EN 14035-25:2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fireworks - Part 25: Party Poppers - Specification and test methods
01-09-2010
02-11-2005
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
4.1 Shape
4.2 Materials of firework case
4.3 Integrity
4.4 Length of pull-string
4.5 Ejected material
5 Performance
5.1 Pull-string
5.2 Principal effects
5.3 Number of reports
5.4 Sound pressure level
5.5 Burning matter
5.6 Projected material
5.7 Integrity of firework case after functioning
6 Primary pack
7 Minimum labelling requirements
7.1 General
7.2 Type name and category
7.3 Safety information
7.3.1 General
7.3.2 Party poppers
7.4 Name, address and telephone number of
manufacturer or distributor or importer
7.5 Reference to this standard
7.6 Printing
7.6.1 Labelling
7.6.2 Type size
7.7 Marking of very small party poppers
7.7.1 Reduced size
7.7.2 Reduced information
7.8 Additional information on the primary pack
8 Test methods
8.1 Length of pull-string (type test and batch test)
8.1.1 Apparatus
8.1.2 Procedure
8.2 Performance (type test and batch test)
8.2.1 Test environment
8.2.2 Material
8.2.3 Apparatus
8.2.4 Procedure
8.3 Labelling (type test and batch test)
Annex A (normative) Type testing
Annex B (normative) Batch testing
Annex C (Normative) Specification for test paper
Annex D (normative) Method for determination of
smouldering rate of cigarette
Annex E (informative) A-Deviations
Bibliography
This European Standard specifies requirements for the construction, performance, primary packaging and labelling of party poppers and the corresponding test methods. It is applicable to fireworks which are classified as party poppers in category 1 of EN 14035-2 and which are contained in a primary pack.It is applicable to party poppers which contain up to 10 mg of pyrotechnic composition that is based on potassium chlorate and red phosphorous.It is not applicable to party poppers containing pyrotechnic composition that includes any of the following substances:arsenic or arsenic compounds;mixtures containing a mass fraction of chlorates greater than 80 percent;mixtures of chlorates with metals;mixtures of chlorates with potassium hexacyanoferrate(II);mixtures of chlorates with sulfur;mixtures of chlorates with sulfides;lead or lead compounds;mercury compounds;white phosphorus;picrates or picric acid;potassium chlorate with a mass fraction of bromates greater than 0,15 percent;sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 percent;zirconium with a particle size of less than 40 mm.NOTEIn EN 14035-2, party poppers are classified as follows:- brief description: device operated by a pull-string with an abrasive surface in sliding contact with a friction-sensitive pyrotechnic composition and designed to be held in the hand;- principal effects: report, with ejection of streamers and/or confetti.Schemes for type testing of party poppers and batch testing of party poppers are specified in annex A and annex B respectively.
Committee |
CEN/TC 212
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NS EN 14035-25 : 1ED 2006 | Identical |
DIN EN 14035-25:2006-01 | Identical |
I.S. EN 14035-25:2005 | Identical |
UNI EN 14035-25 : 2006 | Identical |
NBN EN 14035-25 : 2006 | Identical |
NEN EN 14035-25 : 2005 | Identical |
PN EN 14035-25 : 2006 | Identical |
NF EN 14035-25 : 2006 | Identical |
UNE-EN 14035-25:2006 | Identical |
SN EN 14035-25 : 2006 | Identical |
BS EN 14035-25:2005 | Identical |
ISO 845:2006 | Cellular plastics and rubbers — Determination of apparent density |
ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
EN ISO 845:2009 | Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006) |
EN ISO 536:2012 | Paper and board - Determination of grammage (ISO 536:2012) |
EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
EN 20187:1993 | Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990) |
ISO 536:2012 | Paper and board Determination of grammage |
ISO 2439:2008 | Flexible cellular polymeric materials Determination of hardness (indentation technique) |
EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
EN ISO 2439:2008 | Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008) |
ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.