EN 16430-1:2014
Current
The latest, up-to-date edition.
Fan assisted radiators, convectors and trench convectors - Part 1: Technical specifications and requirements
17-12-2014
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Pretreatment and coating
5 Dimensional tolerances and pressure
tightness
6 Electrical and mechanical safety for
fan assisted radiators
7 Noise emission
8 Thermal outputs and cooling capacity
9 Catalogue data
10 Marking and labeling
This European Standard defines the technical specifications and requirements of fan assisted radiators, convectors and trench convectors for permanent installation in central heating systems which are factory assembled or kits.This European Standard covers fan assisted radiators and convectors fed with water at temperatures below 120 °C, supplied by a remote heating source.This European Standard also applies for radiators and convectors according to EN 442-1 to determine their dry cooling capacity.This European Standard does not apply to discrete heating appliances.This European Standard also defines the additional common data that the manufacturer is to provide to the trade in order to ensure the correct application of the products.This European Standard applies to the testing for the determination of thermal output and dry cooling capacity of-fan assisted radiators and convectors, provided the heater/cooler has a dedicated fan or fans;-trench convectors with and without fan(s), provided the fan(s) are dedicated;-ventilation radiators and convectors (only heating);-not fan assisted radiators and convectors (only cooling).
| Committee |
CEN/TC 130
|
| DevelopmentNote |
Supersedes PREN 16430-1. (12/2014)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 16430-1:2014 | Identical |
| NS EN 16430-1 : 2014 | Identical |
| NBN EN 16430-1 : 2015 | Identical |
| NEN EN 16430-1 : 2015 | Identical |
| NF EN 16430-1 : 2015 | Identical |
| DIN EN 16430-1:2015-03 | Identical |
| UNI EN 16430-1 : 2015 | Identical |
| I.S. EN 16430-1:2014 | Identical |
| PN EN 16430-1 : 2015 | Identical |
| UNE-EN 16430-1:2015 | Identical |
| SN EN 16430-1 : 2014 | Identical |
| VDI 3805 Blatt 6:2015-07 | Product data exchange in the building services - Radiators, heating and cooling convectors with or without fan |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 12499:1999 | Industrial fans Mechanical safety of fans Guarding |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 442-1:2014 | Radiators and convectors - Part 1: Technical specifications and requirements |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| EN 60335-2-80:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS |
| EN ISO 3741:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
| IEC 62301:2011 | Household electrical appliances - Measurement of standby power |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN 16430-3:2014 | Fan assisted radiators, convectors and trench convectors - Part 3: Test method and rating for cooling capacity |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| EN ISO 12499:2008 | Industrial fans - Mechanical safety of fans - Guarding (ISO 12499:1999) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN ISO 9614-2:1996 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| EN ISO 3743-1:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| EN 442-2:2014 | Radiators and convectors - Part 2: Test methods and rating |
| ISO 3741:2010 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| EN 16430-2:2014 | Fan assisted radiators, convectors and trench convectors - Part 2: Test method and rating for thermal output |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.