EN 1540:2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Workplace exposure - Terminology
Superseded date
14-01-2022
Superseded by
Published date
14-12-2011
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 General terms
3 Terms related to the physical and chemical
processes of air sampling
4 Terms related to the analytical method
5 Terms related to method performance
Annex A (informative) - Trilingual alphabetical index
of terms defined
Bibliography
This European Standard specifies terms and definitions that are related to the assessment of workplace exposure to chemical and biological agents. These are either general terms or are specific to physical and chemical processes of air sampling, the analytical method or method performance.The terms included are those that have been identified as being fundamental because their definition is necessary to avoid ambiguity and ensure consistency of use.
| Committee |
CEN/TC 137
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN 1540 : 2012 | Identical |
| PN EN 1540 : 2012 | Identical |
| UNE-EN 1540:2012 | Identical |
| NS EN 1540 : 2011 | Identical |
| DIN EN 1540:2012-03 | Identical |
| I.S. EN 1540:2011 | Identical |
| NBN EN 1540 : 2012 | Identical |
| SN EN 1540:2012 | Identical |
| BS EN 1540:2011 | Identical |
| NEN EN 1540 : 2011 | Identical |
| UNI EN 1540 : 2012 | Identical |
| ONORM EN 1540 : 2012 | Identical |
| 09/30165942 DC : 0 | BS ISO 21438-3 - WORKPLACE ATMOSPHERES - DETERMINATION OF INORGANIC ACIDS BY ION CHROMATOGRAPHY - PART 3: HYDROFLUORIC ACID AND PARTICULATE FLUORIDES |
| BS EN 15051-3:2013 | Workplace exposure. Measurement of the dustiness of bulk materials Continuous drop method |
| 12/30259166 DC : 0 | BS EN 13205-2 - WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST, BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| 16/30325183 DC : 0 | BS EN 689 - WORKPLACE EXPOSURE - MEASUREMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS - STRATEGY FOR TESTING COMPLIANCE WITH OCCUPATIONAL EXPOSURE LIMIT VALUES |
| I.S. EN 13205:2002 | WORKPLACE ATMOSPHERES - ASSESSMENT OF PERFORMANCE OF INSTRUMENTS FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS |
| 04/19971117 DC : DRAFT AUG 2004 | BS EN ISO 15011-4 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES GENERATED BY ARC WELDING - PART 4: FUME DATA SHEETS |
| BS ISO 21438-3:2010 | Workplace atmospheres. Determination of inorganic acids by ion chromatography Hydrofluoric acid and particulate fluorides |
| UNI EN ISO 15011-4 : 2009 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 4: FUME DATA SHEETS |
| 03/303614 DC : DRAFT MAR 2003 | BS ISO 15202-3 - WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY - PART 3: ANALYSIS |
| DIN EN 13205-5:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 5: AEROSOL SAMPLER PERFORMANCE TEST AND SAMPLER COMPARISON CARRIED OUT AT WORKPLACES |
| 05/30133024 DC : DRAFT APR 2005 | EN 482 - WORKPLACE ATMOSPHERES - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| 09/30170490 DC : DRAFT MAY 2009 | BS ISO 28439 - WORKPLACE ATMOSPHERES - CHARACTERIZATION OF ULTRAFINE AEROSOLS/NANOAEROSOLS - DETERMINING THE SIZE DISTRIBUTION AND NUMBER CONCENTRATION USING DIFFERENTIAL ELECTRICAL MOBILITY ANALYSING SYSTEMS |
| 15/30317318 DC : 0 | BS EN 16897 - WORKPLACE EXPOSURE - CHARACTERIZATION OF ULTRAFINE AEROSOLS/NANOAEROSOLS - DETERMINATION OF NUMBER CONCENTRATION USING CONDENSATION PARTICLE COUNTERS |
| BS ISO 8518:2001 | Workplace air. Determination of particulate lead and lead compounds. Flame or electrothermal atomic absorption spectrometric method |
| BS EN 13205-6:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations Transport and handling tests |
| BS EN 15051-1:2013 | Workplace exposure. Measurement of the dustiness of bulk materials Requirements and choice of test methods |
| BS EN 13205-1:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations General requirements |
| BS ISO 21438-1:2007 | Workplace atmospheres. Determination of inorganic acids by ion chromatography Part 1: Non-volatile acids (sulfuric acid and phosphoric acid) |
| ASTM D 4856 : 2011 | Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis) |
| EN 14031:2003 | Workplace atmospheres - Determination of airborne endotoxins |
| ISO 20552:2007 | Workplace air — Determination of mercury vapour — Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry |
| I.S. EN 13205-4:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST BASED ON COMPARISON OF CONCENTRATIONS |
| I.S. EN 689:1995 | WORKPLACE EXPOSURE - MEASUREMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS - STRATEGY FOR TESTING COMPLIANCE WITH OCCUPATIONAL EXPOSURE LIMIT VALUES |
| I.S. EN 13205-5:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 5: AEROSOL SAMPLER PERFORMANCE TEST AND SAMPLER COMPARISON CARRIED OUT AT WORKPLACES |
| CEN ISO/TS 21623:2018 | Workplace exposure - Assessment of dermal exposure to nano-objects and their aggregates and agglomerates (NOAA) (ISO/TS 21623:2017) |
| ASTM E 1370 : 2014 : REDLINE | Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
| ASTM D 1356 : 2017 : REDLINE | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 7659 : 2010 | Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection |
| ISO 8518:2001 | Workplace air — Determination of particulate lead and lead compounds — Flame or electrothermal atomic absorption spectrometric method |
| BS EN 14530:2004 | Workplace atmospheres. Determination of diesel particulate matter. General requirements |
| BS EN 14031:2003 | Workplace atmospheres. Determination of airborne endotoxins |
| BS EN ISO 10882-1:2011 | Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator\'s breathing zone Sampling of airborne particles |
| UNE-EN 15051-1:2014 | Workplace exposure - Measurement of the dustiness of bulk materials - Part 1: Requirements and choice of test methods |
| I.S. EN 838:2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| EN 13205-1:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements |
| EN 13205-4:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations |
| EN 13205-5:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces |
| EN 13205:2001 | Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations |
| EN 1076:2009 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
| CEN/TS 15279:2006 | Workplace exposure - Measurement of dermal exposure - Principles and methods |
| EN 13890:2009 | Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods |
| NF EN 838 : 2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| 08/30172854 DC : DRAFT SEP 2008 | BS ISO 21438-2 - WORKPLACE ATMOSPHERES - DETERMINATION OF INORGANIC ACIDS BY ION CHROMATOGRAPHY - PART 2: VOLATILE ACIDS, EXCEPT HYDROFLUORIC ACID (HYDROCHLORIC ACID, HYDROBROMIC ACID AND NITRIC ACID) |
| DIN EN ISO 13137:2014-03 | Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013) |
| 10/30213522 DC : DRAFT JUNE 2010 | BS ISO 15202-2 - WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY - PART 2: SAMPLE PREPARATION |
| UNI EN 13205-2 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| 12/30258004 DC : 0 | BS ISO 17091 - WORKPLACE AIR - DETERMINATION OF LITHIUM HYDROXIDE, SODIUM HYDROXIDE, POTASSIUM HYDROXIDE AND CALCIUM DIHYDROXIDE - METHOD BY MEASUREMENT OF CORRESPONDING CATIONS BY SUPPRESSED ION CHROMATOGRAPHY |
| BS EN ISO 28439:2011 | Workplace atmospheres. Characterization of ultrafine aerosols/nanoaerosols. Determination of the size distribution and number concentration using differential electrical mobility analysing systems |
| 16/30323504 DC : DRAFT JAN 2016 | BS EN 16966 - WORKPLACE EXPOSURE - METRICS TO BE USED FOR THE MEASUREMENTS OF EXPOSURE TO INHALED NANOPARTICLES (NANO-OBJECTS AND NANOSTRUCTURED MATERIALS) SUCH AS MASS CONCENTRATION, NUMBER CONCENTRATION AND SURFACE AREA CONCENTRATION |
| 02/563798 DC : DRAFT SEP 2002 | PREN 14530 - WORKPLACE ATMOSPHERES - DETERMINATION OF DIESEL PARTICULATE MATTER - GENERAL REQUIREMENTS |
| 13/30231417 DC : 0 | BS ISO 16258-2 - WORKPLACE AIR - RESPIRABLE CRYSTALLINE SILICA BY X-RAY DIFFRACTION - PART 2: METHOD BY INDIRECT ANALYSIS |
| ISO/TR 19601:2017 | Nanotechnologies — Aerosol generation for air exposure studies of nano-objects and their aggregates and agglomerates (NOAA) |
| BS EN 13205-5:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations Aerosol sampler performance test and sampler comparison carried out at workplaces |
| BS ISO 18158:2016 | Workplace air. Terminology |
| UNE-EN 13936:2014 | Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods |
| BS ISO 16258-2:2015 | Workplace air. Analysis of respirable crystalline silica by X-ray diffraction Method by indirect analysis |
| BS EN 13205-4:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations Laboratory performance test based on comparison of concentrations |
| 12/30259160 DC : DRAFT JULY 2012 | BS EN 13936 - WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING A CHEMICAL AGENT PRESENT AS A MIXTURE OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
| BS ISO 24095:2009 | Workplace air. Guidance for the measurement of respirable crystalline silica |
| DD ENV 13936:2001 | Workplace atmospheres. Measurement of chemical agents present as mixtures of airborne particles and vapour. Requirements and test methods |
| 05/30124529 DC : DRAFT AUG 2005 | ISO 20552 - WORKPLACE AIR - DETERMINATION OF MERCURY VAPOUR - METHOD USING GOLD-AMALGAM COLLECTION AND ANALYSIS BY ATOMIC ABSORPTION SPECTROMETRY OR ATOMIC FLUORESCENCE SPECTROMETRY |
| BS ISO 20552:2007 | Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry |
| BS ISO 16740:2005 | Workplace air. Determination of hexavalent chromium in airborne particulate matter. Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide |
| 08/30163829 DC : DRAFT JAN 2008 | BS EN 1076 - WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| 12/30212889 DC : 0 | BS ISO 13137 - WORKPLACE ATMOSPHERES - PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AND BIOLOGICAL AGENTS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13205-2:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| ISO 15202-1:2012 | Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 1: Sampling |
| CEN/TR 15278:2006 | Workplace exposure - Strategy for the evaluation of dermal exposure |
| DIN EN 13205-4 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST BASED ON COMPARISON OF CONCENTRATIONS |
| CEN/TR 13205-3:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data |
| ISO 16258-2:2015 | Workplace air Analysis of respirable crystalline silica by X-ray diffraction Part 2: Method by indirect analysis |
| I.S. CEN/TR 15230:2005 | WORKPLACE ATMOSPHERES - GUIDANCE FOR SAMPLING OF INHALABLE, THORACIC AND RESPIRABLE AEROSOL FRACTIONS |
| ISO 15011-4:2017 | Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 4: Fume data sheets |
| ISO 18158:2016 | Workplace air Terminology |
| ASTM D 7822 : 2013 | Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids |
| S.R. EN 16897:2017 | WORKPLACE EXPOSURE - CHARACTERIZATION OF ULTRAFINE AEROSOLS/NANOAEROSOLS - DETERMINATION OF NUMBER CONCENTRATION USING CONDENSATION PARTICLE COUNTERS |
| DIN EN ISO 15011-4:2009-07 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 4: FUME DATA SHEETS |
| PREN 689 : DRAFT 2016 | WORKPLACE EXPOSURE - MEASUREMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS - STRATEGY FOR TESTING COMPLIANCE WITH OCCUPATIONAL EXPOSURE LIMIT VALUES |
| UNE-EN ISO 13137:2014 | Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013) |
| UNI EN 13936 : 2014 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING A CHEMICAL AGENT PRESENT AS A MIXTURE OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
| ASTM D 7659 : 2010 : R2015 | Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection |
| ASTM D 7439 : 2014 : REDLINE | Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry |
| I.S. EN 13205-2:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| PREN 16966 : DRAFT 2016 | WORKPLACE EXPOSURE - METRICS TO BE USED FOR THE MEASUREMENTS OF EXPOSURE TO INHALED NANOPARTICLES (NANO-OBJECTS AND NANOSTRUCTURED MATERIALS) SUCH AS MASS CONCENTRATION, NUMBER CONCENTRATION AND SURFACE AREA CONCENTRATION |
| PREN 17199-4 : DRAFT 2017 | WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 4: SMALL ROTATING DRUM METHOD |
| ISO 21438-1:2007 | Workplace atmospheres Determination of inorganic acids by ion chromatography Part 1: Non-volatile acids (sulfuric acid and phosphoric acid) |
| ISO 15202-2:2012 | Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 2: Sample preparation |
| DIN EN 1076:2010-04 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
| UNE-EN 15051-3:2014 | Workplace exposure - Measurement of the dustiness of bulk materials - Part 3: Continuous drop method |
| BS EN 13890:2009 | Workplace exposure. Procedures for measuring metals and metalloids in airborne particles. Requirements and test methods |
| I.S. EN 482:2012 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| I.S. EN 13890:2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 9999:2016 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - CLASSIFICATION AND TERMINOLOGY |
| I.S. EN ISO 10882-1:2011 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR'S BREATHING ZONE - PART 1: SAMPLING OF AIRBORNE PARTICLES (ISO 10882-1:2011) |
| I.S. EN 14042:2003 | WORKPLACE ATMOSPHERES - GUIDE FOR THE APPLICATION AND USE OF PROCEDURES FOR THE ASSESSMENT OF EXPOSURE TO CHEMICAL AND BIOLOGICAL AGENTS |
| UNI EN 838 : 2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13205-5 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 5: AEROSOL SAMPLER PERFORMANCE TEST AND SAMPLER COMPARISON CARRIED OUT AT WORKPLACES |
| I.S. EN ISO 13137:2013 | WORKPLACE ATMOSPHERES - PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AND BIOLOGICAL AGENTS - REQUIREMENTS AND TEST METHODS (ISO 13137:2013) |
| BS ISO 16258-1:2015 | Workplace air. Analysis of respirable crystalline silica by X-ray diffraction Direct-on-filter method |
| BS EN 13936:2014 | Workplace exposure. Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour. Requirements and test methods |
| 12/30259174 DC : 0 | BS EN 13205-5 - WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 5: AEROSOL SAMPLER PERFORMANCE TEST AND SAMPLER COMPARISON, CARRIED OUT AT WORKPLACES |
| ISO 24095:2009 | Workplace air Guidance for the measurement of respirable crystalline silica |
| PD ISO/TR 19601:2017 | Nanotechnologies. Aerosol generation for air exposure studies of nano-objects and their aggregates and agglomerates (NOAA) |
| 18/30353364 DC : 0 | BS EN 17199-3 - WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 3: CONTINUOUS DROP METHOD |
| 10/30219214 DC : 0 | BS ISO 15202-1 - WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY - PART 1: SAMPLING |
| UNI EN 13205-6 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 6: TRANSPORT AND HANDLING TESTS |
| 08/30172873 DC : DRAFT JULY 2008 | BS EN 838 - WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| 11/30252476 DC : 0 | BS EN 15051-3 - WORKPLACE ATMOSPHERES - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 3: CONTINUOUS DROP METHOD |
| DIN EN 13205-6 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 6: TRANSPORT AND HANDLING TESTS |
| ISO 15202-3:2004 | Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 3: Analysis |
| 14/30296739 DC : 0 | BS EN 482:2012/A1 - WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| BS EN ISO 13137:2013 | Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods |
| BS EN 13205-2:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations Laboratory performance test based on determination of sampling efficiency |
| 15/30296032 DC : 0 | BS EN ISO 9999 - ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - CLASSIFICATION AND TERMINOLOGY |
| I.S. CEN TS 15279:2006 | WORKPLACE EXPOSURE - MEASUREMENT OF DERMAL EXPOSURE - PRINCIPLES AND METHODS |
| DD CEN/TS 15279:2006 | Workplace exposure. Measurement of dermal exposure. Principles and methods |
| UNE-EN ISO 17621:2016 | Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO 17621:2015) |
| UNE-EN ISO 28439:2011 | Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential electrical mobility analysing systems (ISO 28439:2011) |
| BS ISO 8672:2014 | Air quality. Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy. Membrane filter method |
| DIN EN 15051-3:2014-03 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 3: CONTINUOUS DROP METHOD |
| 02/562450 DC : DRAFT MAY 2002 | BS EN 14412 - INDOOR AIR QUALITY - DIFFUSIVE SAMPLERS FOR THE DETERMINATION OF CONCENTRATION OF GASES AND VAPOURS - GUIDE FOR SELECTION, USE AND MAINTENANCE |
| DIN EN ISO 17621:2015-12 | WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015) |
| BS EN 16897:2017 | Workplace exposure. Characterization of ultrafine aerosols/nanoaerosols. Determination of number concentration using condensation particle counters |
| DIN EN 15051-1:2014-03 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 1: REQUIREMENTS AND CHOICE OF TEST METHODS |
| DIN EN 13205-1:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| ISO 21438-3:2010 | Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 3: Hydrofluoric acid and particulate fluorides |
| UNE-EN 13205-6:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests |
| UNE-EN 13205-5:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces |
| I.S. EN ISO 17621:2015 | WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015) |
| I.S. EN ISO 15011-4:2018 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 4: FUME DATA SHEETS (ISO 15011-4:2017) |
| S.R. CEN ISO/TS 21623:2018 | WORKPLACE EXPOSURE - ASSESSMENT OF DERMAL EXPOSURE TO NANO-OBJECTS AND THEIR AGGREGATES AND AGGLOMERATES (NOAA) (ISO/TS 21623:2017) |
| CEN/TR 15230:2005 | Workplace atmospheres - Guidance for sampling of inhalable, thoracic and respirable aerosol fractions |
| ISO 17091:2013 | Workplace air — Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide — Method by measurement of corresponding cations by suppressed ion chromatography |
| DIN EN ISO 10882-1:2012-01 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator\'s breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| DIN EN 482:2015-12 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents (includes Amendment A1:2015) |
| DIN EN 13890:2010-01 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
| BS EN 1076:2009 | Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods |
| ISO 9999:2016 | Assistive products for persons with disability Classification and terminology |
| UNE-EN ISO 10882-1:2012 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| ISO 14123-1:2015 | Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers |
| EN 14412:2004 | Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance |
| ENV 13936 : DRAFT 2001 | WORKPLACE ATMOSPHERES - MEASUREMENT OF CHEMICAL AGENTS PRESENT AS MIXTURES OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
| UNI EN 1076 : 2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 15051-1 : 2014 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 1: REQUIREMENTS AND CHOICE OF TEST METHODS |
| UNI EN ISO 10882-1 : 2012 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR'S BREATHING ZONE - PART 1: SAMPLING OF AIRBORNE PARTICLES |
| UNI EN 15051-3 : 2014 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 3: CONTINUOUS DROP METHOD |
| UNI EN 13890 : 2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
| ISO 16200-1:2001 | Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography — Part 1: Pumped sampling method |
| UNE-EN 13205-2:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency |
| ISO 8672:2014 | Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy — Membrane filter method |
| I.S. EN ISO 28439:2011 | WORKPLACE ATMOSPHERES - CHARACTERIZATION OF ULTRAFINE AEROSOLS/NANOAEROSOLS - DETERMINATION OF THE SIZE DISTRIBUTION AND NUMBER CONCENTRATION USING DIFFERENTIAL ELECTRICAL MOBILITY ANALYSING SYSTEMS |
| 02/564413 DC : DRAFT OCT 2002 | PREN 14583 - WORKPLACE ATMOSPHERES - VOLUMETRIC BIOAEROSOL SAMPLING DEVICES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 28439:2011-07 | Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential electrical mobility analysing systems (ISO 28439:2011) |
| 12/30259163 DC : 0 | BS EN 13205-1 - WORKPLACE EXPOSURE - ASSESSMENT OF PERFORMANCE OF INSTRUMENTS FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| BS ISO 21438-2:2009 | Workplace atmospheres. Determination of inorganic acids by ion chromatography Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) |
| BS ISO 11041:1996 | Workplace air. Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour. Method by hydride generation and atomic absorption spectrometry |
| ISO/TS 21623:2017 | Workplace exposure — Assessment of dermal exposure to nano-objects and their aggregates and agglomerates (NOAA) |
| 09/30165939 DC : 0 | BS ISO 30011 - WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY |
| PD CEN/TR 15278:2006 | Workplace exposure. Strategy for the evaluation of dermal exposure |
| PD CEN/TR 15230:2005 | Workplace atmospheres. Guidance for sampling of inhalable, thoracic and respirable aerosol fractions |
| 15/30269207 DC : 0 | BS ISO 18158 - WORKPLACE AIR - TERMINOLOGY |
| UNI EN ISO 28439 : 2011 | WORKPLACE ATMOSPHERES - CHARACTERIZATION OF ULTRAFINE AEROSOLS/NANOAEROSOLS - DETERMINATION OF THE SIZE DISTRIBUTION AND NUMBER CONCENTRATION USING DIFFERENTIAL ELECTRICAL MOBILITY ANALYSING SYSTEMS |
| 11/30252268 DC : 0 | BS EN 15051-1 - WORKPLACE EXPOSURES - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 1: REQUIREMENTS AND CHOICE OF TEST METHODS |
| BS ISO 15202-3:2004 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Analysis |
| BS EN ISO 17621:2015 | Workplace atmospheres. Short term detector tube measurement systems. Requirements and test methods |
| BS ISO 16200-1:2001 | Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography Pumped sampling method |
| S.R. CEN/TR 13205-3:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 3: ANALYSIS OF SAMPLING EFFICIENCY DATA |
| UNI EN 13205-1 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 13205-1 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 13936:2014 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING A CHEMICAL AGENT PRESENT AS A MIXTURE OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
| PREN 17199-3 : DRAFT 2017 | WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 3: CONTINUOUS DROP METHOD |
| ISO 16200-2:2000 | Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography — Part 2: Diffusive sampling method |
| I.S. EN 14031:2003 | WORKPLACE ATMOSPHERES - DETERMINATION OF AIRBORNE ENDOTOXINS |
| I.S. EN 15051-2:2013 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 2: ROTATING DRUM METHOD |
| DIN EN 16897:2015-09 (Draft) | WORKPLACE EXPOSURE - CHARACTERIZATION OF ULTRAFINE AEROSOLS/NANOAEROSOLS - DETERMINATION OF NUMBER CONCENTRATION USING CONDENSATION PARTICLE COUNTERS |
| ISO/TR 14294:2011 | Workplace atmospheres Measurement of dermal exposure Principles and methods |
| I.S. EN ISO 14123-1:2015 | SAFETY OF MACHINERY - REDUCTION OF RISKS TO HEALTH RESULTING FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 1: PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS (ISO 14123-1:2015) |
| BS ISO 15202-1:2012 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Sampling |
| ISO 21438-2:2009 | Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) |
| ISO 17733:2015 | Workplace air Determination of mercury and inorganic mercury compounds Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
| ISO 16740:2005 | Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide |
| DIN EN 838:2010-05 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| ISO 10882-1:2011 | Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles |
| DIN EN ISO 9999:2015-09 (Draft) | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - CLASSIFICATION AND TERMINOLOGY (ISO 9999:2016) |
| BS EN 14042:2003 | Workplace atmospheres. Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
| BS EN 482 : 2012 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| UNE-EN 482:2012 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
| ISO 17621:2015 | Workplace atmospheres Short term detector tube measurement systems Requirements and test methods |
| ISO 13137:2013 | Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods |
| BS EN ISO 10882-2:2000 | Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator\'s breathing zone Sampling of gases |
| BS EN 838:2010 | Workplace exposure. Procedures for measuring gases and vapours using diffusive samplers. Requirements and test methods |
| ISO 28439:2011 | Workplace atmospheres Characterization of ultrafine aerosols/nanoaerosols Determination of the size distribution and number concentration using differential electrical mobility analysing systems |
| BS EN 14412:2004 | Indoor air quality. Diffusive samplers the determination of concentrations of gases and vapours. Guide for selection, use and maintenance |
| BS EN ISO 9999:2016 | Assistive products for persons with disability. Classification and terminology |
| UNE-EN ISO 9999:2017 | Assistive products for persons with disability - Classification and terminology (ISO 9999:2016) |
| I.S. EN 1076:2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| EN 14530:2004 | Workplace atmospheres - Determination of diesel particulate matter - General requirements |
| EN ISO 10882-2:2000 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000) |
| EN ISO 14123-1:2015 | Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1:2015) |
| EN ISO 10882-1:2011 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| EN 15051-1:2013 | Workplace exposure - Measurement of the dustiness of bulk materials - Part 1: Requirements and choice of test methods |
| EN 14042:2003 | Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
| EN ISO 9999:2016 | Assistive products for persons with disability - Classification and terminology (ISO 9999:2016) |
| EN 13936:2014 | Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods |
| EN 16897:2017 | Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters |
| EN ISO 28439:2011 | Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential electrical mobility analysing systems (ISO 28439:2011) |
| EN 15051-3:2013 | Workplace exposure - Measurement of the dustiness of bulk materials - Part 3: Continuous drop method |
| EN 15051-2:2013+A1:2016 | Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method |
| EN 838:2010 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| BS ISO 11174:1996 | Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electro-thermal atomic absorption spectrometric method |
| DIN EN 13936:2014-04 | Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods |
| BS EN ISO 14123-1:2015 | Safety of machinery. Reduction of risks to health resulting from hazardous substances emitted by machinery Principles and specifications for machinery manufacturers |
| DIN EN 13205-2 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| PD ISO/TR 14294:2011 | Workplace atmospheres. Measurement of dermal Exposure. Principles and methods |
| UNE-EN 13205-4:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations |
| BS ISO 15202-2:2012 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Sample preparation |
| BS ISO 17091:2013 | Workplace air. Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide. Method by measurement of corresponding cations by suppressed ion chromatography |
| UNE-EN ISO 14123-1:2016 | Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1:2015) |
| PD CEN/TR 13205-3:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations Analysis of sampling efficiency data |
| BS ISO 30011:2010 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry |
| 12/30259177 DC : 0 | BS EN 13205-6 - WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 6: TRANSPORT AND HANDLING TESTS |
| 16/30288734 DC : 0 | BS ISO 19087 - WORKPLACE AIR - ANALYSIS OF RESPIRABLE CRYSTALLINE SILICA BY FOURIER-TRANSFORM INFRARED SPECTROSCOPY |
| 08/30165924 DC : DRAFT JAN 2008 | BS ISO 24095 - WORKPLACE AIR - GUIDANCE FOR THE MEASUREMENT OF RESPIRABLE CRYSTALLINE SILICA |
| DIN EN ISO 14123-1:2016-03 | SAFETY OF MACHINERY - REDUCTION OF RISKS TO HEALTH RESULTING FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 1: PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS (ISO 14123-1:2015) |
| 18/30353370 DC : 0 | BS EN 17199-4 - WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 4: SMALL ROTATING DRUM METHOD |
| I.S. EN 13205-1:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 13205-6:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 6: TRANSPORT AND HANDLING TESTS |
| 12/30259171 DC : 0 | BS EN 13205-4 - WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST, BASED ON COMPARISON OF CONCENTRATIONS |
| BS ISO 16200-2:2000 | Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography Diffusive sampling method |
| BS ISO 17733:2004 | Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
| ISO 30011:2010 | Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry |
| UNE-EN 13205-1:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements |
| DIN EN 13205-4:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST BASED ON COMPARISON OF CONCENTRATIONS |
| UNI EN 13205-4 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST BASED ON COMPARISON OF CONCENTRATIONS |
| I.S. EN 15051-3:2013 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 3: CONTINUOUS DROP METHOD |
| BS EN 15051-2 : 2013 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 2: ROTATING DRUM METHOD |
| ISO 16258-1:2015 | Workplace air Analysis of respirable crystalline silica by X-ray diffraction Part 1: Direct-on-filter method |
| UNI EN 13205-5 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 5: AEROSOL SAMPLER PERFORMANCE TEST AND SAMPLER COMPARISON CARRIED OUT AT WORKPLACES |
| EN ISO 15011-4:2018 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2017) |
| I.S. CEN TR 15278:2006 | WORKPLACE EXPOSURE - STRATEGY FOR THE EVALUATION OF DERMAL EXPOSURE |
| I.S. EN 13205-6:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 6: TRANSPORT AND HANDLING TESTS |
| I.S. EN 15051-1:2013 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 1: REQUIREMENTS AND CHOICE OF TEST METHODS |
| EN 689:2018 | Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values |
| ASTM D 6785 : 2013 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM D 4856 : 2011 : R2016 | Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis) |
| BS EN 14583:2004 | Workplace atmospheres. Volumetric bioaerosol sampling devices. Requirements and test methods |
| BS EN 13205:2002 | Workplace atmospheres. Assessment of performance of instruments for measurement of airborne particle concentrations |
| ISO 10882-2:2000 | Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 2: Sampling of gases |
| EN 482:2012+A1:2015 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
| EN ISO 13137:2013 | Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013) |
| DIN EN 14031:2003-06 | Workplace atmospheres - Determination of airborne endotoxins |
| DIN EN 14583:2004-12 | Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods |
| DIN EN 16897:2017-09 | WORKPLACE EXPOSURE - CHARACTERIZATION OF ULTRAFINE AEROSOLS/NANOAEROSOLS - DETERMINATION OF NUMBER CONCENTRATION USING CONDENSATION PARTICLE COUNTERS |
| EN ISO 17621:2015 | Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO 17621:2015) |
| EN 13205-6:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests |
| I.S. EN 14583:2004 | WORKPLACE ATMOSPHERES - VOLUMETRIC BIOAEROSOL SAMPLING DEVICES - REQUIREMENTS AND TEST METHODS |
| DIN EN 14530:2004-06 | Workplace atmospheres - Determination of diesel particulate matter - General requirements |
| EN 13205-2:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency |
| EN 14583:2004 | Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods |
| DIN EN 14412:2004-12 | INDOOR AIR QUALITY - DIFFUSIVE SAMPLERS FOR THE DETERMINATION OF CONCENTRATIONS OF GASES AND VAPOURS - GUIDE FOR SELECTION, USE AND MAINTENANCE |
| DIN EN ISO 9999:2017-03 | Assistive products for persons with disability - Classification and terminology (ISO 9999:2016) |
| DIN EN 14042:2003-07 | WORKPLACE ATMOSPHERES - GUIDE FOR THE APPLICATION AND USE OF PROCEDURES FOR THE ASSESSMENT OF EXPOSURE TO CHEMICAL AND BIOLOGICAL AGENTS |
| UNE-EN 15051-2:2014 | Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method |
| I.S. EN ISO 10882-2:2000 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR'S BREATHING ZONE - PART 2: SAMPLING OF GASES |
| EN 481:1993 | Workplace atmospheres - Size fraction definitions for measurement of airborne particles |
| ISO 4225:1994 | Air quality General aspects Vocabulary |
| EN 1076:2009 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
| EN 482:2012+A1:2015 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
| AS/NZS 4024.1302:2019 | Safety of machinery Risk assessment - Reduction of risks to health from hazardous substances emitted by machinery - Principles and specifications for machinery manufacturers |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.