EN 12195-3:2001
Current
The latest, up-to-date edition.
Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains
11-04-2001
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Safety requirements
6 Verification of safety requirements
7 Instructions for use
8 Marking
9 Manufacturer's certificate
Annex A (normative) Hazards
Annex B (normative) Specification for information
for use and maintenance to be provided by the
manufacturer
Bibliography
This Part of EN 12195 specifies safety requirements for lashing chains and lashing combinations with chain for the safe surface transport of goods on load carriers, e.g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof. The standard includes only tensioning devices to be hand driven with a maximum handforce of 500 N. It does not give requirements for multi-purpose lover blocks other than to the type of fine calibrated chain and the additional marking of the maximum hand-operating force.This part of EN 12195 deals with hazards which could occur when lashing chains are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).
Committee |
CEN/TC 168
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
NEN EN 12195-3 : 2001 | Identical |
BS EN 12195-3:2001 | Identical |
UNI EN 12195-3 : 2003 | Identical |
I.S. EN 12195-3:2001 | Identical |
NS EN 12195-3 : 1ED 2001 | Identical |
UNE-EN 12195-3:2002 | Identical |
SN EN 12195-3 : 2001 | Identical |
NF EN 12195-3 : 2001 | Identical |
PN EN 12195-3 : 2003 | Identical |
DIN EN 12195-3:2001-07 | Identical |
NBN EN 12195-3 : 2001 | Identical |
DIN ISO 27956:2011-11 | Road vehicles - Securing of cargo in delivery vans - Requirements and test methods (ISO 27956:2009) |
BS ISO 27956:2009 | Road vehicles. Securing of cargo in delivery vans. Requirements and test methods |
12/30274592 DC : 0 | BS ISO 15818 - EARTH-MOVING MACHINERY - LIFTING AND TYING-DOWN ATTACHMENT POINTS - PERFORMANCE REQUIREMENTS |
ISO 15818:2017 | Earth-moving machinery Lifting and tying-down attachment points Performance requirements |
I.S. EN 12195-1:2010 | LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES |
EN 12195-4:2003 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
BS ISO 15818:2017 | Earth-moving machinery. Lifting and tying-down attachment points. Performance requirements |
DIN EN 12195-4:2004-04 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
BS EN 12195-1:2010 | Load restraining on road vehicles. Safety Calculation of securing forces |
VDI 2700 Blatt 16:2009-07 | Securing of loads on road vehicles - Securing of loads on transporter up to a total mass of 7,5 t |
VDI 2700 Blatt 3.3:2013-05 | Securing of loads on road vehicles - Cargo nets for load securing |
VDI 2700 Blatt 17:2009-04 | Securing of loads on road vehicles - Securing of skips on skip loader vehicles and their trailers |
VDI 3968 Blatt 1:2013-04 | Securing of load units - Specification of requirements |
VDI 2700 Blatt 5:2011-12 | Securing of loads on road vehicles - Quality management systems |
VDI 4460:2003-03 | Returnable transport packages and recycling systems for efficient load transport |
VDI 2700 Blatt 19:2011-01 | Securing of loads on road vehicles - Rolled steel strip, sheets, and section steel |
VDI 2700 Blatt 2:2014-07 | Securing of loads on road vehicles - Calculation of tie-down forces - Fundamentals |
VDI 2700:2004-11 | Securing of loads on road vehicles |
VDI 2700 Blatt 7:2014-07 | Securing of loads on road vehicles - Safety of loads in combined transport |
VDI 2700 Blatt 11:2006-10 | Securing of loads on road vehicles - Securing of reinforcing steel |
VDI 2700 Blatt 3.1:2006-10 | Securing of loads on road vehicles - Instruction manual for lashings |
VDI 2700 Blatt 10.1:2016-11 | Securing of loads on road vehicles - Securing of precast concrete elements - Plane concrete elements |
VDI 2700 Blatt 12:2009-01 | Securing of loads on road vehicles - Securing of beverage products |
VDI 2700 Blatt 3.2:2006-09 | Securing of loads on road vehicles - Vehicles equipments and securing aids for load |
08/30173492 DC : DRAFT JAN 2008 | BS EN 12195-1 - LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES |
STANAG 2830 : 2009 | MATERIAL HANDLING AIDS |
08/30180978 DC : DRAFT APR 2008 | BS ISO 27956 - ROAD VEHICLES - SECURING OF CARGO IN DELIVERY VANS - REQUIREMENTS AND TEST METHODS |
ISO 27956:2009 | Road vehicles — Securing of cargo in delivery vans — Requirements and test methods |
UNE-EN 12195-1:2011 | Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces |
BS EN 12195-4:2003 | Load restraint assemblies on road vehicles. Safety Lashing steel wire ropes |
17/30354108 DC : 0 | BS EN 17106-1 - ROAD OPERATION MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
DIN EN 12195-1:2011-06 | LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES |
EN 1677-4:2000+A1:2008 | Components for slings - Safety - Part 4: Links, Grade 8 |
EN 818-2:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8 |
EN 1677-2:2000+A1:2008 | Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 |
EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
EN 1677-1:2000+A1:2008 | Components for slings - Safety - Part 1: Forged steel components, Grade 8 |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
PREN 12195-1 : DRAFT 1995 | LOAD RESTRAINT ASSEMBLIES - SAFETY - PART 1: CALCULATION OF LASHING FORCES |
ISO 9001:2015 | Quality management systems — Requirements |
EN 818-1:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.