I.S. EN 13121-3:2016
|
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
12/30265310 DC : 0
|
BS EN 124-5 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE FROM COMPOSITE MATERIALS |
I.S. EN 1013-2:1999
|
LIGHT TRANSMITTING PROFILED PLASTIC SHEETING FOR SINGLE SKIN ROOFING - PART 2: SPECIFIC REQUIREMENTS AND TEST METHODS FOR SHEETS OF GLASS FIBRE REINFORCED POLYESTER RESIN (GRP) |
BS EN ISO 12215-1:2000
|
Small craft. Hull construction and scantlings Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate |
11/30251423 DC : 0
|
BS EN 131-7 - LADDERS - PART 7: MOBILE LADDERS WITH PLATFORM |
ISO 17558:2006
|
Steel wire ropes Socketing procedures Molten metal and resin socketing |
I.S. EN 50528:2010
|
INSULATING LADDERS FOR USE ON OR NEAR LOW VOLTAGE ELECTRICAL INSTALLATIONS |
PREN 1825-1 : DRAFT 1995
|
INSTALLATIONS FOR SEPARATION OF GREASE - PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
NF EN 14974 : 2006 + A1 2010
|
FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 13121-1:2003-10
|
GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions |
DIN EN 13121-2:2004-01
|
GRP tanks and vessels for use above ground - Part 2: Composite materials; Chemical resistance |
EN 13121-1:2003
|
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS |
BS EN 14879-2:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
UNE-EN 16245-2:2014
|
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
BS EN 14879-5:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components |
EN 50528:2010
|
Insulating ladders for use on or near low voltage electrical installations |
EN 1013-2:1998
|
Light transmitting profiled plastic sheeting for single skin roofing - Part 2: Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP) |
DIN EN 14879-4:2008-01
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
DIN EN 14879-2:2007-02
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
EN 1013:2012+A1:2014
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
EN 124-5:2015
|
Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials |
DIN EN ISO 3672-2:2002-07
|
PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 13121-3:2016
|
GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
11/30239977 DC : 0
|
BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
DIN EN 16245-2:2013-08
|
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
09/30209028 DC : 0
|
BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
98/123516 DC : DRAFT JULY 1998
|
PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS |
PREN 13411-4 : DRAFT 2009
|
TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING |
04/30109201 DC : DRAFT OCT 2004
|
EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
UNI CEN ISO/TS 24817 : 2011
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
PREN 131-2 : DRAFT 2009
|
LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
DIN EN 14879-4 E : 2008
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 4: LININGS ON METALLIC COMPONENTS |
DIN EN 14879-5 E : 2007
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 5: LININGS ON CONCRETE COMPONENTS |
I.S. EN 13121-1:2003
|
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS |
ISO/TS 24817:2006
|
Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection |
BS EN 13280:2001
|
Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water |
I.S. EN 131-2:2010
|
LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
I.S. EN 13411-4:2011
|
TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING |
DIN EN 13121-3:2016-10
|
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
UNI EN 13411-4 : 2011
|
TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING |
NF EN 13411-4 : 2011
|
TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING |
BS 5696-1:1997
|
Play equipment intended for permanent installation outdoors General safety requirements and test methods |
08/30193237 DC : 0
|
BS EN 50528 - INSULATING LADDERS FOR USE ON OR NEAR LOW VOLTAGE ELECTRICAL INSTALLATIONS |
14/30298583 DC : 0
|
BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
DIN EN 14974 E : 2010
|
FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
12/30258334 DC : 0
|
BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
CEI EN 50528 : 2011
|
INSULATING LADDERS FOR USE ON OR NEAR LOW VOLTAGE ELECTRICAL INSTALLATIONS |
UNE-EN 124-5:2015
|
Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials |
95/101288 DC : DRAFT FEB 1995
|
PREN 1825-1 - INSTALLATIONS FOR SEPARATION OF GREASE - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
BS ISO 3672-2 : 2000 AMD 13326
|
PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
07/30166095 DC : 0
|
EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS |
ISO 24817:2017
|
Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection |
PREN 131-7 : DRAFT 2011
|
LADDERS - PART 7: MOBILE LADDERS WITH PLATFORM |
BS EN 1013 : 2012
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
BS EN 13121-3:2016
|
GRP tanks and vessels for use above ground Design and workmanship |
BS EN ISO 24817:2017
|
Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
I.S. EN 16245-2:2013
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
I.S. EN 124-5:2015
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS |
ISO 12215-1:2000
|
Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate |
UNE-EN 13121-3:2017
|
GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
I.S. EN ISO 24817:2017
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION (ISO 24817:2017, CORRECTED VERSION 2018-01-01) |
UNE-EN 13411-4:2011
|
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
DIN EN 14879-2 E : 2007
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
DIN EN ISO 3672-2 E : 2002
|
PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN 14879-3 E : 2007
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
DIN EN 13411-4 E : 2011
|
TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING |
BS EN 13121-1:2003
|
GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions |
EN 16245-2:2013
|
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
UNI EN 16245-2 : 2013
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
EN 14974:2006+A1:2010
|
Facilities for users of roller sports equipment - Safety requirements and test methods |
DD CEN ISO/TS 24817:2011
|
Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
BS EN 124-5:2015
|
Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of composite materials |
BS PAS 018(1996) : 1996
|
SPECIFICATION FOR CHILDREN'S PLAYGROUND EQUIPMENT |
DIN EN 124-5 E : 2015
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS |
BS EN 16245-2:2013
|
Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers |
14/30256269 DC : 0
|
BS EN ISO 24817 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
01/121060 DC : DRAFT MAR 2001
|
PREN 13121-3 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
DD ISO/TS 24817 : 2006
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
DIN EN 124-5:2015-09
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS |
PREN 50528 : DRAFT 2008
|
INSULATING LADDERS FOR USE ON OR NEAR LOW VOLTAGE ELECTRICAL INSTALLATIONS |
I.S. EN 1013:2012
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
UNE-EN 14974:2006
|
Facilities for users of roller sports equipment - Safety requirements and test methods |
BS EN 14974 : 2006
|
FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
BS EN 1013-2:1999
|
Light transmitting profiled plastic sheeting for single skin roofing Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP) |
BS EN ISO 3672-2:2001
|
Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties |
BS EN 131-2 : 2010
|
LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
BS EN 14879-4:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
DIN EN 15334 E : 2007
|
SANITARY APPLIANCES - METHACRYLIC DISPERSIONS OF HIGH FILLER CONTENT |
BS EN 14879-3:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
ISO 3672-2:2000
|
Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties |
BS EN 13411-4:2011
|
Terminations for steel wire ropes. Safety Metal and resin socketing |
UNE-EN 1013:2013
|
Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods |
DIN EN 15334:2007-05
|
Sanitary appliances - Methacrylic dispersions of high filler content |
EN 15334:2007
|
Sanitary appliances - Methacrylic dispersions of high filler content |
EN 14879-3:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
EN 14879-2:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
EN 14879-5:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
EN 13280:2001
|
Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water |
EN ISO 3672-2 : 2001
|
PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 14879-4:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
DIN EN 1013:2015-03
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
UNE-EN 50528:2011
|
Insulating ladders for use on or near low voltage electrical installations |
BS EN 50528:2010
|
Insulating ladders for use on or near low voltage electrical installations |
09/30198357 DC : 0
|
BS EN 13411-4 - TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING |
04/30055611 DC : 0
|
BS EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS |
07/30169818 DC : 0
|
BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
04/30123574 DC : DRAFT OCT 2004
|
EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
04/30046221 DC : 0
|
PREN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
03/110340 DC : 0
|
BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
UNI EN 1013 : 2015
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
UNI EN 14974 : 2010
|
FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
EN ISO 12215-1:2000
|
Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
I.S. EN 14974:2006
|
FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
S.R. CEN ISO TS 24817:2011
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
BS EN 13121-2:2003
|
GRP tanks and vessels for use above ground Composite materials. Chemical resistance |
BS EN 15334:2007
|
Sanitary appliances. Methacrylic dispersions of high filler content |
DIN EN 14974:2010-12
|
FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 13411-4:2011-06
|
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
DIN EN 14879-3:2007-02
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
CEN ISO/TS 24817:2011
|
Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006) |
EN 131-2:2010+A2:2017
|
Ladders - Part 2: Requirements, testing, marking |
EN 13411-4:2011
|
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
EN 13121-2:2003
|
GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance |
DIN EN 14879-5:2007-10
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |