EN 13121-2:2003
Current
The latest, up-to-date edition.
GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance
08-10-2003
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Protective layers
5 Determination of partial design factor, A[2]
Annex A (normative) Determination of partial design
factor, A[2], in accordance with
media lists
Annex B (normative) Determination of partial design
factor, A[2], by service experience
Annex C (informative) Evaluation of partial design factor,
A[2], by testing in situ or by
laboratory testing
Annex Z (informative) Relationship between this European Standard
Annex ZA and the Essential requirements of EU Directive
97/23/EC (PED)
This European Standard gives requirements for chemical resistance of composite materials used for GRP tanks and vessels for storage or processing of fluids, for use above ground. The tanks or vessels may be factory made or site built, with or without lining.
| Committee |
CEN/TC 210
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 13121-2:2003 | Identical |
| SN EN 13121-2 : 2003 | Identical |
| UNE-EN 13121-2:2004 | Identical |
| NEN EN 13121-2 : 2003 | Identical |
| DIN EN 13121-2:2004-01 | Identical |
| PN EN 13121-2 : 2004 | Identical |
| NBN EN 13121-2 : 2003 | Identical |
| UNI EN 13121-2 : 2006 | Identical |
| NS EN 13121-2 : 1ED 2003 | Identical |
| NF EN 13121-2 : 2004 | Identical |
| I.S. EN 13121-2:2003 | Identical |
| I.S. EN 13121-3:2016 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| EEMUA 225 : 1920 | ABOVE GROUND PLASTIC TANKS - A GUIDE TO THEIR SPECIFICATION, INSTALLATION, COMMISSIONING, INSPECTION, MAINTENANCE, REPAIR AND DISPOSAL |
| PREN 13160-7 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| DIN EN 13923:2006-02 | Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing |
| EN 13160-7:2016 | Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets |
| EN 13121-3:2016 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| 14/30301266 DC : 0 | BS EN 13160-7 - LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| I.S. EN 13160-7:2016 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| DIN EN 13121-3:2016-10 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| BS EN 13121-3:2016 | GRP tanks and vessels for use above ground Design and workmanship |
| UNE-EN 13121-3:2017 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| UNE-EN 13160-7:2017 | Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets |
| 14/30298583 DC : 0 | BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| BS EN 13923:2005 | Filament-wound FRP pressure vessels. Materials, design, manufacturing and testing |
| BS EN 13160-7:2003 | Leak detection systems General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets |
| EN 13923:2005 | Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing |
| 04/30046221 DC : 0 | PREN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| EN 13121-1:2003 | GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions |
| ISO 4433-3:1997 | Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes |
| PREN 13121-3 : DRAFT 2014 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
| ISO 1172:1996 | Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
| ISO 4433-1:1997 | Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 1: Immersion test method |
| EN ISO 4599 : 1996 | PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - BENT STRIP METHOD |
| ISO 4433-2:1997 | Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 2: Polyolefin pipes |
| ISO 4599:1986 | Plastics Determination of resistance to environmental stress cracking (ESC) Bent strip method |
| ISO 14125:1998 | Fibre-reinforced plastic composites — Determination of flexural properties |
| EN ISO 6252 : 1997 | PLASTICS - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) - CONSTANT-TENSILE-STRESS METHOD |
| ISO 4433-4:1997 | Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 4: Poly(vinylidene fluoride) (PVDF) pipes |
| ISO 6252:1992 | Plastics Determination of environmental stress cracking (ESC) Constant-tensile-stress method |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.