EN 14035-8:2004

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
  4.1 Protection of Bengal stick
  4.2 Material of stick
  4.3 Integrity
  4.4 Net explosive content
  4.5 Length of uncoated end of wooden stick (handle)
5 Performance
  5.1 Ignition of Bengal stick
  5.2 Principal effects
  5.3 Burning of pyrotechnic composition
  5.4 Burning time of pyrotechnic composition
  5.5 Burning matter
6 Primary pack
7 Minimum labelling requirements
  7.1 General
  7.2 Type name and category
  7.3 Safety information
      7.3.1 General
      7.3.2 Bengal sticks
  7.4 Name, address and telephone number of manufacturer
      or distributor or importer
  7.5 Reference to this standard
  7.6 Printing
      7.6.1 Labelling
      7.6.2 Type size
  7.7 Additional information on the primary pack
8 Test methods
  8.1 Length of uncoated end of wooden stick (type test
      and batch test)
      8.1.1 Apparatus
      8.1.2 Procedure
  8.2 Performance (type test and batch test)
      8.2.1 Test environment
      8.2.2 Material
      8.2.3 Apparatus
      8.2.4 Procedure
  8.3 Determination of net explosive content (type test)
      8.3.1 Material
      8.3.2 Apparatus
      8.3.3 Procedure
  8.4 Labelling (type test and batch test)
Annex A (normative) Type testing
  A.1 General
  A.2 Number of Bengal sticks to be tested
  A.3 Loose pyrotechnic composition
  A.4 Thermal conditioning
  A.5 Mechanical conditioning
      A.5.1 Apparatus
      A.5.2 Procedure
  A.6 Number of primary packs to be examined
  A.7 Test report
Annex B (normative) Batch testing
  B.1 General
  B.2 Sampling plans
  B.3 Unit of product
  B.4 Nonconformities
  B.5 Test report
  B.6 Acceptance or rejection of a batch
      B.6.1 General
      B.6.2 Nonconforming units
      B.6.3 Critical nonconforming units
      B.6.4 Major nonconforming units
      B.6.5 Minor nonconforming units
Annex C (normative) Specification for test paper
  C.1 Requirements
  C.2 Scorch test
      C.2.1 Material
      C.2.2 Apparatus
      C.2.3 Test specimen
      C.2.4 Procedure
Annex D (normative) Method for determination of smouldering
        rate of cigarette
Annex E (informative) A-Deviations

This document specifies requirements for the construction, performance, primary packaging and labelling of Bengal sticks and the corresponding test methods. It is applicable to fireworks which are classified as Bengal sticks in categories 1 and 2 in EN 14035-2 and which are contained in a primary pack.It is not applicable to Bengal sticks containing pyrotechnic composition that includes any of the following substances:-arsenic or arsenic compounds;-mixtures containing a mass fraction of chlorates greater than 80 %;-mixtures of chlorates with metals;-mixtures of chlorates with red phosphorus;-mixtures of chlorates with potassium hexacyanoferrate(II);-mixtures of chlorates with sulfur;-mixtures of chlorates with sulfides;-lead or lead compounds;-mercury compounds;-white phosphorus;-picrates or picric acid;-potassium chlorate with a mass fraction of bromates greater than 0,15 %;-sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %;-zirconium with a particle size of less than 40 mm.NOTEIn EN 14035-2, Bengal sticks are classified as follows:- brief description: wooden stick partially coated (along one end) with slow-burning pyrotechnic composition and designed to be held in the hand;- principal effects: emission of coloured flames and sparks.Schemes for type testing of Bengal sticks and batch testing of Bengal sticks are specified in annex A and annex B respectively.Requirements for construction, performance, labelling, sampling and testing of Bengal sticks