EN ISO 3580:2017
|
Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification (ISO 3580:2017) |
ISO 14341:2010
|
Welding consumables Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification |
EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
ISO 26304:2011
|
Welding consumables Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels Classification |
ISO 3581:2016
|
Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification |
ISO 14343:2017
|
Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification |
ISO/IEC 17021:2011
|
Conformity assessment Requirements for bodies providing audit and certification of management systems |
ISO 24598:2012
|
Welding consumables Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels Classification |
ISO 17633:2010
|
Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification |
EN 10216-5:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
EN 10213:2007+A1:2016
|
Steel castings for pressure purposes |
EN ISO 6892-1:2016
|
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
EN 10028-3:2017
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
EN 10273:2016
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
EN 10228-2:2016
|
Non-destructive testing of steel forgings - Part 2: Penetrant testing |
ISO 544:2011
|
Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markings |
EN ISO 10893-10:2011
|
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) |
EN 10164:2004
|
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
EN 1759-1:2004
|
Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
EN ISO 8495:2013
|
Metallic materials - Tube - Ring-expanding test (ISO 8495:2013) |
ISO/TR 15608:2017
|
Welding Guidelines for a metallic materials grouping system |
EN 1503-2:2000
|
Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards |
EN ISO 14171:2016
|
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016) |
ISO 2566-2:1984
|
Steel Conversion of elongation values Part 2: Austenitic steels |
ISO 2560:2009
|
Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification |
EN 10314:2016
|
Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 12952-3:2011
|
Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler |
ISO 18276:2017
|
Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification |
EN 1503-1:2000
|
Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
EN 10254:1999
|
Steel closed die forgings - General technical delivery conditions |
EN 12536:2000
|
Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification |
EN ISO 16834:2012
|
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012) |
EN ISO 2566-1:1999
|
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
ISO 14344:2010
|
Welding consumables — Procurement of filler materials and fluxes |
EN ISO 18276:2017
|
Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017) |
EN 10216-2:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
ISO 3580:2017
|
Welding consumables — Covered electrodes for manual metal arc welding of creep-resisting steels — Classification |
EN 764-5:2014
|
Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
EN ISO 21952:2012
|
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012) |
EN 12952-12:2003
|
Water-tube boilers and auxiliary installations - Part 12: Requirements for boiler feedwater and boiler water quality |
EN 12952-7:2012
|
Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler |
EN 10028-2:2017
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
EN 10228-1:1999
|
Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
EN 10253-4:2008/AC:2009
|
BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
EN ISO 17634:2015
|
Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015) |
EN ISO 24598:2012
|
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2012) |
EN 10028-7:2016
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels |
ISO 148-1:2016
|
Metallic materials — Charpy pendulum impact test — Part 1: Test method |
EN 10308:2001
|
Non destructive testing - Ultrasonic testing of steel bars |
EN 10217-7:2014
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
ISO 21952:2012
|
Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels — Classification |
ISO 6303:1981
|
Pressure vessel steels not included in ISO 2604, Parts 1 to 6 — Derivation of long-time stress rupture properties |
ISO 14171:2016
|
Welding consumables Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels Classification |
ISO 16834:2012
|
Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification |
EN 10222-3:2017
|
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
EN ISO 14341:2011
|
Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010) |
EN 10222-5:2017
|
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
EN 10228-3:2016
|
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
EN 10021:2006
|
General technical delivery conditions for steel products |
EN ISO 2560:2009
|
Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
ISO 2566-1:1984
|
Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
EN 10217-2:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
EN ISO 2566-2:1999
|
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984) |
ISO 17632:2015
|
Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification |
EN 10222-4:2017
|
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
EN ISO 14343:2017
|
Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017) |
EN 10222-2:2017
|
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
EN 760:1996
|
Welding consumables - Fluxes for submerged arc welding - Classification |
ISO 8495:2013
|
Metallic materials Tube Ring-expanding test |
EN 10204:2004
|
Metallic products - Types of inspection documents |
CEN ISO/TR 15608:2017
|
Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017) |
EN ISO 17632:2015
|
Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015) |
ISO 17634:2015
|
Welding consumables Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels Classification |
EN ISO 6892-2:2011
|
Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
EN 1600:1997
|
Welding consumables - Covered electrodes for manual arc welding of stainless and heat resisting steels - Classification |
ISO 9001:2015
|
Quality management systems — Requirements |
EN 10217-3:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
EN 12074:2000
|
Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes |
ISO 6892-2:2011
|
Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
EN ISO 148-1:2016
|
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
EN ISO 636:2017
|
Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017) |
EN ISO/IEC 17021:2011
|
Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021:2011) |
EN 10160:1999
|
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
ISO 10893-10:2011
|
Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
ISO 636:2017
|
Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification |
ISO 18275:2011
|
Welding consumables Covered electrodes for manual metal arc welding of high-strength steels Classification |
EN 764-4:2014
|
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
EN 12952-5:2011
|
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
EN 10253-2:2007
|
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
EN 757:1997
|
Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification |
EN 10217-5:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
EN 13479:2017
|
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
EN ISO 14344:2010
|
Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2010) |
EN 10216-3:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
EN 12952-6:2011
|
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |