EN 13656:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Characterization of waste - Microwave assisted digestion with hydrofluoric (HF), nitric (HNO3) and hydrochloric (HCl) acid mixture for subsequent determination of elements
18-11-2020
16-10-2002
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Safety remarks
5 Sample
5.1 Sample pre-treatment
5.2 Mass of test portion
6 Equipment
6.1 Closed vessel system
6.1.1 Microwave unit
6.1.2 Digestion vessels
6.2 Semi-open vessel system
6.2.1 Microwave unit
6.2.2 Digestion vessels
6.3 General equipment
7 Reagents
8 Interferences and sources of error
8.1 General informations
8.2 Closed vessel system
8.3 Semi-open vessel system
9 Procedure
9.1 Blank test
9.2 Procedure for closed vessels
9.2.1 Amount of samples and reagents
9.2.2 Digestion
9.2.3 Complexation of HF
9.2.4 Preparation of the solution for analysis
9.3 Procedure for semi-open vessels
9.3.1 Amount of samples
9.3.2 Digestion and complexation of HF
9.3.3 Preparation of the solution for analysis
10 Test report
Annex A (normative) Calibration of the powder adjustment
Annex B (informative) Validation
Bibliography
This European Standard specifies methods of microwave assisted digestion with hydrofluoric (HF), nitric (HNO3)and hydrochloric (HCL) acid mixture. Solutions produced by the methods are suitable for analysis e.g.by atomic absorption spectometry (FLAAS,HGAAS,CVAAS,GFAAS), inductively coupled plasma emission spectometry(ICP-OES) and inductive coupled plasma mass spectometry(ICP-MS). The method is applicable to the microwave assisted acid digestion of waste for example for the following elements:Al,Sb,As,B,Ba,Be,Cd,Cr,Cu,Fe,Pb,Mg,Mn,Hg,Mo, Ni,P,K,Se,Ag,S,Na,Sr,Te,Ti,Tl,V,Zn.
Committee |
CEN/TC 444
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NBN EN 13656 : 2002 | Identical |
PN EN 13656 : 2006 | Identical |
NEN EN 13656 : 2002 | Identical |
NF EN 13656 : 2003 | Identical |
NS EN 13656 : 1ED 2002 | Identical |
DIN EN 13656:2003-01 | Identical |
I.S. EN 13656:2002 | Identical |
SN EN 13656 : 2002 | Identical |
UNE-EN 13656:2003 | Identical |
BS EN 13656:2002 | Identical |
UNI EN 13656 : 2004 | Identical |
ONORM EN 13656 : 2002 | Identical |
DIN EN 15309:2007-08 | Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
BS EN 15309:2007 | Characterization of waste and soil. Determination of elemental composition by X-ray fluorescence |
DIN EN 15411:2011-11 | Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
13/30272291 DC : 0 | BS ISO 18227 - SOIL QUALITY - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
DIN EN 16424:2015-03 | CHARACTERIZATION OF WASTE - SCREENING METHODS FOR THE ELEMENT COMPOSITION BY PORTABLE X-RAY FLUORESCENCE INSTRUMENTS |
BS EN 15410:2011 | Solid recovered fuels. Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
10/30213003 DC : 0 | BS EN 15411 - SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN) |
BS ISO 18227:2014 | Soil quality. Determination of elemental composition by X-ray fluorescence |
PD CLC/TS 50625-3-1:2015 | Collection, logistics & treatment requirements for WEEE Specification for de-pollution. General |
I.S. EN 16424:2014&LC:2014 | CHARACTERIZATION OF WASTE - SCREENING METHODS FOR THE ELEMENT COMPOSITION BY PORTABLE X-RAY FLUORESCENCE INSTRUMENTS |
I.S. CEN TS 15411:2006 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN) |
EN 15410:2011 | Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
EN 15411:2011 | Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
CEN/TS 15410:2006 | Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
CEN/TS 15411:2006 | Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
DIN EN 15410:2011-11 | Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
BS EN 15411:2011 | Solid recovered fuels. Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
UNI EN 16457 : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
BS ISO 14869-3:2017 | Soil quality. Dissolution for the determination of total element content Dissolution with hydrofluoric, hydrochloric and nitric acids using pressurised microwave technique |
NF EN 15411 : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN) |
BS EN 16424:2014 | Characterization of waste. Screening methods for the element composition by portable X-ray fluorescence instruments |
CLC/TS 50625-3-3:2017 | Collection, logistics & treatment requirements for WEEE - Part 3-3: Specification for de-pollution - WEEE containing CRTs and flat panel displays |
UNE-EN 16424:2015 | Characterization of waste - Screening methods for the element composition by portable X-ray fluorescence instruments |
I.S. EN 16457:2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
17/30348303 DC : 0 | BS EN 17087 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE FOR TESTING OF RELEASE AND ANALYSIS OF CONTENT |
