EN 302-1:2013
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
Withdrawn date
30-09-2013
Published date
27-03-2013
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Principle
6 Apparatus
7 Method
8 Expression of results
9 Test report
Bibliography
This European Standard specifies a method for determining the shear strength of adhesive bonds in close contact glue line and thick glue line. It is suitable for the following applications:a)for assessing the compliance of adhesives with EN 301, EN 15425 and prEN 16254;b)for assessing the suitability and quality of adhesives for load-bearing timber structures.This test is intended primarily to obtain performance data for the classification of adhesives for load-bearing timber structures according to their suitability for use in defined climatic environments.This method is not intended for use to provide for structural design, and does not necessarily represent the performance of the bonded member in service.
| Committee |
CEN/TC 193
|
| DevelopmentNote |
Supersedes PREN 302-1. (04/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| ONORM EN 302-1 : 2013 | Identical |
| DS EN 302-1 : 2013 | Identical |
| UNE-EN 302-1:2013 | Identical |
| BS EN 302-1:2013 | Identical |
| I.S. EN 302-1:2013 | Identical |
| DIN EN 302-1:2013-06 | Identical |
| NBN EN 302-1 : 2013 | Identical |
| NEN EN 302-1 : 2013 | Identical |
| NF EN 302-1 : 2013 | Identical |
| PN EN 302-1 : 2013 | Identical |
| UNI EN 302-1 : 2013 | Identical |
| NS EN 302-1 : 2013 | Identical |
| SN EN 302-1:2013 | Identical |
| PREN 15497 : DRAFT 2011 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| DIN EN 15425:2015-06 (Draft) | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 15/30296765 DC : 0 | BS EN 15425 - ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 11/30253102 DC : 0 | BS EN 16351 - TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS |
| 03/314568 DC : 0 | EN 14815-1 - ADHESIVES, PHENOLIC AND AMINOPLASTIC FOR FINGER-JOINTS IN LAMELLAE, FOR LOAD-BEARING TIMBER STRUCTURES - PART 1: CLASSIFICATION AND PERFORMANCE |
| UNE-EN 15425:2017 | Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements |
| I.S. EN 301:2017 | ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| UNE-EN 301:2014 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| BS EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of minimum pressing time under referenced conditions |
| EN 12436:2001 | Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements |
| PREN 15416-5 : DRAFT 2015 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| DIN EN 15497:2014-07 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| BS EN 16351:2015 | Timber structures. Cross laminated timber. Requirements |
| PREN 15416-4 : DRAFT 2015 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| BS EN 15425:2017 | Adhesives. One component polyurethane (PUR) for load-bearing timber structures. Classification and performance requirements |
| UNI EN 15497 : 2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| BS EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements |
| DIN EN 15416-5:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| DIN EN 15416-4:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| I.S. EN 15416-4:2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME FOR ONE COMPONENT POLYURETHANE ADHESIVES |
| I.S. EN 302-6:2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| I.S. EN 15416-5:2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF CONVENTIONAL PRESSING TIME |
| EN 16351:2015 | Timber structures - Cross laminated timber - Requirements |
| DIN EN 15416-4:2017-05 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| DIN EN 15416-5:2017-05 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| 11/30237554 DC : 0 | BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS |
| BS EN 15497:2014 | Structural finger jointed solid timber. Performance requirements and minimum production requirements |
| 15/30326222 DC : 0 | BS EN 301 - ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 11/30236369 DC : 0 | BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER |
| ISO/TR 15655:2003 | Fire resistance Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design |
| I.S. EN 15425:2017 | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| DIN EN 302-6:2013-06 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| I.S. EN 14080:2013 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| UNI EN 302-6 : 2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| DIN EN 16351:2015-12 | Timber structures - Cross laminated timber - Requirements |
| BS EN 16254 : 2013 | ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 11/30249114 DC : 0 | BS EN 15497 - STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| DIN EN 15416-5 E : 2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| 15/30296777 DC : 0 | BS EN 15416-4 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| 09/30191937 DC : 0 | BS ISO 20152-1 - TIMBER STRUCTURES - BOND PERFORMANCE OF ADHESIVES - PART 1: BASIC REQUIREMENTS |
| 11/30240279 DC : DRAFT MAR 2011 | BS EN 16254 - ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 09/30193698 DC : DRAFT JAN 2009 | BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED LAMINATED SOLID TIMBER - REQUIREMENTS |
| 15/30296762 DC : 0 | BS EN 15416-5 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| ISO 20152-2:2011 | Timber structures — Bond performance of adhesives — Part 2: Additional requirements |
| PREN 301 : DRAFT 2015 | ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| I.S. EN 16254:2013 | ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| PREN 15425 : DRAFT 2015 | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| UNE-EN 16351:2016 | Timber structures - Cross laminated timber - Requirements |
| BS EN 12436:2002 | Adhesives for load-bearing timber structures. Casein adhesives. Classification and performance requirements |
| BS EN 14080:2013 | Timber structures. Glued laminated timber and glued solid timber. Requirements |
| BS EN 302-6:2013 | Adhesives for load-bearing timber structures. Test methods Determination of the minimum pressing time under referenced conditions |
| UNE-EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| BS EN 14292:2005 | Adhesives. Wood adhesives. Determination of static load resistance with increasing temperature |
| UNE-EN 302-6:2013 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| EN 14292:2005 | Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature |
| EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
| EN 16254:2013+A1:2016 | Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements |
| EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| EN 15497:2014 | Structural finger jointed solid timber - Performance requirements and minimum production requirements |
| EN 15425:2017 | Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements |
| EN 302-6:2013 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
| I.S. EN 15497:2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| I.S. EN 16351:2015 | TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS |
| UNE-EN 15497:2014 | Structural finger jointed solid timber - Performance requirements and minimum production requirements |
| DIN EN 15497 E : 2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| DIN EN 15416-4 E : 2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| ISO 20152-1:2010 | Timber structures — Bond performance of adhesives — Part 1: Basic requirements |
| UNE-EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
| BS EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of open assembly time under referenced conditions |
| DIN EN 14292:2005-09 | Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature; German version EN 14292:2005 |
| DIN EN 15425:2008-06 | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| UNE-EN 16254:2014 | Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| EN 15425:2017 | Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements |
| ISO 5893:2002 | Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification |
| EN 923 : 2015 COR 2016 | ADHESIVES - TERMS AND DEFINITIONS |
| ISO 6344-2:1998 | Coated abrasives Grain size analysis Part 2: Determination of grain size distribution of macrogrits P12 to P220 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.