• Shopping Cart
    There are no items in your cart

EN 12195-4:2003

Current

Current

The latest, up-to-date edition.

Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes

Published date

17-12-2003

Sorry this product is not available in your region.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Safety requirements
  5.1 General
  5.2 Construction of lashing steel wire ropes and flat
      lashing steel wire ropes
      5.2.1 Wire ropes
      5.2.2 Formation of eyes
      5.2.3 Length
      5.2.4 Lashing capacity (LC) for a single leg
            lashing steel wire rope
  5.3 Tensioning devices
  5.4 Connecting components
  5.5 Tension force indicator (optional)
  5.6 Mechanical properties
      5.6.1 Lashing capacity (LC)
      5.6.2 Proof force
      5.6.3 Breaking force (BF)
6 Verification of safety requirements and type testing
  6.1 General
  6.2 Test frequency
  6.3 Tensile testing of a lashing steel wire rope and
      flat lashing steel wire rope
7 Instructions for use
8 Marking
9 Manufacturer's certificate
Annex A (normative) Hazards
Annex B (normative) Specification for information for
        use and maintenance to be provided by the
        manufacturer
Bibliography

This Part 4 of EN 12195- specifies safety requirements for lashing steel wire ropes and flat lashing steel wire ropes and lashing combina-tions with lashing steel wire ropes for the safe surface transport of loads on load carriers, e. g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof;- stipulates procedures for testing lashing steel wire ropes and flat lashing steel wire ropes;- deals with hazards which could occur when lashing steel wire ropes and flat lashing steel wire ropes are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).

Committee
CEN/TC 168
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

I.S. EN 12195-1:2010 LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES
BS EN 12195-1:2010 Load restraining on road vehicles. Safety Calculation of securing forces
VDI 2700 Blatt 16:2009-07 Securing of loads on road vehicles - Securing of loads on transporter up to a total mass of 7,5 t
VDI 2700 Blatt 3.3:2013-05 Securing of loads on road vehicles - Cargo nets for load securing
VDI 2700 Blatt 17:2009-04 Securing of loads on road vehicles - Securing of skips on skip loader vehicles and their trailers
VDI 3968 Blatt 1:2013-04 Securing of load units - Specification of requirements
VDI 2700 Blatt 5:2011-12 Securing of loads on road vehicles - Quality management systems
VDI 2700 Blatt 19:2011-01 Securing of loads on road vehicles - Rolled steel strip, sheets, and section steel
VDI 2700 Blatt 2:2014-07 Securing of loads on road vehicles - Calculation of tie-down forces - Fundamentals
VDI 2700:2004-11 Securing of loads on road vehicles
VDI 2700 Blatt 7:2014-07 Securing of loads on road vehicles - Safety of loads in combined transport
VDI 2700 Blatt 11:2006-10 Securing of loads on road vehicles - Securing of reinforcing steel
VDI 2700 Blatt 3.1:2006-10 Securing of loads on road vehicles - Instruction manual for lashings
VDI 2700 Blatt 10.1:2016-11 Securing of loads on road vehicles - Securing of precast concrete elements - Plane concrete elements
VDI 2700 Blatt 12:2009-01 Securing of loads on road vehicles - Securing of beverage products
VDI 2700 Blatt 3.2:2006-09 Securing of loads on road vehicles - Vehicles equipments and securing aids for load
08/30173492 DC : DRAFT JAN 2008 BS EN 12195-1 - LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES
STANAG 2830 : 2009 MATERIAL HANDLING AIDS
UNE-EN 12195-1:2011 Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces
17/30354108 DC : 0 BS EN 17106-1 - ROAD OPERATION MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN 12195-1:2011-06 LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES

EN 12385-4:2002+A1:2008 Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
EN 12385-1:2002+A1:2008 Steel wire ropes - Safety - Part 1: General requirements
EN 1677-5:2001+A1:2008 Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4
EN 1677-4:2000+A1:2008 Components for slings - Safety - Part 4: Links, Grade 8
EN 13411-2:2001+A1:2008 Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings
EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety
EN 1677-2:2000+A1:2008 Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8
EN 12195-3:2001 Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains
EN 292-1 : 1991 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
EN 12195-2:2000 Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres
PREN 13411-3 : DRAFT 1999 TERMINATION FOR STEEL WIRE ROPES - SAFETY - PART 3 - FERRULE-SECURED EYES
EN 1677-1:2000+A1:2008 Components for slings - Safety - Part 1: Forged steel components, Grade 8
EN 13411-1:2002+A1:2008 Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 1677-6:2001+A1:2008 Components for slings - Safety - Part 6: Links - Grade 4
ISO 9001:2015 Quality management systems — Requirements
EN 292-2 : 91 AMD 1 95 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.