EN 15860:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
Superseded date
29-06-2019
Superseded by
Published date
23-06-2010
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials
5 Requirements
6 Test methods
7 Designation
8 Marking
Annex A (normative) - Procedure for the determination of
microporosity in semi-finished products
Annex B (normative) - Tables for the conversion of deflection
values (straightness)
Annex C (informative) - Examples of calculation of dimensional
stability after heat treatment
Bibliography
This European Standard specifies the requirements and associated test methods that apply to semifinished products such as rods, hollow bars and plates made from thermoplastic materials. These semifinished products are used predominantly for the manufacture of finished parts by means of machining.
| Committee |
CEN/TC 249
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DS EN 15860 : 2010 | Identical |
| DS EN 15860:2018 | Identical |
| BS EN 15860:2010 | Identical |
| PN EN 15860 : 2010 | Identical |
| UNI EN 15860 : 2018 | Identical |
| DIN EN 15860:2018-09 | Identical |
| NF EN 15860 : 2010 | Identical |
| ONORM EN 15860 : 2012 | Identical |
| NEN EN 15860 : 2010 | Identical |
| ÖNORM EN 15860:2019 | Identical |
| UNE-EN 15860:2011 | Identical |
| DIN EN 15860:2016-07 (Draft) | Identical |
| NEN EN 15860:2018 | Identical |
| I.S. EN 15860:2010 | Identical |
| NS EN 15860 : 2010 | Identical |
| BS EN 15860:2018 | Identical |
| UNI EN 15860 : 2010 | Identical |
| NBN EN 15860 : 2010 | Identical |
| I.S. EN 15860:2018 | Identical |
| SN EN 15860 : 2010 | Identical |
| VDI 2736 Blatt 1:2016-07 | Thermoplastic gear wheels - Materials, material selection, production methods, production tolerances, form design |
| ISO 15014:2007 | Plastics Extruded sheets of poly(vinylidene fluoride) (PVDF) Requirements and test methods |
| ISO 1163-1:1995 | Plastics Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 12086-1:2006 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 1: Designation system and basis for specifications |
| EN ISO 15103-1:2004 | Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 15103-1:2000) |
| ISO 1874-1:2010 | Plastics Polyamide (PA) moulding and extrusion materials Part 1: Designation system and basis for specification |
| EN ISO 1874-1:2010 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO 1874-1:2010) |
| EN ISO 11357-1:2016 | Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016) |
| ISO 11963:2012 | Plastics Polycarbonate sheets Types, dimensions and characteristics |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| ISO 1873-1:1995 | Plastics Polypropylene (PP) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 1628-5:1998 | Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 5: Thermoplastic polyester (TP) homopolymers and copolymers |
| ISO 10350-1:2017 | Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials |
| EN ISO 1163-1:1999 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995) |
| EN ISO 2818:1996 | Plastics - Preparation of test specimens by machining (ISO 2818:1994) |
| EN ISO 11542-1:2001 | Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001) |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| EN ISO 7391-1:2006 | Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:2006) |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 11357-3:2011 | Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
| ISO 11357-2:2013 | Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
| ISO 9988-1:2004 | Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 7792-1:2012 | Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| EN ISO 2580-1:2002 | Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002) |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 11542-1:2001 | Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 1183-2:2004 | Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method |
| ISO 15103-1:2000 | Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 307:2007 | Plastics Polyamides Determination of viscosity number |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| EN ISO 11963:2012 | Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012) |
| ISO 7391-1:2006 | Plastics Polycarbonate (PC) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| EN ISO 9988-1:2006 | Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 9988-1:2004) |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| ISO 1872-1:1993 | Plastics Polyethylene (PE) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 15527:2010 | Plastics Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) Requirements and test methods |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| EN ISO 1872-1:1999 | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1872-1:1993) |
| EN ISO 1133:2005 | Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005) |
| ISO 2580-1:2002 | Plastics Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| EN ISO 1873-1:1995 | Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995) |
| ISO 11357-1:2016 | Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| EN ISO 306:2013 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| EN ISO 7792-1:2012 | Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7792-1:2012) |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| EN ISO 1183-2:2004 | Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.