EN 13889:2003+A1:2008
Current
The latest, up-to-date edition.
Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety
12-11-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Safety requirements
6 Verification of safety requirements
7 Marking
8 Manufacturer's certificate
9 Instructions for use
Annex A (informative) Safe use of shackles
Annex B (normative) Shackle pins
Annex C (informative) Designation system for forged
steel shackles
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
This European Standard specifies requirements for forged steel Dee and bow shackles of grade 6 for general lifting purposes in a range of working load limits 0,5 t to 25 t maximum.This standard applies only to those shackles with threaded pins.Annex A gives information on the safe use of shackles, annex B gives information on types of pins, and annex C gives an example of a designation system for forged steel shackles.The hazards covered are identified in clause 4.
| Committee |
CEN/TC 168
|
| DevelopmentNote |
2003 Edition Re-Issued in November 2008 & incorporates AMD 1 2008. (01/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| SN EN 13889 : 2003 + A1 2009 | Identical |
| I.S. EN 13889:2003 | Identical |
| NF EN 13889 : 2003 + A1 2009 | Identical |
| NBN EN 13889 : 2003 + A1 2009 | Identical |
| UNE-EN 13889:2004+A1:2009 | Identical |
| PN EN 13889 : 2005 + A1 2009 | Identical |
| UNI EN 13889 : 2009 | Identical |
| NEN EN 13889 : 2003 + A1 2008 | Identical |
| BS EN 13889 : 2003 | Identical |
| NS EN 13889 : 2003 + A1 2008 | Identical |
| UNE-EN 13889:2004 | Identical |
| BS EN 13889:2003+A1:2008 | Identical |
| DIN EN 13889:2009-02 | Identical |
| ISO 17842-1:2015 | Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
| 16/30328759 DC : 0 | BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| 14/30278953 DC : 0 | BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| DIN EN 13414-1:2009-02 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| EN 12195-4:2003 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| EN 13414-1:2003+A2:2008 | Steel wire rope slings - Safety - Part 1: Slings for general lifting service |
| EN 12079-2:2006 | Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and marking |
| DIN EN 12195-4:2004-04 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| BS EN 13414-1 : 2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| I.S. EN 13414-1:2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| BS EN 12079-2:2006 | Offshore containers and associated lifting sets Lifting sets. Design, manufacture and marking |
| UNI EN 13414-1 : 2009 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| I.S. EN 12079-2:2006 | OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING |
| 15/30331863 DC : 0 | BS EN ISO 10855-2 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING |
| EEMUA 101 : 2013 | LIFTING POINTS - A DESIGN GUIDE |
| DIN EN 13814:2005-06 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| BS EN 12195-4:2003 | Load restraint assemblies on road vehicles. Safety Lashing steel wire ropes |
| EN 13814:2004 | Fairground and amusement park machinery and structures - Safety |
| I.S. EN 13814:2005 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| ISO 10855-2:2018 | Offshore containers and associated lifting sets — Part 2: Design, manufacture and marking of lifting sets |
| BS EN 13814:2004 | Fairground and amusement park machinery and structures. Safety |
| BS ISO 17842-1:2015 | Safety of amusement rides and amusement devices Design and manufacture |
| ISO/IEC Guide 62:1996 | General requirements for bodies operating assessment and certification/registration of quality systems |
| EN 10045-2 : 1992 COR 1993 | METALLIC MATERIALS - CHARPY IMPACT TEST - VERIFICATION OF THE TESTING MACHINE (PENDULUM IMPACT) |
| EN 10228-2:2016 | Non-destructive testing of steel forgings - Part 2: Penetrant testing |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| EN 10228-1:1999 | Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| EN 818-6:2000+A1:2008 | Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| EN 45012 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| ISO 263:1973 | ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0,06 to 6 in |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.