EN 16377:2013
Current
The latest, up-to-date edition.
Characterization of waste - Determination of brominated flame retardants (BFR) in solid waste
25-09-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Principle
4 Interference
5 Reagents and standards
6 Equipment
7 Sample pretreatment
8 Procedure
9 Calibration
10 Test report
Annex A (normative) - Clean-up procedures
Annex B (informative) - Examples of separation conditions in
gas chromatography and mass spectrometry
Annex C (informative) - Typical ions and time windows for
electron impact ionisation detection
Annex D (informative) - Examples of chromatograms
Annex E (informative) - Precision data
Annex F (informative) - Summary of general requirements
and recommendations
Bibliography
This European Standard specifies a method for the determination of selected polybrominated flame retardants (BFR), chemically known as polybrominated diphenylethers (BDE), in waste materials using gas chromatography/mass spectrometry (GC-MS) in the electron impact (EI) ionisation mode (GC-EI-MS).When applying GC-EI-MS, the method is applicable to samples containing 100 µg/kg to 5 000 µg/kg of tetra- to octabromodiphenylether congeners and 100 µg/kg to 10 000 µg/kg of decabromo diphenylether (see Table 1). It is also possible to analyse other brominated flame retardants applying the method described in this European Standard, provided the method's applicability has been proven.(...)
Committee |
CEN/TC 444
|
DevelopmentNote |
Supersedes PREN 16377. (10/2013)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
PN EN 16377 : 2014 | Identical |
NEN EN 16377 : 2013 | Identical |
UNE-EN 16377:2014 | Identical |
DIN EN 16377:2013-12 | Identical |
NS EN 16377 : 2013 | Identical |
BS EN 16377:2013 | Identical |
I.S. EN 16377:2013 | Identical |
UNI EN 16377 : 2014 | Identical |
NF EN 16377 : 2013 | Identical |
NBN EN 16377 : 2013 | Identical |
SN EN 16377 : 2013 | Identical |
DIN EN 16694:2015-12 | WATER QUALITY - DETERMINATION OF SELECTED POLYBROMINATED DIPHENLY ETHER (PBDE) IN WHOLE WATER SAMPLES - METHOD USING SOLID PHASE EXTRACTION (SPE) WITH SPE-DISKS COMBINED WITH GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) |
UNE-EN 16694:2016 | Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS) |
13/30291096 DC : 0 | BS EN 16694 - WATER QUALITY - DETERMINATION OF PENTABROMODIPHENYL ETHER (PBDE) IN WHOLE WATER SAMPLES USING SOLID PHASE EXTRACTION (SPE) WITH SPE-DISKS COMBINED WITH GAS CHROMATOGRAPHY - MASS SPECTROMETRY (GC-MS) |
UNI EN 16457 : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
I.S. EN 16457:2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
UNE-EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
DIN EN 16457:2014-07 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
EN 16694:2015 | Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS) |
BS EN 16694:2015 | Water quality. Determination of selected polybrominated diphenly ether (PBDE) in whole water samples. Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS) |
I.S. EN 16694:2015 | WATER QUALITY - DETERMINATION OF SELECTED POLYBROMINATED DIPHENYL ETHER (PBDE) IN WHOLE WATER SAMPLES - METHOD USING SOLID PHASE EXTRACTION (SPE) WITH SPE-DISKS COMBINED WITH GAS CHROMATOGRAPHY - MASS SPECTROMETRY (GC-MS) |
DIN EN 16457 E : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
BS EN 16457:2014 | Characterization of waste. Framework for the preparation and application of a testing programme. Objectives, planning and report |
ISO 22892:2006 | Soil quality Guidelines for the identification of target compounds by gas chromatography and mass spectrometry |
EN 14346:2006 | Characterization of waste - Calculation of dry matter by determination of dry residue or water content |
EN ISO 22032:2009 | Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography/mass spectrometry (ISO 22032:2006) |
ISO 22032:2006 | Water quality — Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge — Method using extraction and gas chromatography/mass spectrometry |
ISO 8466-1:1990 | Water quality Calibration and evaluation of analytical methods and estimation of performance characteristics Part 1: Statistical evaluation of the linear calibration function |
EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
EN ISO 22892:2011 | Soil quality - Guidelines for the identification of target compounds by gas chromatography and mass spectrometry (ISO 22892:2006) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.