EN 1028-2:2002+A1:2008

Current

Current The latest, up-to-date edition.

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements

Available format(s):

Language(s):

Published date: 08-04-2008

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
0 Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Verifications
  4.1 General
  4.2 Type verification
  4.3 Individual verification
  4.4 Methods of verification
      4.4.1 Calculation check
      4.4.2 Design check
      4.4.3 Compliance verification (manufacturing check)
  4.5 Measuring instruments
5 Verification of the safety requirements and/or protective
  measures
6 Verification of the general and performance requirements
7 Test report
Annex A (normative) Suction line for tests
Annex B (normative) Pressure measurements
Annex C (normative) Measurements of delivery rates
Annex D (normative) Dry suction test
Annex E (normative) Performance test
Annex F (normative) Working test
Annex G (normative) Pressure test
Annex H (normative) Efficiency test
Annex I (normative) Primer test
Annex J (normative) Cold test
Annex K (informative) Guidance for acceptance tests on delivery
Annex ZA (informative) Relationship between this European Standard
         and the Essential Requirements of EU Directive 98/37/EC
Annex ZB (informative) Relationship between this European Standard
         and the Essential Requirements of EU Directive 2006/42/EC
Bibliography

Abstract - (Show below) - (Hide below)

This European Standard covers verification of the general and safety requirements of fire-fightingcentrifugal pumps with primer as specified in clauses 7 and 8 of !EN 1028-1:2002+A1:2008.NOTE The tests can also be applied to pumps with nominal delivery rates greater than 6 000 l/min.This standard does not apply to verification related to installation.This standard does not apply to fire-fighting centrifugal pumps with primer that are manufacturedbefore the date of publication by CEN of this standard.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 192
Development Note	2002 Edition Re-Issued in April 2008 & incorporates AMD 1 2008. (04/2008)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NBN EN 1028-2 : 2002 + A1 2008	Identical
SN EN 1028-2 : 2002 + A1 2008	Identical
07/30171532 DC : 0	Identical
BS EN 1028-2 : 2002	Identical
I.S. EN 1028-2:2002	Identical
UNI EN 1028-2 : 2008	Identical
PN EN 1028-2 : 2006 + A1 2008	Identical
NF EN 1028-2 : 2002 + A1 2008	Identical
UNE-EN 1028-2:2003	Identical
NEN EN 1028-2 : 2002 + A1 2008	Identical
NS EN 1028-2 : 2002 + A1 2008	Identical
UNE-EN 1028-2:2003+A1:2008	Identical
BS EN 1028-2:2002+A1:2008	Identical
DIN EN 1028-2:2008-06	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

S.R. CEN/TR 16099:2010	FIRE SERVICE EQUIPMENT - SUMMARY OF WATER PRESSURES SPECIFIED IN PUBLISHED CEN/TC 192 STANDARDS
PD CEN/TR 16099:2010	Fire service equipment. Summary of water pressures specified in published CEN/TC 192 standards
BS EN 14466 : 2005	FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
BS EN 12162 : 2001	LIQUID PUMPS - SAFETY REQUIREMENTS - PROCEDURE FOR HYDROSTATIC TESTING
DIN EN 14710-2:2009-06	Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements (includes Amendment A2:2008)
CEN/TR 16099:2010	Fire service equipment - Summary of water pressures specified in published CEN/TC 192 standards
EN 12162:2001+A1:2009	Liquid pumps - Safety requirements - Procedure for hydrostatic testing
UNE-EN 16327:2015	Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
DIN EN 14466:2008-09	FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
DIN EN 14710-2 E : 2009	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
I.S. EN 1028-1:2002	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
I.S. EN 1846-3:2013	FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
I.S. EN 1846-1:2011	FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 1: NOMENCLATURE AND DESIGNATION
I.S. EN 14466:2005	FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
I.S. EN 14710-1:2005	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
I.S. EN 809:1998	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
I.S. EN 12162:2001	LIQUID PUMPS - SAFETY REQUIREMENTS - PROCEDURE FOR HYDROSTATIC TESTING
I.S. EN 14710-2:2005	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
UNI EN 16327 : 2014	FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
DIN EN 14466 E : 2008	FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
DIN EN 12162:2010-05	Liquid pumps - Safety requirements - Procedure for hydrostatic testing
BS EN 809 : 1998	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
EN 809 : 1998 COR 2010	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
EN 809:1998+A1:2009	Pumps and pump units for liquids - Common safety requirements
EN 1846-3:2013	Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance
UNI EN 1846-3 : 2013	FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
UNI EN 1846-1 : 2011	FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 1: NOMENCLATURE AND DESIGNATION
UNI EN 12162 : 2009	LIQUID PUMPS - SAFETY REQUIREMENTS - PROCEDURE FOR HYDROSTATIC TESTING
UNI EN 14710-1 : 2009	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
UNI EN 809 : 2009	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
UNI EN 1028-1 : 2008	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
UNI EN 14466 : 2008	FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
UNI EN 14710-2 : 2009	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
BS EN 16327:2014	Fire-fighting. Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
DIN EN 809:2012-10	Pumps and pump units for liquids - Common safety requirements
BS EN 1028-1 : 2002	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
BS EN 1846-3:2013	Firefighting and rescue service vehicles Permanently installed equipment. Safety and performance
BS EN 14710-1 : 2005	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
UNE-EN 1846-1:2011	Firefighting and rescue service vehicles - Part 1: Nomenclature and designation
BS EN 14710-2 : 2005	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
EN 14710-2:2005+A2:2008	Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements
EN 14466:2005+A1:2008	Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests
EN 14710-1:2005+A2:2008	Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements
EN 16327:2014	Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
EN 1846-1:2011	Firefighting and rescue service vehicles - Part 1: Nomenclature and designation
EN 1028-1:2002+A1:2008	Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements
03/112610 DC : DRAFT AUG 2003	EN 14710-1 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY
03/112612 DC : DRAFT AUG 2003	EN 14710-2 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
DIN EN 16327:2014-07	FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
I.S. EN 16327:2014	FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
BS EN 809:1998+A1:2009	Pumps and pump units for liquids. Common safety requirements
DIN EN 1028-1:2008-09	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
DIN EN 14710-1 E : 2009	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
BS EN 1846-1:2011	Firefighting and rescue service vehicles Nomenclature and designation
UNE-EN 1846-3:2015	Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance
DIN EN 14710-1:2009-06	Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements
DIN EN 1846-1:2011-07	Fire fighting and rescue service vehicles - Part 1: Nomenclature and designation
DIN EN 1846-3:2013-11	FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
UNE-EN 809:1999	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS

Standards Referencing This Book - (Show below) - (Hide below)

ISO 5199:2002	Technical specifications for centrifugal pumps — Class II
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 292-1 : 1991	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
EN ISO 1127:1996	Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
EN 563:1994/A1:1999/AC:2000	SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
EN 1028-1:2002+A1:2008	Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements
EN 292-2 : 91 AMD 1 95	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
1998/37/EC : 1998	DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
EN 837-3:1996	Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
EN 25199 : 1992	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS SECOND
EN 1070 : 1998	SAFETY OF MACHINERY - TERMINOLOGY
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart