EN 12594:2014
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Bitumen and bituminous binders - Preparation of test samples
Withdrawn date
31-05-2015
Published date
05-11-2014
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Reagents and materials
6 Apparatus
7 Procedure for sample preparation
8 Test report
This European Standard specifies a method for preparing samples of bituminous binders in order to test their properties.WARNING - Use of this European Standard can involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to identify the hazards and assess the risks involved in performing this test method and to implement sufficient control measures to protect individual operators (and the environment). This includes appropriate safety and health practices and determination of the applicability of regulatory limitations prior to use.
| Committee |
CEN/TC 336
|
| DevelopmentNote |
Supersedes PREN 12594. (11/2014)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| PN EN 12594 : 2014 | Identical |
| NF EN 12594 : 2014 | Identical |
| I.S. EN 12594:2014 | Identical |
| SN 670504 : 2015 | Identical |
| NBN EN 12594 : 2014 | Identical |
| IP 461 : 2007 | Identical |
| UNE-EN 12594:2015 | Identical |
| NEN EN 12594 : 2014 | Identical |
| NS EN 12594 : 2014 | Identical |
| BS EN 12594:2014 | Identical |
| DIN EN 12594:2015-01 | Identical |
| BS 2000-461(2014) : 2014 | Identical |
| SN EN 12594 : 2015 | Identical |
| UNI EN 12594 : 2015 | Identical |
| BS 2000-519(2016) : 2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| UNI EN 1431 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| BS 2000-493(2011) : 2011 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| 13/30255322 DC : 0 | BS EN 12593 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FRAASS BREAKING POINT |
| BS 2000-460.3(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| UNE-CEN/TS 15963:2010 EX | Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen |
| BS 2000-546(2006) : 2006 | BITUMEN AND BITUMINOUS BINDERS - DYNAMIC VISCOSITY OF BITUMINOUS EMULSIONS, CUT-BACK AND FLUXED BITUMINOUS BINDERS - ROTATING SPINDLE VISCOMETER METHOD |
| 08/30189593 DC : 0 | BS EN 12846-1 [BS 2000-484] - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 1: BITUMINOUS EMULSIONS |
| BS EN 13302:2010, BS 2000-505:2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF BITUMINOUS BINDER USING A ROTATING SPINDLE APPARATUS |
| 05/30138353 DC : DRAFT AUG 2005 | EN 15323 - BITUMEN AND BITUMINOUS BINDERS - ACCELERATED LONG-TERM AGEING CONDITIONING BY THE ROTATING CYLINDER METHOD (RCAT) |
| I.S. EN 16345:2012 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME OF BITUMINOUS EMULSIONS USING THE REDWOOD NO. 2 VISCOMETER |
| 05/30138267 DC : DRAFT AUG 2005 | EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| NF EN 13702 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN BY CONE AND PLATE METHOD |
| I.S. EN 12846:2002 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME OF BITUMEN EMULSIONS BY THE EFFLUX VISCOMETER |
| 13/30255319 DC : 0 | BS EN 12607-2 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| I.S. EN 13074:2002 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMEN EMULSIONS BY EVAPORATION |
| I.S. EN 15322:2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| I.S. EN 14895:2006 | BITUMEN AND BITUMINOUS BINDERS - STABILISATION OF BINDER FROM BITUMINOUS EMULSIONS OR FROM CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| BS 2000-292(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMEN EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
| 03/314555 DC : DRAFT OCT 2003 | EN 14770 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF COMPLEX SHEAR MODULUS AND PHASE ANGLE - DYNAMIC SHEAR RHEOMETER (DSR) |
| IP 292 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PARTICLE POLARITY OF BITUMINOUS EMULSIONS |
| 13/30255310 DC : 0 | BS EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| I.S. EN 16849:2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMINOUS EMULSIONS - METHOD USING A DRYING BALANCE |
| PD CEN/TS 16346:2012 | Bituminous binders. Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate |
| DIN EN 15626:2016-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
| BS EN 16849:2016 | Bitumen and bituminous binders. Determination of water content in bituminous emulsions. Method using a drying balance |
| 08/30189590 DC : 0 | BS EN 13074-1 [BS 2000-493] - BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMEN BY EVAPORATION |
| 05/30138270 DC : DRAFT AUG 2005 | EN 12593 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FRAASS BREAKING POINT |
| UNE-EN 13924-1:2016 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| 08/30189584 DC : 0 | BS EN 13074-2 [BS 2000-542] - BITUMEN AND BITUMINOUS BINDERS - STABILISATION OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMEN AFTER RECOVERY |
| 09/30209685 DC : 0 | BS EN 13358 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE DISTILLATION CHARACTERISTICS OF CUT-BACK AND FLUXED BITUMINOUS BINDERS MADE WITH MINERAL FLUXES |
| 00/106660 DC : DRAFT OCT 2000 | PREN 13924 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| 07/30165260 DC : 0 | BS EN 1430 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PARTICLE POLARITY OF BITUMEN EMULSIONS |
| 05/30138288 DC : DRAFT AUG 2005 | EN 12607-1 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| BS 2000-58(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| BS 2000-505(2010) : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF BITUMINOUS BINDER USING A ROTATING SPINDLE APPARATUS |
| PREN 12607-2 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| PREN 12607-1 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| S.R. CEN/TS 16346:2012 | BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR AND IMMEDIATE ADHESIVITY OF CATIONIC BITUMINOUS EMULSIONS WITH 2/4 MM AGGREGATE |
| UNE-EN 12846-1:2011 | Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions |
| BS 2000-518(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-518: BITUMEN AND BITUMINOUS BINDERS - VISUALISATION OF POLYMER DISPERSION IN POLYMER MODIFIED BITUMEN |
| BS 2000-49(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| PREN 13075-1 : DRAFT 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 1: DETERMINATION OF BREAKING VALUE OF CATIONIC BITUMINOUS EMULSIONS, MINERAL FILLER METHOD |
| IP 525 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE DISTILLATION CHARACTERISTICS OF CUT-BACK AND FLUXED BITUMINOUS BINDERS MADE WITH MINERAL FLUXES |
| IP 459-1 : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
| BS 2000-575(2009) : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
| BS 2000-49(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| BS 2000-542(2011) : 2011 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 2: STABILISATION AFTER RECOVERY BY EVAPORATION |
| NF EN 13074-1 : 2011 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| BS 2000-521(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-521: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMEN EMULSIONS BY WATER IMMERSION TEST - AGGREGATE METHOD |
| BS 2000-536(2012) : 2012 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF COMPLEX SHEAR MODULUS AND PHASE ANGLE - DYNAMIC SHEAR RHEOMETER (DSR) |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| DIN EN 12849:2009-07 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS |
| DIN EN 13587:2010-10 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| DIN EN 13301:2010-06 | Bitumen and bituminous binders - Determination of staining tendency of bitumen |
| DIN EN 1427:2015-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| DIN EN 13632:2010-11 | Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen |
| BS EN 1427:2015 | Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method |
| DIN EN 14769:2012-08 | Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) |
| BS EN 15323:2007 | Bitumen and bituminous binders. Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT) |
| BS EN 13074:2002 | Methods of test for petroleum and its products. Petroleum products. Bitumen and bituminous binders. Recovery of binder from bitumen emulsions by evaporation |
| UNE-EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| BS EN 12697-3 : 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| UNE-EN 1429:2013 | Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| BS EN 12591:2009 | Bitumen and bituminous binders. Specifications for paving grade bitumens |
| I.S. EN 12606-2:2000 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 2: METHOD BY EXTRACTION |
| EN 12846:2002 | Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer |
| EN 13614:2011 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
| CEN/TS 15963:2014 | Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen |
| EN 12592:2014 | Bitumen and bituminous binders - Determination of solubility |
| EN 12846-1:2011 | Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions |
| EN 12595:2014 | Bitumen and bituminous binders - Determination of kinematic viscosity |
| EN 12607-3:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 3: RFT method |
| DIN EN 13702-1:2004-03 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN - PART 1: CONE AND PLATE METHOD |
| DIN EN 14895:2006-06 | BITUMEN AND BITUMINOUS BINDERS - STABILISATION OF BINDER FROM BITUMINOUS EMULSIONS OR FROM CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| EN 13303:2017 | Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen |
| CEN/TS 15324:2008 | Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode |
| EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| EN 12607-1:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method |
| EN 13075-2:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions |
| CEN/TS 15325:2008 | Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode |
| DIN EN 13075-2:2017-02 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 2: DETERMINATION OF FINES MIXING TIME OF CATIONIC BITUMINOUS EMULSIONS |
| EN 12848:2009 | Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions |
| EN 13587:2016 | Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method |
| EN 12850:2009 | Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions |
| EN 12606-1:2015 | Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation |
| EN 12596:2014 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| EN 12274-7:2005 | Slurry surfacing - Test methods - Part 7: Shaking abrasion test |
| DIN EN 14896:2006-11 | BITUMEN AND BITUMINOUS BINDERS - DYNAMIC VISCOSITY OF BITUMINOUS EMULSIONS, CUT-BACK AND FLUXED BITUMINOUS BINDERS - ROTATING SPINDLE VISCOMETER METHOD |
| BS 2000-485(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMEN EMULSIONS |
| 05/30138357 DC : 0 | EN 15324 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EQUIVISCOUS TEMPERATURE BASED ON LOW SHEAR VISCOSITY USING A DYNAMIC SHEAR RHEOMETER IN LOW FREQUENCY OSCILLATION MODE |
| BS EN 16345:2012 | Bitumen and bituminous binders. Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer |
| BS EN 13924-2:2014 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Multigrade paving grade bitumens |
| 13/30267139 DC : 0 | BS EN 12596 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY BY VACUUM CAPILLARY |
| BS 2000-506(2009) : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE LOSS IN MASS AFTER HEATING OF INDUSTRIAL BITUMEN |
| BS 2000-460.1(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - RFTOT METHOD |
| BS EN 13702:2010 | Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen by cone and plate method |
| UNE-EN 15626:2016 | Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method |
| BS 2000-533(2012) : 2012 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FLEXURAL CREEP STIFFNESS - BENDING BEAM RHEOMETER (BBR) |
| I.S. EN 12607-1:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| I.S. EN 13702-2:2004 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN - PART 2: COAXIAL CYLINDERS METHOD |
| PREN 12592 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY |
| I.S. EN 12846-2:2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 2: CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| DIN EN 15322:2013-07 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| BS 2000-520(2008) : 2008 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF MODIFIED BITUMEN BY THE FORCE DUCTILITY METHOD |
| 08/30189596 DC : 0 | BS EN 12846-2 [BS 2000-502] - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 2: CUT-BACK AND FLUXED BITUMINOUS BINDER |
| S.R. CEN TS 15324:2008 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EQUIVISCOUS TEMPERATURE BASED ON LOW SHEAR VISCOSITY USING A DYNAMIC SHEAR RHEOMETER IN LOW FREQUENCY OSCILLATION MODE |
| DIN EN 12846-2:2011-05 | Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders |
| BS EN 12846-2:2011 | Bitumen and bituminous binders. Determination of efflux time by the efflux viscometer Cut-back and fluxed bituminous binders |
| 05/30138264 DC : DRAFT AUG 2005 | EN 12592 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY |
| IP 575 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
| UNI EN 12846-2 : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 2: CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| PREN 1426 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| 16/30326275 DC : 0 | BS EN 13302 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF BITUMINOUS BINDER USING A ROTATING SPINDLE APPARATUS |
| 05/30138363 DC : DRAFT AUG 2005 | EN 15326 - BITUMEN AND BITUMINOUS BINDERS - MEASUREMENT OF DENSITY AND SPECIFIC GRAVITY - CAPILLARY-STOPPERED PYKNOMETER METHOD |
| 01/105972 DC : DRAFT JULY 2001 | BS EN 14023 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR POLYMER MODIFIED BITUMENS |
| BS EN 16659:2015 | Bitumen and Bituminous Binders. Multiple Stress Creep and Recovery Test (MSCRT) |
| 09/30210257 DC : 0 | BS EN 13614 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| 16/30326281 DC : 0 | BS EN 13399 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STORAGE STABILITY OF MODIFIED BITUMEN |
| UNI CEN/TS 15324 : 2008 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EQUIVISCOUS TEMPERATURE BASED ON LOW SHEAR VISCOSITY USING A DYNAMIC SHEAR RHEOMETER IN LOW FREQUENCY OSCILLATION MODE |
| BS EN 13924-1:2015 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Hard paving grade bitumens |
| DD CEN/TS 15324:2008 | Bitumen and bituminous binders. Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode |
| 07/30168449 DC : DRAFT SEP 2007 | BS EN 13589 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF MODIFIED BITUMEN BY THE FORCE DUCTILITY METHOD |
| 05/30138276 DC : DRAFT AUG 2005 | EN 12595 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
| BS 2000-49(2015) : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| BS 2000-520(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-520: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF MODIFIED BITUMEN BY THE FORCE DUCTILITY METHOD |
| UNI EN 13358 : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE DISTILLATION CHARACTERISTICS OF CUT-BACK AND FLUXED BITUMINOUS BINDERS MADE WITH MINERAL FLUXES |
| DIN EN 12846-1:2011-05 | Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions |
| UNI EN 13924-2 : 2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| UNI EN 13614 : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| BS 2000-535(2012) : 2012 | BITUMEN AND BITUMINOUS BINDERS - ACCELERATED LONG-TERM AGEING CONDITIONING BY A PRESSURE AGEING VESSEL (PAV) |
| IP 542 : 2006 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 2: STABILISATION AFTER RECOVERY BY EVAPORATION |
| BS 2000-514(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-514: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN - PART 2: COAXIAL CYLINDERS METHOD |
| BS 2000-525(2010) : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE DISTILLATION CHARACTERISTICS OF CUT-BACK AND FLUXED BITUMINOUS BINDERS MADE WITH MINERAL FLUXES |
| DIN EN 13589:2008-06 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF MODIFIED BITUMEN BY THE FORCE DUCTILITY METHOD |
| UNI EN 13074-2 : 2011 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 2: STABILISATION AFTER RECOVERY BY EVAPORATION |
| PREN 12595 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
| EN 1431:2018 | Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation |
| BS 2000-460-2(2014) : 2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| IP 518 : 2010 | BITUMEN AND BITUMOUS BINDERS - VISUALISATION OF POLYMER DISPERSION IN POLYMER MODIFIED BITUMEN |
| BS 2000-91(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMEN EMULSIONS AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| DIN EN 13302:2016-09 (Draft) | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF BITUMINOUS BINDER USING A ROTATING SPINDLE APPARATUS |
| EN 13398:2017 | Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen |
| NF EN 13358 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE DISTILLATION CHARACTERISTICS OF CUT-BACK AND FLUXED BITUMINOUS BINDERS MADE WITH MINERAL FLUXES |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| I.S. EN 13399:2017 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STORAGE STABILITY OF MODIFIED BITUMEN |
| EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
| DIN EN 13075-2:2015-04 (Draft) | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 2: DETERMINATION OF FINES MIXING TIME OF CATIONIC BITUMINOUS EMULSIONS |
| DIN EN 12593:2015-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FRAASS BREAKING POINT |
| DIN EN 12848:2009-07 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS |
| DIN EN 1428:2012-03 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMINOUS EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
| DIN EN 12850:2009-07 | Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions |
| DIN EN 1430:2009-07 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PARTICLE POLARITY OF BITUMINOUS EMULSIONS |
| DIN EN 12596:2015-01 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| DIN EN 12847:2009-07 | Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions |
| DIN EN 1429:2013-08 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| DIN EN 14771:2012-08 | Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR) |
| DIN EN 12697-3:2013-08 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| BS EN 1430:2009 | Bitumen and bituminous binders. Determination of particle polarity of bituminous emulsions |
| UNE-EN 12593:2015 | Bitumen and bituminous binders - Determination of the Fraass breaking point |
| BS EN 15326 : 2007 | BITUMEN AND BITUMINOUS BINDERS - MEASUREMENT OF DENSITY AND SPECIFIC GRAVITY - CAPILLARY-STOPPERED PYKNOMETER METHOD |
| BS EN 12848:2009 | Bitumen and bituminous binders. Determination of mixing stability with cement of bituminous emulsions |
| UNE-EN 1428:2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
| UNE-EN 14769:2012 | Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) |
| BS EN 14770:2012 | Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic Shear Rheometer (DSR) |
| BS EN 12607-3:2014 | Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air RFT method |
| I.S. EN 14023:2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
| I.S. EN 13301:2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STAINING TENDENCY OF BITUMEN |
| I.S. EN 13075-2:2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 2: DETERMINATION OF FINES MIXING TIME OF CATIONIC BITUMINOUS EMULSIONS |
| I.S. EN 12848:2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS |
| I.S. EN 13075-1:2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 1: DETERMINATION OF BREAKING VALUE OF CATIONIC BITUMINOUS EMULSIONS, MINERAL FILLER METHOD |
| I.S. EN 1427:2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| I.S. EN 15326:2007 | BITUMEN AND BITUMINOUS BINDERS - MEASUREMENT OF DENSITY AND SPECIFIC GRAVITY - CAPILLARY-STOPPERED PYKNOMETER METHOD |
| I.S. EN 1428:2012 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMINOUS EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
| DIN EN 13587:2017-02 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| I.S. EN 12596:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY BY VACUUM CAPILLARY |
| I.S. EN 12593:2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FRAASS BREAKING POINT |
| I.S. EN 1426:2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| I.S. EN 12607-2:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| I.S. EN 1430:2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PARTICLE POLARITY OF BITUMINOUS EMULSIONS |
| I.S. EN 12849:2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS |
| I.S. EN 14770:2012 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF COMPLEX SHEAR MODULUS AND PHASE ANGLE - DYNAMIC SHEAR RHEOMETER (DSR) |
| I.S. EN 13632:2010 | BITUMEN AND BITUMINOUS BINDERS - VISUALISATION OF POLYMER DISPERSION IN POLYMER MODIFIED BITUMEN |
| I.S. EN 12591:2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| I.S. EN 14769:2012 | BITUMEN AND BITUMINOUS BINDERS - ACCELERATED LONG-TERM AGEING CONDITIONING BY A PRESSURE AGEING VESSEL (PAV) |
| I.S. EN 12607-3:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| I.S. EN 12592:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY |
| I.S. EN 13587:2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| I.S. EN 14771:2012 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FLEXURAL CREEP STIFFNESS - BENDING BEAM RHEOMETER (BBR) |
| I.S. EN 13614:2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| I.S. EN 13808:2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| I.S. EN 12847:2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS |
| I.S. EN 12606-1:2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
| DIN EN 13074-1:2011-05 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| I.S. EN 13303:2017 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE LOSS IN MASS AFTER HEATING OF INDUSTRIAL BITUMEN |
| DIN EN 13074:2002-11 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMEN EMULSIONS BY EVAPORATION |
| DIN EN 13074-2:2011-05 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 2: STABILISATION AFTER RECOVERY BY EVAPORATION |
| I.S. EN 1429:2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| I.S. EN 12850:2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PH VALUE OF BITUMINOUS EMULSIONS |
| DIN EN 12591:2009-08 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| I.S. EN 12697-4:2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 4: BITUMEN RECOVERY: FRACTIONATING COLUMN |
| IP 533 : 2005 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FLEXURAL CREEP STIFFNESS - BENDING BEAM RHEOMETER (BBR) |
| 05/30138273 DC : DRAFT AUG 2005 | EN 1427 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| BS EN 13074-1:2011 | Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders Recovery by evaporation |
| 03/314556 DC : DRAFT OCT 2003 | EN 14771 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FLEXURAL CREEP STIFFNESS - BENDING BEAM RHEOMETER (BBR) |
| EN 13399:2017 | Bitumen and bituminous binders - Determination of storage stability of modified bitumen |
| I.S. EN 1431:2018 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| I.S. EN 12595:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
| 16/30300582 DC : 0 | BS EN 13588 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF COHESION OF BITUMINOUS BINDERS WITH PENDULUM TEST |
| 13/30255328 DC : 0 | BS EN 12607-1 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| 03/314554 DC : DRAFT OCT 2003 | EN 14769 - BITUMEN AND BITUMINOUS BINDERS - ACCELERATED LONG-TERM AGEING - PRESSURE AGEING VESSEL (PAV) |
| BS EN 13074-2:2011 | Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders Stabilisation after recovery by evaporation |
| 07/30168446 DC : DRAFT SEP 2007 | BS EN 13588 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF COHESION OF BITUMINOUS BINDERS WITH PENDULUM TEST |
| DIN EN 13924-2:2014-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| 13/30255303 DC : 0 | BS EN 12592 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY |
| 13/30267142 DC : 0 | BS EN 12606-1 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
| 11/30250575 DC : 0 | BS EN 1429 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| NF EN 12846-1 : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 1: BITUMINOUS EMULSIONS |
| BS 2000-519(2010) : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| DD CEN/TS 15325:2008 | Bitumen and bituminous binders. Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode |
| DIN EN 13924-1:2016-02 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| PD CEN/TS 15963:2014 | Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen |
| BS 2000-292(2009) : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PARTICLE POLARITY OF BITUMINOUS EMULSIONS |
| BS 2000-291(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMEN EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
| 11/30247867 DC : 0 | BS EN 13924-2 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL BITUMEN - PART 2: MULTIGRADE BITUMENOUS BINDERS |
| UNE-EN 12846-2:2011 | Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders |
| BS 2000-521(2011) : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| BS EN 12846-1:2011 | Bitumen and bituminous binders. Determination of efflux time by the efflux viscometer Bituminous emulsions |
| 00/101067 DC : DRAFT JAN 2000 | BS EN 13808 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMEN EMULSIONS |
| UNE-EN 16659:2016 | Bitumen and Bituminous Binders - Multiple Stress Creep and Recovery Test (MSCRT) |
| IP 460-1 : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| BS EN 15322:2013 | Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders |
| IP 536 : 2005 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF COMPLEX SHEAR MODULUS AND PHASE ANGLE - DYNAMIC SHEAR RHEOMETER (DSR) |
| UNI EN 12846-1 : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 1: BITUMINOUS EMULSIONS |
| PREN 12606-1 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
| BS 2000-519(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-519: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| BS 2000-58(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOFTENING POINT - RING AND BALL METHOD |
| BS 2000-460.2(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| BS EN 15626:2009 | Bitumen and bituminous binders. Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test. Aggregate method |
| PREN 13399 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STORAGE STABILITY OF MODIFIED BITUMEN |
| I.S. EN 13398:2017 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE ELASTIC RECOVERY OF MODIFIED BITUMEN |
| UNI EN 13074-1 : 2011 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| BS 2000-517(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-517: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STORAGE STABILITY OF MODIFIED BITUMEN |
| BS 2000-504(2010) : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STAINING TENDENCY OF BITUMEN |
| BS 2000-522(2008) : 2008 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF COHESION OF BITUMINOUS BINDERS WITH PENDULUM TEST |
| UNI EN 13302 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF BITUMINOUS BINDER USING A ROTATING SPINDLE APPARATUS |
| UNI EN 13589 : 2008 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF MODIFIED BITUMEN BY THE FORCE DUCTILITY METHOD |
| UNE-EN 13302:2010 | Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus |
| I.S. EN 13358:2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE DISTILLATION CHARACTERISTICS OF CUT-BACK AND FLUXED BITUMINOUS BINDERS MADE WITH MINERAL FLUXES |
| EN 13074-2:2011 | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation |
| IP 459-2 : 2000 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 2: METHOD BY EXTRACTION |
| IP 504 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STAINING TENDENCY OF BITUMENS |
| BS 2000-291(2011) : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMINOUS EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
| UNI CEN/TS 16346 : 2013 | BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR AND IMMEDIATE ADHESIVITY OF CATIONIC BITUMINOUS EMULSIONS WITH 2/4 MM AGGREGATE |
| BS 2000-459.1(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
| PREN 12593 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FRAASS BREAKING POINT |
| NF EN 12846-2 : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 2: CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| UNE-EN 13074-2:2011 | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation |
| UNE-EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| DIN EN 12592:2015-01 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY |
| DIN EN 1426:2015-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| DIN EN 13808:2013-07 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| DIN EN 12274-7:2005-08 | SLURRY SURFACING - PART 7: SHAKING ABRASION TEST |
| DIN EN 12607-3:2015-01 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| DIN EN 15326:2009-08 | BITUMEN AND BITUMINOUS BINDERS - MEASUREMENT OF DENSITY AND SPECIFIC GRAVITY - CAPILLARY-STOPPERED PYKNOMETER METHOD |
| UNE-EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| BS EN 14769:2012 | Bitumen and bituminous binders. Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) |
| BS EN 12595:2014 | Bitumen and bituminous binders. Determination of kinematic viscosity |
| UNE-EN 13614:2011 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
| DIN EN 12697-4:2015-09 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
| EN 13808:2013 | Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
| EN 1430:2009 | Bitumen and bituminous binders - Determination of particle polarity of bituminous emulsions |
| UNI EN 13632 : 2010 | BITUMEN AND BITUMINOUS BINDERS - VISUALISATION OF POLYMER DISPERSION IN POLYMER MODIFIED BITUMEN |
| UNI EN 12847 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS |
| UNI EN 12607-2 : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| UNI EN 12848 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS |
| UNI EN 14770 : 2012 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF COMPLEX SHEAR MODULUS AND PHASE ANGLE - DYNAMIC SHEAR RHEOMETER (DSR) |
| UNI EN 16345 : 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME OF BITUMINOUS EMULSIONS USING THE REDWOOD NO. 2 VISCOMETER |
| UNI EN 14771 : 2012 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FLEXURAL CREEP STIFFNESS - BENDING BEAM RHEOMETER (BBR) |
| UNI EN 12849 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS |
| UNI EN 13808 : 2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| UNI EN 12274-7 : 2005 | SLURRY SURFACING - TEST METHODS - PART 7: SHAKING ABRASION TEST |
| UNI EN 14769 : 2013 | BITUMEN AND BITUMINOUS BINDERS - ACCELERATED LONG-TERM AGEING CONDITIONING BY A PRESSURE AGEING VESSEL (PAV) |
| UNI EN 12596 : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY BY VACUUM CAPILLARY |
| UNI EN 1430 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PARTICLE POLARITY OF BITUMINOUS EMULSIONS |
| UNI EN 15326 : 2009 | BITUMEN AND BITUMINOUS BINDERS - MEASUREMENT OF DENSITY AND SPECIFIC GRAVITY - CAPILLARY-STOPPERED PYKNOMETER METHOD |
| UNI EN 14023 : 2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
| UNI EN 1429 : 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| UNI EN 1428 : 2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
| UNI EN 12850 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PH VALUE OF BITUMINOUS EMULSIONS |
| IP 486 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS |
| UNI EN 12697-3 : 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| UNI EN 12607-3 : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| UNI EN 12607-1 : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| UNI EN 12595 : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
| UNI EN 12592 : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY |
| UNI EN 12591 : 2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| UNI EN 13301 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STAINING TENDENCY OF BITUMEN |
| 16/30334728 DC : 0 | BS EN 1431 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| 17/30362722 DC : 0 | BS EN 13074-2 - BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 2: STABILISATION AFTER RECOVERY BY EVAPORATION |
| 04/30111159 DC : DRAFT MARCH 2004 | EN 14895 - BITUMEN AND BITUMINOUS BINDERS - STABILISATION OF BINDER FROM BITUMINOUS EMULSION OR FROM CUT-BACK AND FLUXED BITUMEN |
| UNI EN 15322 : 2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| 04/30111185 DC : DRAFT MARCH 2004 | EN 14896 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF BITUMINOUS EMULSIONS - ROTATING SPINDLE VISCOMETER METHOD |
| 05/30138360 DC : 0 | EN 15325 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ZERO SHEAR VISCOSITY (ZSV) USING A SHEAR STRESS RHEOMETER IN CREEP MODE |
| I.S. EN 12846-1:2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 1: BITUMINOUS EMULSIONS |
| I.S. EN 13702-1:2004 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN - PART 1: CONE AND PLATE METHOD |
| 13/30255300 DC : 0 | BS EN 1427 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHODBS EN 1427 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| I.S. EN 15626:2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
| 05/30138291 DC : DRAFT AUG 2005 | EN 12607-2 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| BS 2000-460.1(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| 07/30165257 DC : 0 | BS EN 1429 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMEN EMULSIONS, AND DETERMINATION OF STORAGE ABILITY BY SIEVING |
| DIN EN 16659:2016-03 | Bitumen and bituminous binders - Multiple Stress Creep and Recovery Test (MSCRT) |
| PREN 1427 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| I.S. EN 13074-2:2011 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 2: STABILISATION AFTER RECOVERY BY EVAPORATION |
| BS 2000-536(2005) : 2005 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF COMPLEX SHEAR MODULUS AND PHASE ANGLE - DYNAMIC SHEAR RHEOMETER (DSR) |
| BS 2000-319(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
| DD CEN/TS 15963:2010 | Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen |
| BS 2000-517(2010) : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STORAGE STABILITY OF MODIFIED BITUMEN |
| BS 2000-502(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-502: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE EFFLUX TIME OF PETROLEUM CUT-BACK AND FLUXED BITUMENS |
| 16/30326272 DC : 0 | BS EN 13303 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE LOSS IN MASS AFTER HEATING OF INDUSTRIAL BITUMEN |
| 05/30138285 DC : DRAFT AUG 2005 | EN 12606-1 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
| 05/30138294 DC : DRAFT AUG 2005 | EN 12607-3 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| IP 584 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FRACTURE TOUGHNESS TEMPERATURE BY A THREE POINT BENDING TEST ON A NOTCHED SPECIMEN |
| IP 522 : 2008 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF COHESION OF BITUMINOUS BINDERS WITH PENDULUM TEST |
| BS 2000-502(2011) : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 2: CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| 04/30117724 DC : DRAFT AUG 2004 | EN 14023 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK SPECIFICATION FOR POLYMER MODIFIED BITUMENS |
| 08/30181480 DC : DRAFT MAY 2008 | BS EN 13301 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STAINING TENDENCY OF BITUMEN |
| 15/30318316 DC : 0 | BS EN 16849 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMINOUS EMULSIONS - METHOD USING A DRYING BALANCE |
| 15/30318319 DC : 0 | BS EN 13075-1 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 1: DETERMINATION OF BREAKING VALUE OF CATIONIC BITUMINOUS EMULSIONS, MINERAL FILLER METHOD |
| BS EN 13398:2017 | Bitumen and bituminous binders. Determination of the elastic recovery of modified bitumen |
| UNI CEN/TS 15963 : 2014 | Bitumen and bituminous binders - Determination of the breaking strength temperature by bending test on three points of a notched specimen |
| ONORM EN 13589 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF MODIFIED BITUMEN BY THE FORCE DUCTILITY METHOD |
| IP 516 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE ELASTIC RECOVERY OF MODIFIED BITUMEN |
| PREN 1429 : DRAFT 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| BS 2000-504(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STAINING TENDENCY OF BITUMEN |
| BS 2000-91(2009) : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| BS 2000-518(2010) : 2010 | BITUMEN AND BITUMINOUS BINDERS - VISUALISATION OF POLYMER DISPERSION IN POLYMER MODIFIED BITUMEN |
| S.R. CEN TS 15325:2008 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ZERO-SHEAR VISCOSITY (ZSV) USING A SHEAR STRESS RHEOMETER IN CREEP MODE |
| IP 551 : 2007 | BITUMEN AND BITUMINOUS BINDERS - ACCELERATED LONG-TERM AGEING/CONDITIONING BY THE ROTATING CYLINDER METHOD (RCAT) |
| IP 520 : 2008 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF MODIFIED BITUMEN BY THE FORCE DUCTILITY METHOD |
| DIN EN 13358:2010-11 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE DISTILLATION CHARACTERISTICS OF CUT-BACK AND FLUXED BITUMINOUS BINDERS MADE WITH MINERAL FLUXES |
| IP 505 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF VISCOSITY OF BITUMEN USING A ROTATING SPINDLE APPARATUS |
| 16/30326269 DC : 0 | BS EN 13702 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF BITUMINOUS BINDER BY CONE AND PLATE METHOD - CONE AND PLATE METHOD |
| NF EN 13302 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF BITUMINOUS BINDER USING A ROTATING SPINDLE APPARATUS |
| NF EN 13074-2 : 2011 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 2: STABILIZATION AFTER RECOVERY BY EVAPORATION |
| DIN EN 13702:2016-02 (Draft) | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN BY CONE AND PLATE METHOD |
| BS 2000-494(2012) : 2012 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 1: DETERMINATION OF BREAKING VALUE OF CATIONIC BITUMINOUS EMULSIONS, MINERAL FILLER METHOD |
| BS 2000-549(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - MEASUREMENT OF DENSITY AND SPECIFIC GRAVITY - CAPILLARY-STOPPERED PYKNOMETER METHOD |
| EN 13702:2010 | Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method |
| EN 13589:2008 | Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method |
| EN 13074-1:2011 | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation |
| NF EN 13614 : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| DIN EN 12595:2015-01 | Bitumen and bituminous binders - Determination of kinematic viscosity |
| DIN EN 14023:2013-04 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| DIN EN 12607-1:2015-01 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| DIN EN 12606-1:2015-11 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
| DIN EN 12607-2:2015-01 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| BS EN 12274-7:2005 | Slurry surfacing. Test methods Shaking abrasion test |
| BS EN 14023:2010 | Bitumen and bituminous binders. Specification framework for polymer modified bitumens |
| UNE-EN 16345:2012 | Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer |
| BS EN 12606-2:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content Method by extraction |
| BS EN 13702-1:2003 | Methods of test for petroleum and its products. BS 2000-513. Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen Cone and plate method |
| BS EN 14896:2006 | Bitumen and bituminous binders. Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders. Rotating spindle viscometer method |
| DIN EN 15323:2007-07 | Bitumen and bituminous binders - Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT) |
| BS EN 1428:2012 | Bitumen and bituminous binders. Determination of water content in bituminous emulsions. Azeotropic distillation method |
| BS EN 12593:2015 | Bitumen and bituminous binders. Determination of the Fraass breaking point |
| BS EN 12592:2014 | Bitumen and bituminous binders. Determination of solubility |
| BS EN 14771:2012 | Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending Beam Rheometer (BBR) |
| UNE-EN 12607-1:2015 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method |
| BS EN 12607-1:2014 | Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air RTFOT method |
| BS EN 12846:2002 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of efflux time of bitumen emulsions by the efflux viscometer method |
| BS EN 13303:2017 | Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumen |
| BS EN 13357:2002 | Methods of test for petroleum and its products. BS 2000-502. Bitumen and bituminous binders. Determination of the efflux time of petroleum cut-back and fluxed bitumens |
| UNE-EN 12606-1:2015 | Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation |
| UNE-EN 12607-3:2015 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 3: RFT method |
| UNE-EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
| UNE-EN 13301:2010 | Bitumen and bituminous binders - Determination of staining tendency of bitumen |
| UNE-EN 12595:2015 | Bitumen and bituminous binders - Determination of kinematic viscosity |
| UNE-EN 12596:2015 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| BS EN 1429:2013 | Bitumen and bituminous binders. Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| BS EN 12850:2009 | Bitumen and bituminous binders. Determination of the pH value of bituminous emulsions |
| BS EN 14895:2006 | Bitumen and bituminous binders. Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders |
| BS EN 13358:2010 | Bitumen and bituminous binders. Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes |
| UNE-EN 13075-2:2017 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions |
| BS EN 13587:2016 | Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method |
| BS EN 13075-1:2016 | Bitumen and bituminous binders. Determination of breaking behaviour Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| BS EN 1426:2015 | Bitumen and bituminous binders. Determination of needle penetration |
| BS EN 12697-4:2005 | Bituminous mixtures. Test methods for hot mix asphalt Bitumen recovery. Fractionating column |
| UNE-EN 13808:2013 | Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
| BS EN 12847:2002 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of settling tendency of bitumen emulsions |
| UNE-EN 14771:2012 | Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR) |
| UNE-EN 12592:2015 | Bitumen and bituminous binders - Determination of solubility |
| BS EN 13702-2:2003 | Methods of test for petroleum and its products. BS 2000-514. Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen Coaxial cylinders method |
| BS EN 13632:2010 | Bitumen and bituminous binders. Visualisation of polymer dispersion in polymer modified bitumen |
| UNE-EN 13075-1:2017 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| UNE-EN 14770:2012 | Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR) |
| BS EN 13614:2004 | Methods of test for petroleum and its products. BS 2000-521: Bitumen and bituminous binders. Determination of adhesivity of bitumen emulsions by water immersion test. Aggregate method |
| UNE-EN 12607-2:2015 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 2: TFOT method |
| IP 488 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PH VALUE OF BITUMINOUS EMULSIONS |
| EN 14895:2006 | Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders |
| EN 14896:2006 | Bitumen and bituminous binders - Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders - Rotating spindle viscometer method |
| EN 1428:2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
| IP 319 : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
| EN 14771:2012 | Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR) |
| EN 15626:2016 | Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method |
| EN 13632:2010 | Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen |
| IP 487 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 14769:2012 | Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) |
| EN 16659:2015 | Bitumen and Bituminous Binders - Multiple Stress Creep and Recovery Test (MSCRT) |
| EN 16345:2012 | Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer |
| EN 16849:2016 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance |
| EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| EN 13702-1 : 2003 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN - PART 1: CONE AND PLATE METHOD |
| EN 15326:2007+A1:2009 | Bitumen and bituminous binders - Measurement of density and specific gravity - Capillary-stoppered pyknometer method |
| EN 13702-2 : 2003 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN - PART 2: COAXIAL CYLINDERS METHOD |
| EN 13588:2017 | Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test |
| EN 1429:2013 | Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| EN 15322:2013 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| IP 485 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS |
| EN 15323:2007 | Bitumen and bituminous binders - Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT) |
| EN 14770:2012 | Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR) |
| EN 13924-2:2014 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens |
| PREN 13398 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE ELASTIC RECOVERY OF MODIFIED BITUMEN |
| DIN EN 1431:2016-03 (Draft) | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| 13/30267134 DC : 0 | BS EN 16659 - BITUMEN AND BITUMINOUS BINDERS - MULTIPLE STRESS CREEP AND RECOVERY TEST (MSCRT) |
| PREN 12607-3 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| PREN 13588 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF COHESION OF BITUMINOUS BINDERS WITH PENDULUM TEST |
| I.S. EN 14896:2006 | BITUMEN AND BITUMINOUS BINDERS - DYNAMIC VISCOSITY OF BITUMINOUS EMULSIONS, CUT-BACK AND FLUXED BITUMINOUS BINDERS - ROTATING SPINDLE VISCOMETER METHOD |
| I.S. EN 13924:2006 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| BS 2000-58(2015) : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| I.S. EN 13357:2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE EFFLUX TIME OF PETROLEUM CUT-BACK AND FLUXED BITUMENS |
| IP 517 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STORAGE STABILITY OF MODIFIED BITUMEN |
| IP 91 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| 13/30255325 DC : 0 | BS EN 12595 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
| 18/30368684 DC : 0 | BS EN 12697-55 - BITUMINOUS MIXTURES - TEST METHODS - PART 55: ORGANOLEPTIC ASSESSMENT OF COMPATIBILITY OF CONSTITUENT MATERIALS OF A MIXTURE WITH BITUMEN EMULSION |
| BS 2000-513(2010) : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN BY CONE AND PLATE METHOD |
| UNI EN 13702 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN BY CONE AND PLATE METHOD |
| DIN EN 16345:2012-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME OF BITUMINOUS EMULSIONS USING THE REDWOOD NO. 2 VISCOMETER |
| 15/30318322 DC : 0 | BS EN 13075-2 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 2: DETERMINATION OF FINES MIXING TIME OF CATIONIC BITUMINOUS EMULSIONS |
| I.S. EN 13924-2:2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| 08/30181483 DC : DRAFT MAY 2008 | BS EN 13302 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF VISCOSITY OF BITUMEN USING A ROTATING SPINDLE APPARATUS |
| 07/30165263 DC : 0 | BS EN 1431 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RECOVERED BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| UNE-EN 16849:2017 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance |
| BS 2000-506(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-506: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE LOSS IN MASS AFTER HEATING OF INDUSTRIAL BITUMENS |
| BS 2000-525(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-525: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE DISTILLATION CHARACTERISTICS OF PETROLEUM CUT-BACK BITUMEN PRODUCTS |
| BS 2000-513(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-513: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN - PART 1: CONE AND PLATE METHOD |
| BS 2000-484(2011) : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 1: BITUMINOUS EMULSIONS |
| BS 2000-506(2017) : 2017 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE LOSS IN MASS AFTER HEATING OF INDUSTRIAL BITUMEN |
| BS 2000-516(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-516: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE ELASTIC RECOVERY OF MODIFIED BITUMEN |
| BS 2000-533(2005) : 2005 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FLEXURAL CREEP STIFFNESS - BENDING BEAM RHEOMETER (BBR) |
| I.S. EN 16659:2015 | BITUMEN AND BITUMINOUS BINDERS - MULTIPLE STRESS CREEP AND RECOVERY TEST (MSCRT) |
| PREN 13702 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF BITUMINOUS BINDER BY CONE AND PLATE METHOD - CONE AND PLATE METHOD |
| BS 2000-522(2004) : 2004 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF COHESION OF BITUMINOUS BINDERS WITH PENDULUM TEST |
| 16/30326278 DC : 0 | BS EN 13398 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE ELASTIC RECOVERY OF MODIFIED BITUMEN |
