• NF EN 12952-2 : 2011

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES

    Available format(s): 

    Superseded date:  09-01-2023

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Association Francaise de Normalisation

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Avant-propos
    1 Domaine d'application
    2 Références normatives
    3 Exigences générales
      3.1 Sélection des matériaux en fonction des conditions
          de service
      3.2 Sélection des matériaux en fonction de la fabrication
      3.3 Spécification de matériau
      3.4 Prise en compte des propriétés particulières des
          matériaux
      3.5 Contenu de la spécification du matériau
      3.6 Documents de conformité et d'inspection des matériaux
    4 Matériaux utilisés pour les parties sous pression
      4.1 Matériaux couverts par des normes européennes
          harmonisées de matériaux pour équipements sous pression
      4.2 Matériaux couverts par une approbation européenne de
          matériaux pour équipements sous pression - Exigences
          techniques
      4.3 Matériaux avec évaluations particulières des matériaux
    5 Matériaux utilisés pour les parties non soumises à la pression
    6 Documentation d'inspection
    Annexe A (normative) - Matériaux couverts par des normes
                              européennes de matériaux
    Annexe B (normative) - Détermination des valeurs de résistance
                              à la rupture par fluage pour les
                              nouveaux matériaux
    Annexe C (normative) - Chaudières de récupération chimiques
    Annexe ZA (informative) - Articles de la présente Norme européenne
                              concernant les exigences essentielles ou
                              d'autres dispositions de la Directive
                              <<Équipements sous pression>> (DESP)
    Bibliographie

    Abstract - (Show below) - (Hide below)

    Gives the requirements for the following materials for use in pressure parts of water-tube boilers and for parts welded on pressure parts: plates; wrought seamless tubes; electrically welded tubes; submerged, plasma and TIG arc-welded tubes; forgings; castings; rolled bars; welding consumables; fasteners; seamless composite tubes.

    General Product Information - (Show below) - (Hide below)

    Development Note Indice de classement: E32-110-2. (06/2002) PR NF EN 12952-2 December 2008. (12/2008)
    Document Type Standard
    Publisher Association Francaise de Normalisation
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    FD CR 12952-17 : 2004 FD WATER TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 17: GUIDELINE FOR THE INVOLVEMENT OF AN INSPECTION BODY INDEPENDENT OF THE MANUFACTURER

    Standards Referencing This Book - (Show below) - (Hide below)

    EN ISO 3580:2017 Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification (ISO 3580:2017)
    EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
    ISO 3581:2016 Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification
    EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
    EN 10213:2007+A1:2016 Steel castings for pressure purposes
    EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
    EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
    EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
    EN 10228-2:2016 Non-destructive testing of steel forgings - Part 2: Penetrant testing
    EN ISO 10893-10:2011 Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011)
    EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
    EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    EN ISO 8495:2013 Metallic materials - Tube - Ring-expanding test (ISO 8495:2013)
    EN 1503-2:2000 Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards
    EN ISO 14171:2016 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016)
    EN 10314:2016 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
    EN 12952-3:2011 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
    EN 1503-1:2000 Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
    EN 10254:1999 Steel closed die forgings - General technical delivery conditions
    EN 12536:2000 Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification
    EN ISO 16834:2012 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)
    EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
    EN ISO 18276:2017 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017)
    EN 10216-2:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
    EN 764-5:2014 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
    EN ISO 21952:2012 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012)
    EN 12952-12:2003 Water-tube boilers and auxiliary installations - Part 12: Requirements for boiler feedwater and boiler water quality
    EN 12952-7:2012 Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler
    EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
    EN 10228-1:1999 Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
    EN 10253-4:2008/AC:2009 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    EN ISO 17634:2015 Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015)
    EN ISO 24598:2012 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2012)
    EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
    EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
    EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
    ISO 6303:1981 Pressure vessel steels not included in ISO 2604, Parts 1 to 6 — Derivation of long-time stress rupture properties
    EN 10222-3:2017 Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
    EN ISO 14341:2011 Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010)
    EN 10222-5:2017 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
    EN 10228-3:2016 Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
    EN 10021:2006 General technical delivery conditions for steel products
    EN ISO 2560:2009 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009)
    EN 10217-2:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
    EN ISO 2566-2:1999 Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984)
    EN 10222-4:2017 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
    EN ISO 14343:2017 Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017)
    EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
    EN 760:1996 Welding consumables - Fluxes for submerged arc welding - Classification
    EN 10204:2004 Metallic products - Types of inspection documents
    CEN ISO/TR 15608:2017 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
    EN ISO 17632:2015 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015)
    EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
    EN 1600:1997 Welding consumables - Covered electrodes for manual arc welding of stainless and heat resisting steels - Classification
    EN 10217-3:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
    EN 12074:2000 Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
    EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
    EN ISO 636:2017 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017)
    EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
    ISO 18275:2011 Welding consumables Covered electrodes for manual metal arc welding of high-strength steels Classification
    EN 764-4:2014 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
    EN 12952-5:2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
    EN 10253-2:2007 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
    EN 757:1997 Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification
    EN 10217-5:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
    EN 13479:2017 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
    EN ISO 14344:2010 Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2010)
    EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
    1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
    EN 12952-6:2011 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective