Skip to content
Please enter a keyword to search

  • EN 13160-3:2016

    Current The latest, up-to-date edition.

    Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks

    Available format(s): 

    Language(s): 

    Published date:  06-07-2016

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    European foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Requirements
    5 Testing, assessment and sampling methods
    6 Assessment and verification of constancy of performance - AVCP
    7 Marking, labelling and packaging
    8 Environmental aspects
    Annex A (informative) - Environmental aspects
    Annex B (normative) - Test of the compatibility of leak
            detection liquids with metals
    Annex ZA (informative) - Clauses of this European Standard
             addressing the provisions of the EU Construction
             Products Regulation 305/2011/EU
    Bibliography

    Abstract - (Show below) - (Hide below)

    This European Standard gives requirements and the corresponding test/assessment methods applicable to leak detection kits based on the drop of the liquid level in the leak detection liquid reservoir. Leak detection kits are intended to be used with double skin, underground or above ground, non-pressurized, tanks designed for water polluting liquids.The liquid leak detection kits are usually composed of:- sensing device (liquid sensor);- evaluation device;- alarm device.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes PREN 13160-3. (07/2016)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    16/30319005 DC : 0 BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS
    DIN EN 13341:2011-04 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods (includes Amendment A1:2011)
    BS EN 13160-4:2003 Leak detection systems Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
    EN 12285-2 : 2005 WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    CEN/TR 17144:2017 Resistance of metallic materials to liquid biogenic and alternative fuels and their blends
    EN 13341:2005+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods
    EN 13160-7:2016 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
    EN 13160-4:2016 Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems
    DIN EN 12285-2:2005-05 WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    I.S. EN 13160-7:2016 LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS
    I.S. EN 13160-6:2016 LEAK DETECTION SYSTEMS - PART 6: SENSORS IN MONITORING WELLS
    S.R. CEN/TR 17144:2017 RESISTANCE OF METALLIC MATERIALS TO LIQUID BIOGENIC AND ALTERNATIVE FUELS AND THEIR BLENDS
    I.S. EN 13341:2005 STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS
    I.S. EN 13160-4:2016 LEAK DETECTION SYSTEMS - PART 4: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR SENSOR BASED LEAK DETECTION SYSTEMS
    16/30319008 DC : 0 BS EN 12285-3 - WORKSHOP FABRICATED STEEL TANKS - PART 3: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS FOR HEATING AND COOLING OF BUILDINGS
    PREN 12285-1 : DRAFT 2016 WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS
    UNE-EN 13160-7:2017 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
    UNE-EN 13160-6:2017 Leak detection systems - Part 6: Sensors in monitoring wells
    UNI EN 13341 : 2011 STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS
    BS EN 13160-7:2003 Leak detection systems General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
    BS EN 13160-6:2003 Leak detection systems Sensors in monitoring wells
    BS EN 13341 : 2005 STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS
    PD CEN/TR 17144:2017 Resistance of metallic materials to liquid biogenic and alternative fuels and their blends
    UNE-EN 13160-4:2017 Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems
    BS EN 12285-2:2005 Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
    EN 13160-6:2016 Leak detection systems - Part 6: Sensors in monitoring wells

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 13160-7:2016 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
    ISO 2719:2016 Determination of flash point — Pensky-Martens closed cup method
    ISO 7619-1:2010 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
    ASTM D 1177 : 2017 : REDLINE Standard Test Method for Freezing Point of Aqueous Engine Coolants
    EN 1412:2016 Copper and copper alloys - European numbering system
    EN 27888 : 1993 WATER QUALITY - DETERMINATION OF ELECTRICAL CONDUCTIVITY
    EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
    EN ISO 3104:1996 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
    EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
    EN ISO 80079-36:2016 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
    305/2011 : 2011 AMD 2 2014 REGULATION (EU) NO 305/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 2011 LAYING DOWN HARMONISED CONDITIONS FOR THE MARKETING OF CONSTRUCTION PRODUCTS AND REPEALING COUNCIL DIRECTIVE 89/106/EEC (TEXT WITH EEA RELEVANCE)
    EN ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
    EN 13341:2005+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods
    ISO 80079-36:2016 Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements
    ISO 12185:1996 Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method
    EN 61672-1:2013 Electroacoustics - Sound level meters - Part 1: Specifications
    EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
    ISO 175:2010 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
    ISO 7888:1985 Water quality — Determination of electrical conductivity
    IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
    EN 12285-2 : 2005 WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    ISO 9001:2015 Quality management systems — Requirements
    EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
    EN 12285-1:2003 WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    EN ISO 2719:2016 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
    EN 13160-1:2016 Leak detection systems - Part 1: General Principles
    EN 1652:1997/AC:2003 COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES
    EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
    ISO 431:1981 Copper refinery shapes
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective