EN 13707:2013
Current
Current
The latest, up-to-date edition.
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
Published date
02-10-2013
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 System-related characteristics
5 Product characteristics
6 Evaluation of conformity
7 Product data sheet
8 Marking, labelling and packaging
Annex A (normative) - Applicability of characteristics
Annex B (normative) - Frequencies of testing for
factory production control
Annex C (informative) - Information about chemical
resistance
Annex D (informative) - Example of a product data
sheet - General information
Annex E (informative) - Wind-uplift properties of
mechanically fixed bituminous membranes -
General information
Annex ZA (informative) - Clauses of this European
Standard addressing essential requirements
or other provisions of EU Directives
Bibliography
This European Standard specifies definitions and characteristics for flexible reinforced bitumen sheets for which the intended use is roofing. This covers sheets used as top layers, intermediate layers and underlayers. It does not cover reinforced bitumen sheets for waterproofing used as underlays for discontinuous roofing.This European Standard does not cover waterproofing sheets which are intended to be used fully bonded under bituminous products (e.g. asphalt) directly applied at high temperature, specified by EN 14695.
| Committee |
CEN/TC 254
|
| DevelopmentNote |
Supersedes PREN 13707. (10/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 13707 : 2013 | Identical |
| SN EN 13707 : 2013 | Identical |
| UNI EN 13707 : 2013 | Identical |
| PN EN 13707 : 2013 | Identical |
| NEN EN 13707 : 2013 | Identical |
| DIN EN 13707:2013-12 | Identical |
| UNE-EN 13707:2014 | Identical |
| I.S. EN 13707:2013 | Identical |
| BS EN 13707:2013 | Identical |
| NF EN 13707 : 2014 | Identical |
| NBN EN 13707 : 2013 | Identical |
| BS EN 14695:2010 | Flexible sheets for waterproofing. Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete. Definitions and characteristics |
| PREN 16002 : DRAFT 2016 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING |
| DIN EN 16002:2016-10 (Draft) | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING |
| I.S. EN 16002:2010 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING |
| PD CEN/TS 16459:2013 | External fire exposure of roofs and roof coverings. Extended application of test results from CEN/TS 1187 |
| S.R. CEN/TS 16459:2013 | EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187 |
| BS EN 1297:2004 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water |
| EN 1110:2010 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature |
| CEN/TR 16625:2013 | Flexible sheets for waterproofing - Statistical definition of manufacturer's limiting value and declared value (MLV and MDV) - 95 % Statistic |
| S.R. CEN/TR 16625:2013 | FLEXIBLE SHEETS FOR WATERPROOFING - STATISTICAL DEFINITION OF MANUFACTURER'S LIMITING VALUE AND DECLARED VALUE (MLV AND MDV) - 95% STATISTIC |
| EN 16002:2010 | Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing |
| DIN EN 1110:2011-03 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature |
| I.S. EN 1110:2010 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF FLOW RESISTANCE AT ELEVATED TEMPERATURE |
| DIN EN 1297:2004-12 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water; German version EN 1297:2004 |
| KTA 2501 : 2015(R2017) | STRUCTURAL WATERPROOFING OF NUCLEAR POWER PLANTS |
| PD CEN/TR 16625:2013 | Flexible sheets for waterproofing. Statistical definition of manufacturer\'s limiting value and declared value (MLV and MDV). 95 % Statistic |
| UNI EN 14695 : 2010 | FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER TRAFFICKED AREAS OF CONCRETE - DEFINITIONS AND CHARACTERISTICS |
| BS EN 16002:2010 | Flexible sheets for waterproofing. Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing |
| UNI EN 16002 : 2010 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING |
| UNI EN 1110 : 2011 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF FLOW RESISTANCE AT ELEVATED TEMPERATURE |
| UNI CEN/TS 16459 : 2014 | EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187 |
| NF EN 16002 : 2010 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING |
| 16/30346712 DC : 0 | BS EN 16002 - FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING |
| BS EN 1110:2010 | Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flow resistance at elevated temperature |
| CEN/TS 16459:2013 | External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187 |
| UNE-EN 1110:2011 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature |
| UNE-EN 14695:2010 | Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics |
| EN 14695:2010 | Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics |
| 09/30207859 DC : 0 | BS EN 16002 - FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING |
| DIN EN 14695:2010-05 | Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics; German version EN 14695:2010 |
| I.S. EN 14695:2010 | FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER TRAFFICKED AREAS OF CONCRETE - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 16002:2010-10 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING |
| EN 1297:2004 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water |
| EN 1848-1:1999 | Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing |
| EN 1850-1:1999 | Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bitumen sheets for roof waterproofing |
| EN 13948:2007 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| EN 1107-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of dimensional stability |
| EN 1928:2000 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness |
| EN 12311-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties |
| EN 12310-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank) |
| EN 1109:2013 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature |
| EN 1297:2004 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 13897:2004 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness after stretching at low temperature |
| EN 12316-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints |
| EN 1296:2000 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 12730:2015 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading |
| EN 1108:1999 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes |
| EN 1849-1:1999 | Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing |
| EN 1110:2010 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature |
| EN 13416:2001 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling |
| EN 14695:2010 | Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics |
| EN 16002:2010 | Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing |
| EN 12317-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.