EN 12811-2:2004
Current
Current
The latest, up-to-date edition.
Temporary works equipment - Part 2: Information on materials
Published date
11-02-2004
Publisher
Sorry this product is not available in your region.
1 Scope
2 Normative references
3 General
3.1 Selection of materials
3.2 Characteristic values
3.3 Inspection documents
3.4 Effects of fabrication
4 Steel
4.1 General
4.2 Dimensions, mass and tolerance
4.3 Fracture toughness
4.4 Steel grades in EN 10142
5 Cast iron
5.1 General
5.2 Prototype testing
5.3 Inspection document
6 Aluminium alloys
6.1 General
6.2 Dimensions, mass and tolerance
6.3 Heat affected zones
6.4 Inspection document
7 Timber and timber based materials
7.1 General
7.2 Solid timber and glued laminated timber
7.2.1 General
7.2.2 Characteristic values
7.2.3 Dimensions, mass and tolerance
7.3 Wood-based materials (plywood, particleboard,
fibreboard)
7.3.1 General
8 Protection against corrosion and deterioration
8.1 Ferrous metal products
8.2 Aluminium alloys
8.3 Plywood for scaffold decks
9 Welding
Annex A (informative) Information taken from other
material and design standards
Bibliography
This draft European Standard only deals with commonly used steel, aluminium alloys, cast iron, timber and timber based materials. It also covers requirements for welding and for limiting corrosion and other deterioration
| Committee |
CEN/TC 53
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 12811-2:2005 | Identical |
| NEN EN 12811-2 : 2004 | Identical |
| NS EN 12811-2 : 1ED 2004 | Identical |
| NBN EN 12811-2 : 2004 | Identical |
| SN EN 12811-2 : 2004 | Identical |
| BS EN 12811-2:2004 | Identical |
| UNI EN 12811-2 : 2004 | Identical |
| I.S. EN 12811-2:2004 | Identical |
| NF EN 12811-2 : 2004 | Identical |
| PN EN 12811-2 : 2008 | Identical |
| DIN EN 12811-2:2004-04 | Identical |
| DIN EN 16508:2016-02 | TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
| I.S. EN 74-1:2005 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES |
| 12/30248282 DC : 0 | BS EN 12811-4 - TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN |
| 07/19978687 DC : 0 | BS EN 74-2 - COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| I.S. EN 16704-2-2:2016 | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS |
| UNI EN 74-2 : 2009 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| UNE-EN 74-2:2010 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| DIN EN 12813:2004-09 | Temporary works equipment - Loadbearing towers of prefabricated components - Particular methods of structural design |
| BS EN 12813:2004 | Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design |
| EN 12813:2004 | Temporary works equipment - Load bearing towers of prefabricated components - Particular methods of structural design |
| DIN EN 16031:2012-09 | ADJUSTABLE TELESCOPIC ALUMINUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS |
| BS EN 16031:2012 | Adjustable telescopic aluminium props. Product specifications, design and assessment by calculation and tests |
| 14/30285802 DC : 0 | BS EN 16704-2-2 - RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS |
| I.S. EN 12811-4:2013 | TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN |
| I.S. EN 74-3:2007 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 3: PLAIN BASE PLATES AND SPIGOT PINS - REQUIREMENTS AND TEST PROCEDURES |
| I.S. EN 16508:2015 | TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
| UNE-EN 13374:2013 | Temporary edge protection systems - Product specification - Test methods |
| DIN EN 74-1:2005-12 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures |
| I.S. EN 1004:2005 | MOBILE ACCESS AND WORKING TOWERS MADE OF PREFABRICATED ELEMENTS - MATERIALS, DIMENSIONS, DESIGN LOADS, SAFETY AND PERFORMANCE REQUIREMENTS |
| DIN EN 13374:2013-07 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| UNI EN 12811-4 : 2014 | TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN |
| 12/30272145 DC : 0 | BS EN 16508 - TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
| BS EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Special couplers. Requirements and test procedures |
| BS EN 74-3:2007 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Plain base plates and spigot pins. Requirements and test procedures |
| UNE-EN 14653-1:2012 | Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications |
| BS EN 16704-2-2:2016 | Railway applications. Track. Safety protection on the track during work Common solutions and technology. Requirements for barriers |
| I.S. EN 16031:2012 | ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS |
| EN 13374:2013 | Temporary edge protection systems - Product specification - Test methods |
| I.S. EN 74-2:2008 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| UNE-EN 16704-2-2:2017 | Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers |
| UNI EN 74-3 : 2007 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 3: PLAIN BASE PLATES AND SPIGOT PINS - REQUIREMENTS AND TEST PROCEDURES |
| DIN EN 1004:2005-03 | Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements |
| EN 16704-2-2:2016 | Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers |
| UNI EN 13374 : 2013 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| ONORM EN 74-2 : 2009 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| ONORM EN 74-1 : 2006 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES |
| DIN 4420-3:2006-01 | Service and working scaffolds - Part 3: Selected types of scaffolding constructions and their basic versions |
| DIN EN 74-3:2007-07 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures; German version EN 74-3:2007 |
| DIN EN 16704-2-2:2014-07 (Draft) | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS |
| 11/30250535 DC : DRAFT DEC 2011 | BS EN 13374 - TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| 05/19978685 DC : 0 | BS EN 74-3 - COUPLERS, SPIGOT PINS AND BASE PLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 3: PLAIN BASE PLATES AND SPIGOT PINS - REQUIREMENTS AND TEST METHODS |
| BS EN 12811-4:2013 | Temporary works equipment Protection fans for scaffolds. Performance requirements and product design |
| UNI EN 16031 : 2012 | ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS |
| I.S. EN 13374:2013 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| DIN EN 14653-2:2005-07 | MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 2: ASSESSMENT BY CALCULATION OR TEST |
| DIN EN 14653-1:2005-07 | MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 1: PRODUCT SPECIFICATIONS |
| BS EN 74-1:2005 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Part 1: Couplers for tubes. Requirements and test procedures |
| BS EN 14653-2:2005 | Manually operated hydraulic shoring systems for groundwork support Assessment by calculation or test |
| BS EN 13374 : 2013 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| EN 14653-2:2005 | Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test |
| EN 74-3:2007 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures |
| EN 16508:2015 | Temporary works equipment - Encapsulation constructions - Performance requirements and general design |
| EN 14653-1:2005 | Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications |
| EN 16031:2012 | Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests |
| EN 74-1:2005 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures |
| 09/30211977 DC : 0 | BS EN 16031 - ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS |
| BS EN 16508:2015 | Temporary works equipment. Encapsulation constructions. Performance requirements and general design |
| DIN EN 12811-4:2014-03 | TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN |
| DIN EN 74-2:2009-01 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| UNE-EN 12811-4:2015 | Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design |
| UNE-EN 14653-2:2012 | Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test |
| UNE-EN 16031:2013 | Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests |
| BS EN 14653-1:2005 | Manually operated hydraulic shoring systems for groundwork support Product specifications |
| BS EN 1004:2004 | Mobile access and working towers made of prefabricated elements. Materials, dimensions, design loads, safety and performance requirements |
| EN 12811-4:2013 | Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design |
| DIN EN 16704-2-2:2017-03 | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS |
| EN 1004:2004 | Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements |
| EN 10113-2 : 1993 | HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS |
| EN 1194:1999 | Timber structures - Glued laminated timber - Strength classes and determination of characteristic values |
| EN 729-2 : 1994 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - COMPREHENSIVE QUALITY REQUIREMENTS |
| EN 10147 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS |
| EN 39:2001 | Loose steel tubes for tube and coupler scaffold - Technical delivery conditions |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN 485-2:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| EN 10142 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 719 : 1994 | WELDING COORDINATION - TASKS AND RESPONSIBILITIES |
| EN 1562:2012 | Founding - Malleable cast irons |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| EN 390:1994 | Glued laminated timber - Sizes - Permissible deviations |
| EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| ENV 1999-1-1 : 1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| EN 287-2:1992/A1:1997 | APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS |
| EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 336:2013 | Structural timber - Sizes, permitted deviations |
| EN 729-1 : 1994 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - GUIDELINES FOR SELECTION AND USE |
| EN 386:2001 | Glued laminated timber - Performance requirements and minimum production requirements |
| EN 1179:2003 | Zinc an zinc alloys - Primary zinc |
| EN 408:2010+A1:2012 | Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| EN 338:2016 | Structural timber - Strength classes |
| EN 10296-1:2003 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| ENV 1993-1-3:1996/AC:1997 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - GENERAL RULES - SUPPLEMENTARY RULES FOR COLD FORMED THIN GAUGE MEMBERS AND SHEETING |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| EN 729-3 : 1994 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - STANDARD QUALITY REQUIREMENTS |
| EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
| EN 1193 : 1997 | TIMBER STRUCTURES - STRUCTURAL TIMBER AND GLUED LAMINATED TIMBER - DETERMINATION OF SHEAR STRENGTH AND MECHANICAL PROPERTIES PERPENDICULAR TO THE GRAIN |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.