EN 14035-5:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fireworks - Part 5: Batteries and combinations - Specification and test methods
01-09-2010
22-02-2006
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Elements in the battery or combination
5 Construction
6 Performance
7 Primary pack or selection pack
8 Minimum labelling requirements
9 Methods of test
Annex A (normative) Type testing
Annex B (normative) Batch testing
Annex C (normative) Method for determination of
smouldering rate of cigarette
Annex D (informative) A-Deviations
This European Standard specifies requirements for the construction, performance, primary packaging and labelling of batteries and combinations and the corresponding test methods. It is applicable to fireworks which are classified as batteries and combinations in categories 2 and 3 according to EN 14035-2.It is applicable to category 2 batteries and combinations containing elements, each corresponding to a type of fireworks listed in EN 14035-2 and which conform to the relevant requirements of categories 1 and 2.It is applicable to category 3 batteries and combinations containing elements, each corresponding to a type fireworks listed in EN 14035-2 and which conform to the relevant requirements of categories 1, 2 and 3.It is not applicable to banger batteries and flash banger batteries, which are specified in EN 14035-4 and EN 14035-12 respectively.NOTE 1The elements (types of firework) that can be included in a battery or combination are specified in Clause 4.It is not applicable to batteries and combinations containing pyrotechnic composition that includes any of the following substances:-arsenic or arsenic compounds;-mixtures containing a mass fraction of chlorates greater than 80 %;-mixtures of chlorates with metals;-mixtures of chlorates with red phosphorus;-mixtures of chlorates with potassium hexacyanoferrate(II);-mixtures of chlorates with sulfur;-mixtures of chlorates with sulfides;-lead or lead compounds;-mercury compounds;-white phosphorus;-picrates or picric acid;-potassium chlorate with a mass fraction of bromates greater than 0,15 %;-sulfur with an acidity, expressed as mass fraction of sulfuric acid, greater than 0,002 %;-zirconium with a particle size of less than 40 mm.NOTE 2In EN 14035-2, batteries and combinations are classified as follows:- brief description:- battery: assembly including several elements, each of the same type and corresponding to one of the types of firework listed in
Committee |
CEN/TC 212
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
SN EN 14035-5 : 2006 | Identical |
NEN EN 14035-5 : 2006 | Identical |
PN EN 14035-5 : 2007 | Identical |
UNE-EN 14035-5:2006 | Identical |
NBN EN 14035-5 : 2006 | Identical |
I.S. EN 14035-5:2006 | Identical |
BS EN 14035-5:2006 | Identical |
NF EN 14035-5 : 2006 | Identical |
UNI EN 14035-5 : 2006 | Identical |
NS EN 14035-5 : 1ED 2006 | Identical |
DIN EN 14035-5:2006-05 | Identical |
IEC 61672-2:2013+AMD1:2017 CSV | Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests |
EN 61672-2:2013/A1:2017 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017) |
ISO 845:2006 | Cellular plastics and rubbers — Determination of apparent density |
EN ISO 845:2009 | Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006) |
EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
ISO 2439:2008 | Flexible cellular polymeric materials Determination of hardness (indentation technique) |
EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
EN ISO 2439:2008 | Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008) |
ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.