EN 13411-2:2001+A1:2008
Current
Current
The latest, up-to-date edition.
Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings
Published date
22-10-2008
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Splicing operation
5.1 General
5.2 Number of tucks required
5.3 Direction of the load carrying tucks
5.4 Ropes with a steel wire rope core
5.5 Protruding wires
6 Verification of the safety requirements
6.1 Qualification of personnel
6.2 Number of tucks
6.3 Direction of the tucks
6.4 Ropes with a steel wire rope core
6.5 Protruding wires
Annex ZA (informative) Relationship between this European
standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
This standard specifies minimum requirements for the splicing of eye terminations for six or eight strand steel wire ropes of up to 60 mm diameter complying with prEN 12385-4 used for slings to ensure that the spliced eye is strong enough to withstand a force of at least 80 % of the minimum breaking load of the rope.Other hazards covered by this standard are identified in clause 4. Resistance to fatigue loading is not considered to be a significant hazard for slings and is not covered by this standard.
| Committee |
CEN/TC 168
|
| DevelopmentNote |
2001 Edition Re-Issued in October 2008 & incorporates AMD 1 2008. (11/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 13411-2:2002 | Identical |
| SN EN 13411-2 : 2001 + A1 2009 | Identical |
| I.S. EN 13411-2:2001 | Identical |
| BS EN 13411-2 : 2001 | Identical |
| NF EN 13411-2 : 2001 + A1 2008 | Identical |
| NBN EN 13411-2 : 2001 + A1 2009 | Identical |
| UNI EN 13411-2 : 2009 | Identical |
| NEN EN 13411-2 : 2001 + A1 2008 | Identical |
| NS EN 13411-2 : 2001 + A1 2008 | Identical |
| PN EN 13411-2 : 2003 + A1 2009 | Identical |
| UNE-EN 13411-2:2002+A1:2008 | Identical |
| BS EN 13411-2:2001+A1:2008 | Identical |
| DIN EN 13411-2:2009-02 | Identical |
| 13/30279677 DC : 0 | BS EN 15567-1 - SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| 14/30298215 DC : 0 | BS EN 12604 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - REQUIREMENTS AND TEST METHODS |
| BS EN 16869:2017 | Design/construction of Via Ferratas |
| I.S. EN 13001-3-2:2014 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| 08/30176477 DC : DRAFT APR 2008 | BS EN 14502-1 - CRANES - EQUIPMENT FOR LIFTING OF PERSONS - PART 1: SUSPENDED BASKETS |
| EN 15567-1:2015 | Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements |
| DIN EN 12927-4:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS |
| I.S. EN 14010:2004 | |
| DIN EN 13414-1:2009-02 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| EN 12195-4:2003 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| EN 13157:2004+A1:2009 | Cranes - Safety - Hand powered cranes |
| EN 12927-4:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixings |
| EN 13414-1:2003+A2:2008 | Steel wire rope slings - Safety - Part 1: Slings for general lifting service |
| 06/30157273 DC : 0 | EN 15567-1 - SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| 15/30321787 DC : 0 | BS EN 16869 - DESIGN/CONSTRUCTION OF VIA FERRATA |
| I.S. EN 14504:2016 | INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES AND FLOATING EQUIPMENT ON INLAND WATERS - REQUIREMENTS, TESTS |
| S.R. CWA 15902-1:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS) |
| UNE-EN 14504:2017 | Inland navigation vessels - Floating landing stages and floating equipment on inland waters - Requirements, tests |
| DIN EN 13157:2010-07 | Cranes - Safety - Hand powered cranes (includes Amendment A1:2009) |
| DIN EN 12195-4:2004-04 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| DIN EN 14010:2009-12 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009) |
| DIN EN 14502-1:2010-11 | Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets |
| BS EN 15567-1:2015 | Sports and recreational facilities. Ropes courses Construction and safety requirements |
| BS EN 13414-1 : 2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| I.S. EN 13414-1:2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| I.S. EN 12604:2017 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - REQUIREMENTS AND TEST METHODS |
| EN 12604:2017 | Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods |
| I.S. EN 13157:2004 | CRANES - SAFETY - HAND POWERED CRANES |
| I.S. EN 14502-1:2010 | CRANES - EQUIPMENT FOR LIFTING PERSONS - PART 1: SUSPENDED BASKETS |
| UNI CEN/TS 13001-3-2 : 2008 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| 02/709335 DC : DRAFT JULY 2002 | PREN 14504 - INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES - REQUIREMENTS, TESTS |
| 12/30265273 DC : DRAFT OCT 2012 | BS EN 13001-3-2 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| DIN EN 13001-3-2:2015-10 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| 07/30163564 DC : 0 | BS EN 14504 - INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES - REQUIREMENTS, TESTS |
| 13/30277463 DC : 0 | BS EN 12927 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES |
| I.S. CEN TS 13001-3-2:2005 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| 15/30317830 DC : 0 | BS EN 14504 - INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES AND FLOATING BRIDGES ON INLAND WATERS - REQUIREMENTS, TESTS |
| UNE-EN 13001-3-2:2015 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| PREN 15567-1 : DRAFT 2013 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| I.S. EN 12927-4:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS |
| EN 14504:2016 | Inland navigation vessels - Floating landing stages and floating equipment on inland waters - Requirements, tests |
| UNE-EN 14502-1:2010 | Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets |
| BS EN 14502-1:2010 | Cranes. Equipment for the lifting of persons Suspended baskets |
| UNI EN 13157 : 2009 | CRANES - SAFETY - HAND POWERED CRANES |
| UNI EN 13414-1 : 2009 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| UNI EN 14502-1 : 2010 | CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 1: SUSPENDED BASKETS |
| UNI EN 14010 : 2009 | SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES |
| 05/30076926 DC : DRAFT APR 2005 | EN 12604 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - REQUIREMENTS |
| PREN 14504 : DRAFT 2017 | INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES AND FLOATING BRIDGES ON INLAND WATERS - REQUIREMENTS, TESTS |
| BS EN 13001-3-2:2014 | Cranes. General design Limit states and proof of competence of wire ropes in reeving systems |
| ONORM EN 14504 : 2009 | INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES - REQUIREMENTS, TESTS |
| BS EN 13157 : 2004 | CRANES - SAFETY - HAND POWERED CRANES |
| UNE-EN 12604:2018 | Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods |
| BS EN 14010 : 2003 | |
| I.S. EN 15567-1:2015 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| BS EN 12195-4:2003 | Load restraint assemblies on road vehicles. Safety Lashing steel wire ropes |
| EN 14502-1:2010 | Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets |
| EN 14010:2003+A1:2009 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
| I.S. EN 16869:2017 | DESIGN/CONSTRUCTION OF VIA FERRATAS |
| BS EN 14504:2009 | Inland navigation vessels. Floating landing stages. Requirements, tests |
| PREN 12604 : DRAFT 2014 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 13001-3-2:2004 | Cranes. General design Limit states and proof of competence of wire ropes in reeving systems |
| API 2CCU : 2017 | OFFSHORE CARGO CARRYING UNITS |
| S.R. CEN TS 13001-3-2:2008 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| BS EN 12927-4:2004 | Safety requirements for cableway installations designed to carry person. Ropes End fixings |
| DIN EN 14504:2016-09 | INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES AND FLOATING EQUIPMENT ON INLAND WATERS - REQUIREMENTS, TESTS |
| DIN EN 15567-1:2015-08 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| CEN/TS 13001-3-2:2008 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| EN 13001-3-2:2014 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.