EN 14322:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification
07-12-2021
22-03-2017
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Appearance
6 Classification by resistance to abrasion
7 Verification of compliance
8 Marking
Annex A (normative) - Supplementary properties
Annex B (normative) - Formaldehyde release
Bibliography
This European Standard specifies the surface requirements and dimensional tolerances for decorative melamine faced boards for interior use which are common for particleboards, extruded particleboards fibreboards and sandwich boards for furniture.This standard does not apply to boards laminated with so called priming foils or finish foils and laminates according to EN 438 1.This standard does not apply to laminate floor coverings.Melamine faced wood-based boards in accordance with this standard may be referred to as MFB.
| Committee |
CEN/TC 112
|
| DevelopmentNote |
Supersedes PREN 14322. (03/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 14322 : 2017 | Identical |
| I.S. EN 14322:2017 | Identical |
| NBN EN 14322 : 2004 | Identical |
| BS EN 14322:2017 | Identical |
| SN EN 14322 : 2017 | Identical |
| UNE-EN 14322:2017 | Identical |
| NEN EN 14322 : 2017 | Identical |
| NS EN 14322 : 2017 | Identical |
| NF EN 14322 : 2017 | Identical |
| DIN EN 14322:2004-06 | Identical |
| DIN EN 14322:2017-07 | Identical |
| PN EN 14322 : 2017 | Identical |
| UNI EN 14322 : 2005 | Identical |
| BS EN 16337:2013 | Hardware for furniture. Strength and loading capacity of shelf supports |
| I.S. EN 16337:2013 | HARDWARE FOR FURNITURE - STRENGTH AND LOADING CAPACITY OF SHELF SUPPORTS |
| BS EN 14323:2017 | Wood-based panels. Melamine faced boards for interior uses. Test methods |
| EN 15186:2012 | Furniture - Assessment of the surface resistance to scratching |
| BS EN 15186:2012 | Furniture. Assessment of the surface resistance to scratching |
| 11/30251691 DC : 0 | BS EN 16337 - HARDWARE FOR FURNITURE - STRENGTH AND LOADING CAPACITY OF SHELF SUPPORTS |
| DIN EN 16337:2013-08 | HARDWARE FOR FURNITURE - STRENGTH AND LOADING CAPACITY OF SHELF SUPPORTS |
| UNE-EN 16337:2013 | Hardware for furniture - Strength and loading capacity of shelf supports |
| I.S. EN 14323:2017 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS |
| UNI EN 15186 : 2012 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO SCRATCHING |
| DIN EN 15186:2012-07 | Furniture - Assessment of the surface resistance to scratching; German version EN 15186:2012 |
| I.S. EN 15186:2012 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO SCRATCHING |
| DIN EN 14323:2004-06 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS |
| UNE-EN 15186:2012 | Furniture - Assessment of the surface resistance to scratching |
| UNE-EN 14323:2017 | Wood-based panels - Melamine faced boards for interior uses - Test methods |
| EN 16337:2013 | Hardware for furniture - Strength and loading capacity of shelf supports |
| UNI EN 16337 : 2013 | HARDWARE FOR FURNITURE - STRENGTH AND LOADING CAPACITY OF SHELF SUPPORTS |
| EN 14323:2017 | Wood-based panels - Melamine faced boards for interior uses - Test methods |
| EN 14323:2017 | Wood-based panels - Melamine faced boards for interior uses - Test methods |
| CEN/TS 16526:2013 | Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics |
| EN 14755:2005 | Extruded particleboards - Specifications |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| EN ISO 12460-3:2015 | Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2015) |
| EN 312:2010 | Particleboards - Specifications |
| EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| EN 320:2011 | Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
| EN 438-1:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information |
| ISO 12460-3:2015 | Wood-based panels Determination of formaldehyde release Part 3: Gas analysis method |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
| EN 311:2002 | Wood-based panels - Surface soundness - Test method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.