EN 12972:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
Superseded date
12-07-2019
Superseded by
Published date
18-02-2015
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Inspections and tests
5 Procedures and documentation for inspections and tests
Annex A (informative) - Applicable items of tank
inspection - Survey Table
Annex B (informative) - Technical data for type approval
Annex C (informative) - Hydraulic pressure testing with
gases - hazards and precautions
Annex D (informative) - Certificate of initial, periodic and
intermediate inspection and exceptional check
Annex E (normative) - Tank plates for fixed tanks
(tank vehicles) and demountable tanks for the
transport of dangerous goods
Annex F (normative) - Tank plates for tank containers or
portable tanks for the transport of dangerous goods
Bibliography
This European Standard specifies testing, inspection and marking for the type approval, initial inspection, periodic inspection, intermediate inspection and exceptional check of metallic tanks (shell and equipment) of fixed tanks (tank vehicles), demountable tanks, rail tank wagons, portable tanks and tank containers for the transport of dangerous goods.This European Standard is not applicable to battery-vehicles and battery-wagons comprising cylinders, tubes, pressure drums, bundles of cylinders and multiple element gas containers (MEGCs), independent of whether the elements are receptacles or tanks.It is essential that the requirements of the applicable regulations for the transport of dangerous goods prevail in all cases over those of this standard.
| Committee |
CEN/TC 296
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN 12972 : 2015 | Identical |
| NS EN 12972 : 2015 | Identical |
| ÖNORM EN 12972:2018 | Identical |
| UNI EN 12972 : 2007 | Identical |
| DIN EN 12972:2015-04 | Identical |
| BS EN 12972:2018 | Identical |
| NEN EN 12972 : 2015 | Identical |
| BS EN 12972:2015 | Identical |
| UNE-EN 12972:2015 | Identical |
| NF EN 12972 : 2015 | Identical |
| I.S. EN 12972:2015 | Identical |
| NBN EN 12972 : 2015 | Identical |
| I.S. EN 12972:2018 | Identical |
| SN EN 12972 : 2015 | Identical |
| SN EN 12972:2018 | Identical |
| PN EN 12972 : 2015 | Identical |
| DS EN 12972 : 2015 | Identical |
| DS EN 12972:2018 | Identical |
| UNI EN 12972:2015 | Identical |
| 10/30234318 DC : DRAFT DEC 2010 | BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| 11/30243007 DC : 0 | BS EN 14564 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| 08/30184283 DC : DRAFT SEP 2008 | BS EN 12561-4 - RAILWAY APPLICATIONS - TANK WAGONS - PART 4: TOP DEVICES FOR TOP EMPTYING AND FILLING OF LIQUID PRODUCTS |
| 08/30184289 DC : DRAFT SEP 2008 | BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| 17/30363721 DC : 0 | BS EN 14564 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| DIN EN 12561-4:2011-10 | Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products |
| UNE-EN 12561-4:2012 | Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products |
| EN 12561-6:2011 | Railway applications - Tank wagons - Part 6: Manholes |
| 10/30234330 DC : DRAFT DEC 2010 | BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| I.S. CEN TR 15120:2005 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - GUIDANCE AND RECOMMENDATIONS FOR LOADING, TRANSPORT AND UNLOADING |
| 08/30184286 DC : DRAFT SEP 2008 | BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: TOP DEVICES FOR BOTTOM EMPTYING AND TOP FILLING OF LIQUID PRODUCTS |
| S.R. CEN/TR 15120:2013 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - GUIDANCE AND RECOMMENDATIONS FOR LOADING, TRANSPORT AND UNLOADING |
| BS EN 14564:2013 | Tanks for transport of dangerous goods. Terminology |
| BS EN 12561-8:2011 | Railway applications. Tank wagons Heating connections |
| I.S. EN 12561-4:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS |
| I.S. EN 12561-8:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 8: HEATING CONNECTIONS |
| I.S. EN 12561-2:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| I.S. EN 12561-6:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| UNI EN 12561-8 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 8: HEATING CONNECTIONS |
| CEN/TR 15120:2013 | Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading |
| 08/30184280 DC : DRAFT SEP 2008 | BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| PD CEN/TR 15120:2013 | Tanks for transport of dangerous goods. Guidance and recommendations for loading, transport and unloading |