UNE-EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
I.S. EN 15002:2015 | CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
15/30288430 DC : 0 | BS ISO 14869-3 - SOIL QUALITY - DISSOLUTION FOR THE DETERMINATION OF TOTAL ELEMENT CONTENT - PART 3: DISSOLUTION WITH HYDROFLUORIC, HYDROCHLORIC AND NITRIC ACIDS USING PRESSURISED MICROWAVE TECHNIQUE |
ISO 14869-3:2017 | Soil quality — Dissolution for the determination of total element content — Part 3: Dissolution with hydrofluoric, hydrochloric and nitric acids using pressurised microwave technique |
UNE-EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
PD CLC/TS 50625-3-3:2017 | Collection, logistics & treatment requirements for WEEE Specification for de-pollution. WEEE containing CRTs and flat panel displays |
UNI EN 15411 : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN) |
UNI EN 15410 : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI) |
S.R. CLC/TS 50625-3-1:2015 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-1: SPECIFICATION FOR DE-POLLUTION - GENERAL |
04/30116791 DC : DRAFT JUL 2004 | BS EN 15002 - CHARACTERISATION OF WASTE - PREPARATION OF TEST PORTIONS FROM LABORATORY SAMPLE |
12/30263896 DC : 0 | BS EN 16457 - CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
DIN EN 16457:2014-07 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
S.R. CEN/TR 16176:2011 | CHARACTERIZATION OF WASTE - SCREENING METHODS FOR ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE SPECTROMETRY FOR ON-SITE VERIFICATION |
I.S. EN 15411:2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN) |
I.S. EN 15309:2007 | CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
13/30291099 DC : 0 | BS EN 15002 - CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
DIN EN 15002:2015-07 | CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
EN 15309:2007 | Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
CLC/TS 50625-3-1:2015 | Collection, logistics & treatment requirements for WEEE - Part 3-1: Specification for de-pollution - General |
S.R. CLC/TS 50625-3-3:2017 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-3: SPECIFICATION FOR DE-POLLUTION - WEEE CONTAINING CRTS AND FLAT PANEL DISPLAYS |
ISO 18227:2014 | Soil quality — Determination of elemental composition by X-ray fluorescence |
10/30213000 DC : 0 | BS EN 15410 - SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI) |
DD CEN/TS 15410:2006 | Solid recovered fuels. Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
UNE-EN 15410:2012 | Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
DIN EN 16457 E : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
I.S. EN 15410:2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI) |
DD CEN/TS 15411:2006 | Solid recovered fuels. Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
BS EN 16457:2014 | Characterization of waste. Framework for the preparation and application of a testing programme. Objectives, planning and report |
NF EN 15410 : 2011 | SOLID RECOVERED FUELS - METHOD FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI) |
UNE-EN 15411:2012 | Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
CEI CLC/TS 50625-3-3 : 1ED 2018 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-3: SPECIFICATION FOR DE-POLLUTION - WEEE CONTAINING CRTS AND FLAT PANEL DISPLAY |
I.S. CEN TS 15410:2006 | SOLID RECOVERED FUELS - METHOD FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI) |
BS EN 15002:2015 | Characterization of waste. Preparation of test portions from the laboratory sample |
CEN/TR 16176:2011 | Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification |
ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
ISO 11466:1995 | Soil quality — Extraction of trace elements soluble in aqua regia |
EN 1483:2007 | Water quality - Determination of mercury - Method using atomic absorption spectrometry |
EN ISO 5961:1995 | Water quality - Determination of cadmium by atomic absorption spectrometry (ISO 5961:1994) |
ISO 5961:1994 | Water quality Determination of cadmium by atomic absorption spectrometry |
ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
ENV 12506 : DRAFT 2000 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, CD, CR (6), CU, NI, PB, ZN, CL[-], NO[2][-], SO[4][2-] |
ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
ISO 8288:1986 | Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods |
ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
EN 1233:1996 | Water quality - Determination of chromium - Atomic absorption spectrometric methods |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
EN ISO 11969:1996 | Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996) |
ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
EN 45001 : 1989 | GENERAL CRITERIA FOR THE OPERATION OF TESTING LABORATORIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.