EN 12543-2:2008
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
Superseded date
24-04-2021
Superseded by
Published date
16-07-2008
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test equipment
5 Measurement and determination of the focal spot size
Annex A (informative) - Preferred values of d for the
characterization of X-ray tube types
Bibliography
This European Standard specifies a method for the measurement of focal spot dimensions above 0,2 mm of X-ray systems up to and including 500 kV tube voltage by means of the pinhole camera radiographic method. The voltage applied for this measurement is restricted to 200 kV for visual film evaluation. The image quality and the resolution of X-ray images depend highly on the characteristics of the focal spot, in particular the size and the two dimensional intensity distribution. For the characterisation of commercial X-ray tube types (i.e. for advertising or trade) the specific values of Table A.1 are used.
| Committee |
CEN/TC 138
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNI EN 12543-2 : 2008 | Identical |
| PN EN 12543-2 : 2008 | Identical |
| I.S. EN 12543-2:2008 | Identical |
| DIN EN 12543-2:2008-10 | Identical |
| ISO 12543-2:2011 | Identical |
| NEN EN 12543-2 : 2008 | Identical |
| BS EN 12543-2:2008 | Identical |
| UNE-EN 12543-2:2009 | Identical |
| NBN EN 12543-2 : 2008 | Identical |
| NF EN 12543-2 : 2008 | Identical |
| NS EN 12543-2 : 2ED 2008 | Identical |
| SN EN 12543-2 : 2008 | Identical |
| ONORM EN 12543-2 : 2009 | Identical |
| 12/30258737 DC : 0 | BS EN 16407-2 - NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: TANGENTIAL RADIOGRAPHIC INSPECTION |
| 17/30361503 DC : 0 | BS EN ISO 20769-1 - NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 1: TANGENTIAL RADIOGRAPHIC INSPECTION |
| BS EN 16407-2:2014 | Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Double wall radiographic inspection |
| ASTM E 1165 : 2012 : R2017 | Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
| 12/30258734 DC : DRAFT APR 2012 | BS EN 16407-1 - NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 1: TANGENTIAL RADIOGRAPHIC INSPECTION |
| 99/711365 DC : DRAFT JUL 99 | EN 13068-3 - NON-DESRUCTUVE TESTING - RADIOSCOPIC TESTING - PART 3: GENERAL PRINCIPLES OF RADIOSCOPIC TESTING OF METALLIC MATERIALS BY X- AND GAMMA RAYS |
| I.S. EN ISO 5579:2013 | NON-DESTRUCTIVE TESTING - RADIOGRAPHIC TESTING OF METALLIC MATERIALS USING FILM AND X- OR GAMMA RAYS - BASIC RULES (ISO 5579:2013) |
| PREN 16407-2 : DRAFT 2012 | NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: TANGENTIAL RADIOGRAPHIC INSPECTION |
| VDI/VDE 2630 Blatt 1.2:2010-11 | Computed tomography in dimensional measurement - Influencing variables on measurement results and recommendations for computed tomography dimensional measurements |
| VDI/VDE 5575 Blatt 2:2015-06 | X-ray optical systems - Measurement methods - Measurement set-up and methods for the evaluation of X-ray optical systems |
| BS EN ISO 5579:2013 | Non-destructive testing. Radiographic testing of metallic materials using film and X- or gamma rays. Basic rules |
| BS EN 16407-1:2014 | Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Tangential radiographic inspection |
| UNI EN 16407-2 : 2014 | NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: DOUBLE WALL RADIOGRAPHIC INSPECTION |
| I.S. EN 16407-2:2014 | NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: DOUBLE WALL RADIOGRAPHIC INSPECTION |
| CEN ISO/TR 25107:2006 | Non-destructive testing - Guidelines for NDT training syllabuses (ISO/TR 25107:2006) |
| PREN 13068-3 : DRAFT 99 | NON DESTRUCTIVE TESTING - RADIOSCOPIC TESTING - PART 3: GENERAL PRINCIPLES OF RADIOSCOPIC TESTING OF METALLIC MATERIALS BY X- AND GAMMA RAYS |
| S.R. CR 13935:2000 | NON-DESTRUCTIVE TESTING - GENERIC NDE DATA FORMAT MODEL |
| ASTM E 1165:2012 | Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
| 18/30338016 DC | BS ISO 20890-6. In-service inspections for primary coolant circuit components of light water reactors Part 6. Radiographic testing |
| 17/30361506 DC : 0 | BS EN ISO 20769-2 - NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AN DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: DOUBLE WALL RADIOGRAPHIC INSPECTION |
| 18/30372517 DC : 0 | BS EN 60336 ED.5.0 - MEDICAL ELECTRICAL EQUIPMENT - X-RAY TUBE ASSEMBLIES FOR MEDICAL DIAGNOSIS - CHARACTERISTICS OF FOCAL SPOTS |
| I.S. EN 16407-1:2014 | NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 1: TANGENTIAL RADIOGRAPHIC INSPECTION |
| UNI CEN ISO/TR 25107 : 2012 | NON-DESTRUCTIVE TESTING - GUIDELINES FOR NDT TRAINING SYLLABUSES |
| ASTM E 2033 : 2017 : REDLINE | Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
| I.S. CEN ISO TR 25107:2006 | NON-DESTRUCTIVE TESTING - GUIDELINES FOR NDT TRAINING SYLLABUSES |
| ISO 5579:2013 | Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
| UNE-EN ISO 5579:2014 | Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013) |
| EN 16407-2:2014 | Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection |
| EN ISO 5579:2013 | Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013) |
| EN 16407-1:2014 | Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection |
| 00/103131 DC : DRAFT APR 2000 | PREN 13474-2 - GLASS IN BUILDING - DESIGN OF GLASS PANES - PART 2: DESIGN FOR UNIFORMLY DISTRIBUTED LOADS |
| PD CR 13935:2000 | Non-destructive testing. Generic NDE data format model |
| UNI EN 16407-1 : 2014 | NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 1: TANGENTIAL RADIOGRAPHIC INSPECTION |
| PD CEN ISO/TR 25107:2006 | Non-destructive testing. Guidelines for NDT training syllabuses |
| ISO/TR 25107:2006 | Non-destructive testing Guidelines for NDT training syllabuses |
| CR 13935:2000 | Non-destructive testing - Generic NDE data format model |
| EN 13068-3:2001 | Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays |
| EN 584-1:2006 | Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography |
| EN 12543-1:1999 | Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method |
| EN 462-5:1996 | Non-destructive testing - Image quality of radiographs - Part 5: Image quality indicators (duplex wire type), determination of image unsharpness value |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.