| 13/30255313 DC : 0 | BS EN 12607-3 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| 13/30255316 DC : 0 | BS EN 13924-1 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| PREN 12596 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY BY VACUUM CAPILLARY |
| 07/30160848 DC : 0 | BS EN 15626 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
| BS 2000-516(2010) : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE ELASTIC RECOVERY OF MODIFIED BITUMEN |
| BS EN 13589:2008 | Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method |
| PREN 13302 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF BITUMINOUS BINDER USING A ROTATING SPINDLE APPARATUS |
| BS 2000-460-1(2014) : 2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| PREN 12591 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| BS 2000-505(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF VISCOSITY OF BITUMEN USING A ROTATING SPINDLE APPARATUS |
| I.S. EN 13302:2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF BITUMINOUS BINDER USING A ROTATING SPINDLE APPARATUS |
| BS 2000-584(2010) : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FRACTURE TOUGHNESS TEMPERATURE BY A THREE POINT BENDING TEST ON A NOTCHED SPECIMEN |
| BS 2000-551(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - ACCELERATED LONG-TERM AGEING/CONDITIONING BY THE ROTATING CYLINDER METHOD (RCAT) |
| BS 2000-535(2005) : 2005 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - ACCELERATED LONG-TERM AGEING CONDITIONING BY A PRESSURE AGEING VESSEL (PAV) |
| BS 2000-542(2006) : 2006 | BITUMEN AND BITUMINOUS BINDERS - STABILISATION OF BINDER FROM BITUMINOUS EMULSIONS OR FROM CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| I.S. EN 13588:2017 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF COHESION OF BITUMINOUS BINDERS WITH PENDULUM TEST |
| BS 2000-459.1(2015) : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
| IP 502 : 2003 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 2: CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| I.S. EN 13924-1:2015 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| BS 2000-460-3(2014) : 2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| BS EN 13399:2017 | Bitumen and bituminous binders. Determination of storage stability of modified bitumen |
| IP 458 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| 17/30362725 DC : 0 | BS EN 13074-1 - BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| IP 513 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN BY CONE AND PLATE METHOD |
| UNE-EN 13074-1:2011 | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation |
| IP 549 : 2009 | BITUMEN AND BITUMINOUS BINDERS - MEASUREMENT OF DENSITY AND SPECIFIC GRAVITY - CAPILLARY-STOPPERED PYKNOMETER METHOD |
| UNE-EN 15322:2014 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| PREN 13075-2 : DRAFT 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 2: DETERMINATION OF FINES MIXING TIME OF CATIONIC BITUMINOUS EMULSIONS |
| PREN 13614 : DRAFT 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| PREN 12697-55 : DRAFT 2018 | BITUMINOUS MIXTURES - TEST METHODS - PART 55: ORGANOLEPTIC ASSESSMENT OF COMPATIBILITY OF CONSTITUENT MATERIALS OF A MIXTURE WITH BITUMEN EMULSION |
| I.S. EN 13074-1:2011 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| S.R. CEN/TS 15963:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FRACTURE TOUGHNESS TEMPERATURE BY A THREE POINT BENDING TEST ON A NOTCHED SPECIMEN |
| I.S. EN 13702:2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN BY CONE AND PLATE METHOD |
| I.S. EN 13589:2008 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF MODIFIED BITUMEN BY THE FORCE DUCTILITY METHOD |
| DIN EN 13614:2011-06 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
| BS EN 12596:2014 | Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary |
| BS EN 12607-2:2014 | Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air TFOT method |
| BS EN 12849:2009 | Bitumen and bituminous binders. Determination of penetration power of bituminous emulsions |
| BS EN 13301:2010 | Bitumen and bituminous binders. Determination of staining tendency of bitumen |
| BS EN 12606-1:2015 | Bitumen and bituminous binders. Determination of the paraffin wax content Method by distillation |
| BS EN 13075-2:2016 | Bitumen and bituminous binders. Determination of breaking behaviour Determination of fines mixing time of cationic bituminous emulsions |
| BS EN 13924:2006 | Bitumen and bituminous binders. Specifications for hard paving grade bitumens |
| EN 12607-2:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 2: TFOT method |
| EN 13357:2002 | Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens |
| DIN EN 13702:2010-11 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN BY CONE AND PLATE METHOD |
| CEN/TS 16346:2012 | Bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate |
| EN 13074:2002 | Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation |
| EN 13358:2010 | Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes |
| EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
| EN 12593:2015 | Bitumen and bituminous binders - Determination of the Fraass breaking point |
| EN 12847:2009 | Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions |
| EN 12606-2:1999 | Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method of extraction |
| DIN EN 14770:2012-08 | Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR) |
| EN 13075-1:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| EN 12849:2009 | Bitumen and bituminous binders - Determination of penetration power of bituminous emulsions |
| DIN EN 13924:2006-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| DIN EN 13702-2:2004-03 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN - PART 2: COAXIAL CYLINDERS METHOD |
| EN 12846-2:2011 | Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders |
| EN 13301:2010 | Bitumen and bituminous binders - Determination of staining tendency of bitumen |
| EN 12697-2:2015 | Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution |
| EN 13074-1:2011 | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation |
| EN 14769:2012 | Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) |
| EN 12697-1 : 2012 COR 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| EN 1425:2012 | Bitumen and bituminous binders - Characterization of perceptible properties |
| EN 1429:2013 | Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| EN 12847:2009 | Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions |
| EN 12607-2:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 2: TFOT method |
| EN 58:2012 | Bitumen and bituminous binders - Sampling bituminous binders |
| EN 12607-3:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 3: RFT method |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| EN 12607-1:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 13074-2:2011 | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation |
| EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.