![header thumbnail](/images/img-default-logo.png)
EN 13465:2004
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
![header thumbnail](/images/img-default-logo.png)
Ventilation for buildings - Calculation methods for the determination of air flow rates in dwellings
31-07-2004
21-01-2004
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Classification
5.1 Building types
5.2 Shielding class
6 Input data
6.1 Climatic data
6.2 Building and dwelling related data
6.3 System data
7 Whole house air flow rates
7.1 General
7.2 Input parameters and building representation
7.3 Total air flow rate per dwelling or apartment
7.4 Outdoor air flow rate
7.5 System flow
7.6 Flow balance equation
7.7 Individual flows
7.8 Airing flow
7.9 Combustion induced flow
7.10 Application to APT building types
8 Determination of average flow values
9 Results
9.1 Presentation of results
9.2 Resolution
Annex A (informative) Selection of input data values
A.1 Leakage characteristics for different building
construction types
A.2 Conversion formulas for overall leakage values
A.3 Conversion formula for opening characteristics
A.4 Data on wind pressure coefficients
A.5 Climatic data
A.6 Combustion flow factor
Annex B (informative) Calculation examples
B.1 General
B.2 Multifamily house (including comparison with
measurements)
Bibliography
This Standard specifies methods to calculate basic whole house air flow rates for single family houses and individual apartments up to the size of approximately 1 000 m3, to be used for applications such as energy loss calculations, heat load calculations and indoor air quality evaluations. The same basic methods apply for these different applications, the input parameter values being selected according to the requirements of the specific application.
Committee |
CEN/TC 156
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Withdrawn
|
Standards | Relationship |
NS EN 13465 : 2004 | Identical |
SN EN 13465 : 2004 | Identical |
UNI EN 13465 : 2004 | Identical |
PN EN 13465 : 2006 | Identical |
DIN EN 13465:2004-05 | Identical |
BS EN 13465:2004 | Identical |
NF EN 13465 : 2004 | Identical |
NEN EN 13465 : 2004 | Identical |
I.S. EN 13465:2004 | Identical |
NBN EN 13465 : 2004 | Identical |
UNE-EN 13465:2004 | Identical |
05/30128645 DC : 0 | EN 15241 - VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN COMMERCIAL BUILDINGS |
DIN EN 15643-1:2010-12 | Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework |
DIN EN 15643-4:2012-04 | Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance |
PD CEN/TR 14788:2006 | Ventilation for buildings. Design and dimensioning of residential ventilation systems |
EN 15643-3:2012 | Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance |
EN 15643-1:2010 | Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework |
CEN/TR 14788:2006 | Ventilation for buildings - Design and dimensioning of residential ventilation systems |
BS EN 15643-1:2010 | Sustainability of construction works. Sustainability assessment of buildings General framework |
BS EN 15241:2007 | Ventilation for buildings. Calculation methods for energy losses due to ventilation and infiltration in buildings |
UNI EN 15643-4 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
10/30219687 DC : 0 | BS EN 15643-4 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
DIN EN 15643-3:2012-04 | Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance |
DIN EN 15241:2011-06 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
10/30216730 DC : 0 | BS EN 15643-3 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
EN 15643-2:2011 | Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance |
EN 15643-4:2012 | Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance |
UNI EN 15643-2 : 2011 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE |
BS EN 15643-4:2012 | Sustainability of construction works. Assessment of buildings Framework for the assessment of economic performance |
09/30192729 DC : DRAFT FEB 2009 | BS EN 15643-2 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE |
I.S. EN 15459:2007 | ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS |
10/30219681 DC : 0 | BS EN 15643-3 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
I.S. EN 15643-4:2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
09/30192733 DC : DRAFT FEB 2009 | BS EN 15643-1 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK |
CEN/TR 15615:2008 | Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document |
I.S. EN 15241:2007 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
UNI EN 15643-3 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
DIN EN 15459 E : 2008 | ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS |
UNI EN 15459 : 2008 | ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS |
BS EN 15643-2:2011 | Sustainability of construction works. Assessment of buildings Framework for the assessment of environmental performance |
BS EN 15643-3:2012 | Sustainability of construction works. Assessment of buildings Framework for the assessment of social performance |
DIN EN 15643-2:2011-05 | Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance |
05/30134444 DC : DRAFT MAY 2005 | ISO/DIS 13789 - THERMAL PERFORMANCE OF BUILDINGS - TRANSMISSION AND VENTILATION HEAT TRANSFER COEFFICIENTS - CALCULATION METHOD |
05/30133622 DC : DRAFT MAY 2005 | EN ISO 13790 - THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF ENERGY USE FOR SPACE HEATING AND COOLING |
EN 15241:2007/AC:2011 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
EN 15459:2007 | Energy performance of buildings - Economic evaluation procedure for energy systems in buildings |
DIN EN 15241 E : 2011 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
PD CEN/TR 15615:2008 | Explanation of the general relationship between various CEN standards and the Energy Performance of Buildings Directive (EPBD). Umbrella document |
I.S. EN 15643-3:2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
16/30333945 DC : 0 | BS EN 15643-5 - SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS |
I.S. EN 15643-1:2010 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK |
05/30128642 DC : 0 | PREN 15242 - VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
UNI EN 15643-1 : 2010 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK |
PREN 15643-5 : DRAFT 2016 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS |
I.S. CEN TR 14788:2006 | VENTILATION FOR BUILDINGS - DESIGN AND DIMENSIONING OF RESIDENTIAL VENTILATION SYSTEMS |
I.S. EN 15643-2:2011 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE |
ISO 23045:2008 | Building environment design — Guidelines to assess energy efficiency of new buildings |
BS EN 15459:2007 | Energy performance of buildings. Economic evaluation procedure for energy systems in buildings |
DIN EN 15459:2008-06 | ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS |
EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
EN 13289:2001+A1:2013 | Pasta processing plants - Dryers and coolers - Safety and hygiene requirements |
EN 13141-2:2010 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
EN 13141-1:2004 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices |
CR 1749 : 2001 | EUROPEAN SCHEME FOR THE CLASSIFICATION OF GAS APPLIANCES ACCORDING TO THE METHOD OF EVACUATION OF THE PRODUCTS OF COMBUSTION (TYPES) |
PREN 13141-5 : DRAFT 2017 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 5: COWLS AND ROOF OUTLET TERMINAL DEVICES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.