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
UNI EN 1052-4 : 2001
|
METHODS OF TEST FOR MASONRY - DETERMINATION OF SHEAR STRENGTH INCLUDING DAMP PROOF COURSE |
UNI EN 450-1 : 2012
|
FLY ASH FOR CONCRETE - PART 1: DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
PREN 846-5 : DRAFT 2010
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
10/30212138 DC : 0
|
BS EN 846-7 - METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
10/30212132 DC : 0
|
BS EN 846-5 - METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
I.S. EN 846-14:2012
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT |
15/30316975 DC : 0
|
BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
BS EN 1052-2:2016
|
Methods of test for masonry Determination of flexural strength |
UNE-EN 1504-2:2005
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
BS EN 846-2:2000
|
Methods of test for ancillary components for masonry Determination of bond strength of prefabricated bed joint reinforcement in mortar joints |
BS EN 13395-1:2002
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Test for flow of thixotropic mortars |
BS EN 1015-6:1999
|
Methods of test for mortar for masonry Determination of bulk density of fresh mortar |
BS EN 1015-2:1999
|
Methods of test for mortar for masonry Bulk sampling of mortars and preparation of test mortars |
UNE-EN 1015-12:2016
|
Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates |
BS EN 846-5:2012
|
Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
UNE-EN 450-1:2013
|
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria |
BS EN 1015-21:2002
|
Methods of test for mortar for masonry Determination of the compatibility of one-coat rendering mortars with substrates |
BS EN 846-7:2012
|
Methods of test for ancillary components for masonry Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
UNE-EN 846-7:2015
|
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
EN 450-1:2012
|
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria |
EN 846-7:2012
|
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
EN 14891:2017
|
Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
EN 846-5:2012
|
Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
EN 846-2:2000
|
Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints |
EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
EN 846-14:2012
|
Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it |
EN 846-8:2000/A1:2006
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 8: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF JOIST HANGERS |
EN 846-4:2001/A1:2004
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 4: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF STRAPS |
93/102669 DC : DRAFT APR 1993
|
PREN 1015-8 - METHODS OF TEST FOR MORTAR FOR MASONRY - PART 8: DETERMINATION OF WATER RETENTIVITY OF FRESH MORTAR |
BS ISO 13007-5:2015
|
Ceramic tiles. Grouts and adhesives Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
UNE-EN 16506:2015
|
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
I.S. EN 16506:2014
|
SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
PREN 846-7 : DRAFT 2010
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
ISO 13007-5:2015
|
Ceramic tiles Grouts and adhesives Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
BS EN 14891:2017
|
Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
BS EN 1015-10:1999
|
Methods of test for mortar for masonry Determination of dry bulk density of hardened mortar |
BS EN 846-4:2002
|
Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of straps |
BS EN 1015-17:2000
|
Methods of test for mortar for masonry Determination of water-soluble chloride content of fresh mortars |
EN 1015-17:2000/A1:2004
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 17: DETERMINATION OF CHLORIDE CONTENT OF FRESH MORTARS |
EN 1015-2:1998/A1:2006
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 2: BULK SAMPLING OF MORTARS AND PREPARATION OF TEST MORTARS |
DIN EN 846-7:2012-11
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
EN 1015-10:1999/A1:2006
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 10: DETERMINATION OF DRY BULK DENSITY OF HARDENED MORTAR |
EN 1052-3:2002/A1:2007
|
METHODS OF TEST FOR MASONRY - PART 3: DETERMINATION OF INITIAL SHEAR STRENGTH |
DIN EN 846-4:2005-01
|
Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps |
DIN EN 846-5:2012-11
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
DIN EN 450-1:2012-10
|
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria |