EN 14678-2:2007+A1:2012
Current
The latest, up-to-date edition.
LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements
08-02-2012
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Signs
6 Testing of the installation
7 Commissioning of the installation
Annex A (informative) - Explanatory drawings
Bibliography
This European Standard covers the installation requirements, on fixed LPG filling stations and on multi-fuel filling stations, for the automotive LPG equipment and components, which are required to safely dispense automotive LPG.This European Standard does not cover on-site and off-site safety distances.NOTEUsers of this European Standard should be aware that National regulations may be in place covering all or some of the requirements of this European Standard. National regulations over-ride any requirement in this European Standard in the states where they apply.
| Committee |
CEN/TC 286
|
| DevelopmentNote |
2007 Edition Re-issued in February 2012 & incorporates AMD 1 2012. (03/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 14678-2 : 2007 + A1 2012 | Identical |
| NF EN 14678-2 : 2007 + A1 2012 | Identical |
| I.S. EN 14678-2:2007 | Identical |
| UNE-EN 14678-2:2009 | Identical |
| DIN EN 14678-2:2012-04 | Identical |
| BS EN 14678-2 : 2007 | Identical |
| PN EN 14678-2 : 2009 + A1 2012 | Identical |
| SN EN 14678-2+A1:2012 | Identical |
| UNI EN 14678-2 : 2012 | Identical |
| NBN EN 14678-2 : 2008 + A1 2012 | Identical |
| NEN EN 14678-2 : 2007 + A1 2012 | Identical |
| UNE-EN 14678-2:2009+A1:2012 | Identical |
| BS EN 14678-2:2007+A1:2012 | Equivalent |
| 10/30227671 DC : 0 | BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| I.S. EN 14678-1:2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| PREN 14678-1 : DRAFT 2010 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| UNE-EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| UNI EN 14678-1 : 2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| DIN EN 14678-1:2013-06 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| BS EN 14678-1:2013 | LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers |
| IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| EN 13789:2010 | Industrial valves - Cast iron globe valves |
| EN 13175:2014 | LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
| EN 14570:2014 | LPG equipment and accessories - Equipping of overground and underground LPG vessels |
| CEN/TS 13547:2006 | Industrial valves - Copper alloy ball valves |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN 1983:2013 | Industrial valves - Steel ball valves |
| EN 751-2:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
| EN 12954:2001 | Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines |
| EN 13709:2010 | Industrial valves - Steel globe and globe stop and check valves |
| EN 15257:2006 | Cathodic protection - Competence levels and certification of cathodic protection personnel |
| EN 589:2008+A1:2012 | Automotive fuels - LPG - Requirements and test methods |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| EN ISO 11114-2:2013 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013) |
| EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| EN 60079-10:2003 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| EN 12068:1998 | Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions |
| EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| EN 12542:2010 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
| CLC/TR 50404:2003 | Electrostatics - Code of practice for the avoidance of hazards due to static electricity |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.