| 08/30163745 DC : DRAFT SEP 2008 | BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| PREN 14564 : DRAFT 2017 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| UNI EN 14564 : 2013 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| 08/30184296 DC : DRAFT SEP 2008 | BS EN 12561-8 - RAILWAY APPLICATIONS - TANK WAGONS - PART 8: HEATING CONNECTIONS |
| I.S. EN 14564:2013 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| UNE-EN 12561-6:2012 | Railway applications - Tank wagons - Part 6: Manholes |
| EN 13094:2015 | Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
| I.S. EN 13094:2015 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
| UNI EN 12561-4 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING EMPTYING AND OF LIQUID PRODUCTS |
| EN 12561-4:2011 | Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products |
| UNI EN 12561-2 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| UNI EN 12561-6 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| 10/30234336 DC : DRAFT DEC 2010 | BS EN 12561-8 - RAILWAY APPLICATIONS - TANK WAGONS - PART 8: HEATING CONNECTIONS |
| 13/30247837 DC : 0 | BS EN 13094 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
| DIN EN 13094:2015-07 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
| BS EN 12561-2:2011 | Railway applications. Tank wagons Bottom emptying devices for liquid products including vapour return |
| UNE-EN 12561-2:2012 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
| UNE-EN 14564:2013 | Tanks for transport of dangerous goods - Terminology |
| UNE-EN 13094:2015 | Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
| BS EN 12561-4:2011 | Railway applications. Tank wagons Devices for top filling and emptying of liquid products |
| EN 12561-2:2011 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
| EN 14564:2013 | Tanks for transport of dangerous goods - Terminology |
| 10/30234324 DC : DRAFT DEC 2010 | BS EN 12561-4 - RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS |
| DIN EN 14564:2013-04 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| DIN EN 12561-8:2011-10 | Railway applications - Tank wagons - Part 8: Heating connections |
| DIN EN 12561-6:2011-10 | Railway applications - Tank wagons - Part 6: Manholes |
| DIN EN 12561-2:2011-10 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
| UNE-EN 12561-8:2012 | Railway applications - Tank wagons - Part 8: Heating connections |
| BS EN 12561-6:2011 | Railway applications. Tank wagons Manholes |
| BS EN 13094:2015 | Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction |
| EN 1432:1997 | Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions |
| ISO 9606-4:1999 | Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys |
| EN ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
| EN 12079-1:2006 | Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking |
| ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| EN 14025:2013+A1:2016 | Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction |
| ISO 14731:2006 | Welding coordination Tasks and responsibilities |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| EN ISO 9606-4:1999 | Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
| EN ISO 14732:2013 | Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
| EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
| ISO 1496-3:1995 | Series 1 freight containers Specification and testing Part 3: Tank containers for liquids, gases and pressurized dry bulk |
| EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
| UIC 591 : 3ED 2007 | ROLLER UNITS FOR HORIZONTAL TRANSSHIPMENT - TECHNICAL CONDITIONS GOVERNING THEIR USE IN INTERNATIONAL TRAFFIC |
| EN ISO 14731:2006 | Welding coordination - Tasks and responsibilities (ISO 14731:2006) |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| EN 13094:2015 | Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
| IMO IF200 : 2006 | INTERNATIONAL MARITIME DANGEROUS GOODS (IMDG) CODE |
| EN 837-2:1997 | Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| EN 837-3:1996 | Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
| UIC 592-4 : 3ED 2007 | SWAP BODIES FOR GRAB HANDLING AND SPREADER GRIPPING - TECHNICAL CONDITIONS |
| EN ISO 9606-3:1999 | Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) |
| ISO 9606-3:1999 | Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.