EN 16020:2011
Current
The latest, up-to-date edition.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Explosion Diverters
5 Verification of efficacy and mechanical integrity
of the diverter by experimental testing
6 Test Report
7 Information for use
8 Marking
Annex A (normative) - Constructional design of
pipe-in-pipe diverters
Annex B (informative) - Explosion diverter types
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of
EU Directive 94/9/EC
Bibliography
An explosion diverter is used to divert explosions propagating through ducts, thus preventing flame jet ignition and pressure piling in connected protected enclosures. It will reduce the risk of flame transmission.This European Standard describes the basic design of a pipe-in-pipe diverter and specifies the testing requirements and the application of explosion diverters. This European Standard covers:- a test method for assessing the efficacy of explosion diverters;- design rules for a type of pipe-in-pipe diverter;- demands to venting device on diverter;- installation requirements;- maintenance requirements;- marking.This European Standard considers dust/air explosive atmospheres only.
| Committee |
CEN/TC 305
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN 16020:2011 | Identical |
| UNE-EN 16020:2011 | Identical |
| SN EN 16020 : 2011 | Identical |
| BS EN 16020:2011 | Identical |
| NF EN 16020 : 2011 | Identical |
| NBN EN 16020 : 2011 | Identical |
| NS EN 16020 : 2011 | Identical |
| UNI EN 16020 : 2012 | Identical |
| DIN EN 16020:2011-10 | Identical |
| PN EN 16020 : 2012 | Identical |
| PNE-prEN 16020 | Identical |
| NEN EN 16020 : 2011 | Identical |
| 12/30243081 DC : 0 | BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| 16/30348296 DC : DRAFT DEC 2016 | BS EN 14460 - EXPLOSION RESISTANT EQUIPMENT |
| I.S. EN 1034-17:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| EN 1034-17:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
| EN 12779:2015 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| I.S. EN 14460:2018 | EXPLOSION RESISTANT EQUIPMENT |
| I.S. EN 12779:2015 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS |
| VDI 2263 Blatt 6:2017-08 | Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in dust extracting installations |
| VDI 2263 Blatt 6.1:2017-08 | Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in dust extracting installations - Examples |
| BS EN 1034-17:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Tissue making machines |
| DIN EN 12779:2016-03 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| DIN EN 1034-17:2012-11 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
| EN 14460:2018 | Explosion resistant equipment |
| BS EN 12779:2015 | Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements |
| UNE-EN 12779:2016 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN 15089:2009 | Explosion isolation systems |
| EN 14034-2:2006+A1:2011 | Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
| VDI 3673 Blatt 1:2002-11 | Pressure venting of dust explosions |
| EN 14797:2006 | Explosion venting devices |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| EN 14491:2012 | Dust explosion venting protective systems |
| EN 14034-1:2004+A1:2011 | Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.