EN 15316-3-3:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-3: Domestic hot water systems, generation
01-05-2017
03-10-2007
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols, units and indices
5 Energy output of the domestic hot water generation
sub-system
5.1 General
5.2 Domestic hot water systems with a single
heat generator
5.3 Domestic hot water systems with multiple
heat generators
5.3.1 General
5.3.2 Domestic hot water systems with different
types of heat generators in a series
configuration
5.3.3 Domestic hot water systems with multiple
heat generators in a parallel configuration
6 Indirectly heated hot water storage vessel
7 Primary circulation pipes
7.1 General
7.2 Thermal losses by a simple estimation method
7.3 Thermal losses by a detailed calculation method
8 Direct heated domestic hot water generation devices
8.1 General
8.2 Heat generation systems in single-family dwellings
8.3 Heat generation systems others than for
single-family dwellings
8.3.1 Oil and gas fired boilers
8.3.2 Direct gas fired domestic storage water heater
8.3.3 Direct electrical heated domestic storage
water heaters
8.3.4 Alternative generators
9 Auxiliary energy
9.1 Total auxiliary energy consumption
9.2 Auxiliary energy consumption for primary circulation
pumps
9.3 Auxiliary energy consumption for direct heated domestic
hot water generation devices
10 Recoverable heat losses, recovered heat losses and
unrecoverable heat losses
Annex A (informative) - Calculation of thermal loss from a
gas or oil fired boiler in systems other
than for single family dwellings
A.1 Calculation of total boiler thermal loss
A.2 Calculation of heat loss during boiler operation
A.3 Calculation of stand-by heat loss
A.3.1 General
A.3.2 Average boiler temperature during a
stand-by period
A.3.3 Load factor of a boiler
A.3.4 Auxiliary energy consumption for a boiler
A.3.5 Nominal output efficiency of a boiler
Annex B (informative) - Thermal loss from a gas fired domestic
storage water heater
Annex C (informative) - Thermal loss from an electrical heated
domestic storage water heater
(with continuous power on)
Annex D (informative) - Thermal loss from an electrical heated
domestic storage water heater (with
timed power on)
Bibliography
This European Standard is part of a set of standards covering the methods for calculation of system energy requirements and system efficiencies of heating systems in buildings. In particular this standard is one of a number of standards dealing with domestic hot water systems.The scope of this specific part is to standardise the methods for calculation of:-thermal losses from the domestic hot water generation system;-recoverable thermal losses for space heating from the domestic hot water generation system;-auxiliary energy of the domestic hot water generation systems.These values are input data for calculation of the overall energy use according to prEN 15603 and EN 15316-1.This European Standard specifies the:-inputs;-calculation methods;outputs.
Committee |
CEN/TC 228
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
I.S. EN 15316-3-3:2007 | Identical |
UNE-EN 15316-3-3:2008 | Identical |
UNI EN 15316-3-3 : 2008 | Identical |
DIN EN 15316-3-3:2008-06 | Identical |
BS EN 15316-3-3:2007 | Identical |
NEN EN 15316-3-3 : 2007 | Identical |
NS EN 15316-3-3 : 1ED 2007 | Identical |
SN EN 15316-3-3 : 2007 | Identical |
NBN EN 15316-3-3 : 2007 | Identical |
NF EN 15316-3-3 : 2008 | Identical |
BS EN 15316-4-7:2008 | Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies Space heating generation systems, biomass combustion systems |
DIN EN 15643-4:2012-04 | Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance |
CEN/TR 15232-2:2016 | Energy performance of buildings - Part 2: Accompanying TR prEN 15232-1:2015 - Modules M10-4,5,6,7,8,9,10 |
UNI EN 15316-4-7 : 2009 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS |
DIN EN 15232:2012-04 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
BS EN 15232:2012 | Energy performance of buildings. Impact of Building Automation, Controls and Building Management |
UNI EN 15643-4 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
BS EN 15643-4:2012 | Sustainability of construction works. Assessment of buildings Framework for the assessment of economic performance |
NF EN 15316-4-7 : 2009 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS |
DIN EN 15643-3:2012-04 | Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance |
I.S. EN 15643-4:2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
ISO 13675:2013 | Heating systems in buildings — Method and design for calculation of the system energy performance — Combustion systems (boilers) |
EN 15643-4:2012 | Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance |
EN 15643-3:2012 | Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance |
UNE-EN 15316-4-1:2010 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating generation systems, combustion systems (boilers) |
I.S. EN 15643-3:2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
UNE-EN 15316-4-2:2010 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump systems |
UNE-EN 15232:2014 | Energy performance of buildings - Impact of Building Automation, Controls and Building Management |
DIN EN 15316-4-7:2009-02 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS |
16/30333945 DC : 0 | BS EN 15643-5 - SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS |
S.R. CEN/TR 15232-2:2016 | ENERGY PERFORMANCE OF BUILDINGS - PART 2: ACCOMPANYING TR PREN 15232-1:2015 - MODULES M10-4,5,6,7,8,9,10 |
CEN/TR 15615:2008 | Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document |
I.S. EN 15316-4-7:2008 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS |
ISO 23045:2008 | Building environment design — Guidelines to assess energy efficiency of new buildings |
UNI EN 15643-3 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
UNI EN 15232 : 2012 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
11/30244232 DC : DRAFT JUNE 2011 | BS EN 15232 - ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
PD CEN/TR 15232-2:2016 | Energy performance of buildings Accompanying TR prEN 15232-1:2015. Modules M10-4,5,6,7,8,9,10 |
EN 15316-4-7:2008 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems |
EN 15232:2012 | Energy performance of buildings - Impact of Building Automation, Controls and Building Management |
BS EN 15643-3:2012 | Sustainability of construction works. Assessment of buildings Framework for the assessment of social performance |
I.S. EN 15232:2012 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
PD CEN/TR 15615:2008 | Explanation of the general relationship between various CEN standards and the Energy Performance of Buildings Directive (EPBD). Umbrella document |
12/30239784 DC : 0 | BS ISO 13675 - HEATING AND COOLING SYSTEMS IN BUILDINGS - METHOD AND DESIGN FOR CALCULATION OF THE SYSTEM ENERGY PERFORMANCE - COMBUSTION SYSTEMS (BOILERS) |
BS ISO 13675:2013 | Heating systems in buildings. Method and design for calculation of the system energy performance. Combustion systems (boilers) |
PREN 15643-5 : DRAFT 2016 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS |
UNE-EN 15316-4-7:2010 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems |
PREN 15316-4-1 : DRAFT 2014 | HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-1: SPACE HEATING AND DHW GENERATION SYSTEMS, COMBUSTION SYSTEMS (BOILERS, BIOMASS) |
EN 677:1998 | Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW |
ISO 9488:1999 | Solar energy Vocabulary |
EN 15316-4-4:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems, building-integrated cogeneration systems, Module M8-3-4, M8-8-4, M8-11-4 |
EN 304:2017 | Heating boilers - Test code for heating boilers for atomizing oil burners |
EN 15316-4-6:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-6: Heat generation systems, photovoltaic systems |
EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water |
EN 13203-2:2015 | Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption |
EN 15316-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4 |
IEC 60379:1987 | Methods for measuring the performance of electric storage water-heaters for household purposes |
EN ISO 13790:2008 | Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008) |
EN 15316-4-3:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3 |
ISO 13602-2:2006 | Technical energy systems Methods for analysis Part 2: Weighting and aggregation of energywares |
EN ISO 9488:1999 | Solar energy - Vocabulary (ISO 9488:1999) |
EN 15450:2007 | Heating systems in buildings - Design of heat pump heating systems |
PRCEN/TR 15615 : DRAFT 2014 | ENERGY PERFORMANCE OF BUILDINGS - MODULE M1-X - ACCOMPANYING TECHNICAL REPORT ON DRAFT OVERARCHING STANDARD EPB (PREN 15603) |
EN 12897:2016 | Water supply - Specification for indirectly heated unvented (closed) storage water heaters |
PREN 15316-4-2 : DRAFT 2014 | HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-2: SPACE HEATING GENERATION SYSTEMS, HEAT PUMP SYSTEMS |
EN 15316-3-1:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-1: Domestic hot water systems, characterisation of needs (tapping requirements) |
92/42/EEC : 1992 AMD 5 2013 | COUNCIL DIRECTIVE 92/42/EEC OF 21 MAY 1992 ON EFFICIENCY REQUIREMENTS FOR NEW HOT-WATER BOILERS FIRED WITH LIQUID OR GASEOUS FUELS |
EN 15316-3-2:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-2: Domestic hot water systems, distribution |
EN 60379:2004 | Methods for measuring the performance of electric storage water-heaters for household purposes |
ISO 13790:2008 | Energy performance of buildings Calculation of energy use for space heating and cooling |
PREN 15603 : DRAFT 2013 | ENERGY PERFORMANCE OF BUILDINGS - OVERARCHING STANDARD EPBD |
EN 15316-4-5:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5 |
EN 15316-2-3:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-3: Space heating distribution systems |
EN 625:1995 | Gas-fired central heating boilers - Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.