• Shopping Cart
    There are no items in your cart

EN 1288-1:2000

Current

Current

The latest, up-to-date edition.

Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass

Published date

21-06-2000

Sorry this product is not available in your region.

Foreword
1 Scope
2 Normative references
3 Definitions
4 Symbols
5 Factors to be taken into account when testing glass
      5.1 Glass as a material
      5.2 Bending stress and bending strength
      5.3 Type of glass
      5.4 Orientation of the specimens
      5.5 Number of specimens in a sample
6 Explanations of the test methods
      6.1 Coaxial double ring test for large test surface
             areas
      6.2 Test with specimen supported at two points
             (four point bending)
      6.3 Coaxial double ring test for small test surface
             areas
7 Range of application of the test methods
      7.1 General limitations
      7.2 Limitations to EN 1288-2
      7.3 Limitations to EN 1288-3
      7.4 Limitations to EN 1288-4
      7.5 Limitations to EN 1288-5
8 Calibration of the testing machines
9 Recommendations for safe use of test equipment
Annex A (informative) Bibliography

This standard specifies the determination of the bending strength of monolithic glass for use in buildings. The testing of insulating units or laminated glass is excluded from this standard. This standard describes: - considerations to be taken into account when testing glass, - explanations of the reasons for designing different test methods, - limitations of the test methods, and gives pointers to safety requirements for the personnel operating the test equipment.

Committee
CEN/TC 129
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

07/30046996 DC : DRAFT AUG 2007 BS ISO 1288-4 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 4: TESTING OF CHANNEL SHAPED GLASS
17/30360670 DC : DRAFT SEP 2017 BS EN 1748-2-1 - GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - GLASS CERAMICS - PART 2-1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
ISO 11336-1:2012 Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design criteria, materials, framing and testing of independent glazed openings
BS ISO 11336-1:2012 Large yachts. Strength, weathertightness and watertightness of glazed openings Design criteria, materials, framing and testing of independent glazed openings
17/30356436 DC : 0 BS EN 16612 - GLASS IN BUILDING - DETERMINATION OF THE LATERAL LOAD RESISTANCE OF GLASS PANES BY CALCULATION
DIN EN 572-1:2016-06 GLASS IN BUILDING - BASIC SODA-LIME SILICATE GLASS PRODUCTS - PART 1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
BS EN 572-1 : 2012 GLASS IN BUILDING - BASIC SODALIME SILICATE GLASS PRODUCTS - PART 1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
EN 1288-2:2000 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
PREN 1748-1-1 : DRAFT 2017 GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE FLOAT GLASS - PART 1-1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
PREN 1748-2-1 : DRAFT 2017 GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - GLASS CERAMICS - PART 2-1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
17/30359847 DC : 0 BS EN 14178-1 - GLASS IN BUILDING - BASIC ALKALINE EARTH SILICATE GLASS PRODUCTS - PART 1: FLOAT GLASS
BS EN 1288-5:2000 Glass in building. Determination of the bending strength of glass Coaxial double ring test on flat specimens with small test surface areas
I.S. EN 572-1:2012 GLASS IN BUILDING - BASIC SODA-LIME SILICATE GLASS PRODUCTS - PART 1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
I.S. EN 15681-1:2016 GLASS IN BUILDING - BASIC ALUMINO SILICATE GLASS PRODUCTS - PART 1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
07/30046986 DC : DRAFT AUG 2007 BS ISO 1288-2 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 2: COAXIAL DOUBLE-RING REST ON FLAT SPECIMENS WITH LARGE TEST SURFACE AREAS
DIN EN 15681-1:2016-06 Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties
DIN EN 1288-2:2000-09 GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 2: COAXIAL DOUBLE RING TEST ON FLAT SPECIMENS WITH LARGE TEST SURFACE AREAS
BS EN 15681-1:2016 Glass in building. Basic alumino silicate glass products Definitions and general physical and mechanical properties
07/30046990 DC : DRAFT AUG 2007 BS ISO 1288-3 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 3: TEST WITH SPECIMEN SUPPORTED AT TWO POINTS (FOUR POINT BENDING)
10/30193723 DC : 0 BS ISO 11336-1 - LARGE YACHTS STRENGTH, WEATHERTIGHTNESS AND WATERTIGHTNESS OF GLAZED OPENINGS - PART 1: DESIGN CRITERIA, MATERIALS, FRAMING AND TESTING OF INDEPENDENT GLAZED OPENINGS
PREN 14178-1 : DRAFT 2017 GLASS IN BUILDING - BASIC ALKALINE EARTH SILICATE GLASS PRODUCTS - PART 1: FLOAT GLASS
DIN EN 1288-5:2000-09 GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 5: COAXIAL DOUBLE RING TEST ON FLAT SPECIMENS WITH SMALL TEST SURFACE AREAS
DIN EN 1288-3:2000-09 GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 3: TEST WITH SPECIMEN SUPPORTED AT TWO POINTS (FOUR POINT BENDING)
BS EN 1288-2:2000 Glass in building. Determination of the bending strength of glass Coaxial double ring test on flat specimens with large test surface areas
BS EN 1288-3:2000 Glass in building. Determination of the bending strength of glass Test with specimen supported at two points (four point bending)
BS EN 1288-4:2000 Glass in building. Determination of the bending strength of glass Testing of channel shaped glass
EN 15681-1:2016 Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties
EN 572-1:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
07/30047007 DC : DRAFT AUG 2007 BS ISO 1288-5 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 5: COAXIAL DOUBLE-RING TEST ON FLAT SPECIMENS WITH SMALL OR MEDIUM TEST SURFACE AREAS
PREN 16612 : DRAFT 2017 GLASS IN BUILDING - DETERMINATION OF THE LATERAL LOAD RESISTANCE OF GLASS PANES BY CALCULATION
17/30360102 DC : 0 BS EN 1748-1-1 - GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE FLOAT GLASS - PART 1-1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
UNE-EN 15681-1:2017 Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties

EN 572-3:2012 Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass
EN 12337-1:2000 Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description
PREN 13024-1 : DRAFT 2011 GLASS IN BUILDING - THERMALLY TOUGHENED BOROSILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
EN 572-7:2012 Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass
EN 1863-1:2011 Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
EN 1748-2 : 1997 GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - GLASS CERAMICS
EN 572-6:2012 Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass
EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
EN 572-2:2012 Glass in building - Basic soda lime silicate glass products - Part 2: Float glass
EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
EN 12150-1:2015 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
EN 572-4:2012 Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass
EN 1748-1 : 1997 GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE GLASSES
EN 572-1:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
EN 572-5:2012 Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass
EN 1288-2:2000 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
EN ISO 12543-1:2011 Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.