EN 302-3:2017
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
Withdrawn date
31-03-2018
Published date
06-09-2017
Publisher
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Normative references
3 Principle
4 Apparatus
5 Method
6 Expression of results
7 Test report
Bibliography
This European Standard specifies a method for determining the effect on bond strength of damage to wood fibres caused by the action of acids from the adhesive or primer used in the gluing process during climatic cycling.It is suitable for the following applications:a)for assessing the compliance of adhesives with EN 301, EN 15425 and EN 16254;b)for assessing the suitability and quality of adhesives for load-bearing timber structures;c)for determining if the adhesive after bonding has a damaging influence on the strength of the wood due to chemical action.This test is intended primarily to obtain performance data for the classification of adhesives for load-bearing timber structures according to their suitability for use in defined climatic environments. This test is carried out on Norway spruce (Picea abies L.) or Beech (Fagus sylvatica L.).This method is not intended for use to provide numerical design data and does not necessarily represent the performance of the bonded member in service.
| Committee |
CEN/TC 193
|
| DevelopmentNote |
Supersedes PREN 302-3. (09/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| DS EN 302-3 : 2017 | Identical |
| ONORM EN 302-3 : 2017 | Identical |
| UNE-EN 302-3:2018 | Identical |
| DIN EN 302-3:2017-11 | Identical |
| NBN EN 302-3 : 2013 | Identical |
| NS EN 302-3 : 2017 | Identical |
| PN EN 302-3 : 2017 | Identical |
| NEN EN 302-3 : 2017 | Identical |
| NF EN 302-3 : 2017 | Identical |
| BS EN 302-3:2017 | Identical |
| UNE-EN 302-3:2013 | Identical |
| DIN EN 302-3:2015-09 (Draft) | Identical |
| I.S. EN 302-3:2017 | Identical |
| SN EN 302-3 : 2018 | Identical |
| UNI EN 302-3 : 2013 | Identical |
| UNI EN 302-3:2017 | Identical |
| PREN 15497 : DRAFT 2011 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| DIN EN 15425:2015-06 (Draft) | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 11/30237554 DC : 0 | BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS |
| 15/30296765 DC : 0 | BS EN 15425 - ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 11/30253102 DC : 0 | BS EN 16351 - TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS |
| 03/314568 DC : 0 | EN 14815-1 - ADHESIVES, PHENOLIC AND AMINOPLASTIC FOR FINGER-JOINTS IN LAMELLAE, FOR LOAD-BEARING TIMBER STRUCTURES - PART 1: CLASSIFICATION AND PERFORMANCE |
| UNE-EN 15425:2017 | Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements |
| I.S. EN 301:2017 | ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| UNE-EN 301:2014 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| DIN EN 15497:2014-07 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| BS EN 16351:2015 | Timber structures. Cross laminated timber. Requirements |
| BS EN 15425:2017 | Adhesives. One component polyurethane (PUR) for load-bearing timber structures. Classification and performance requirements |
| UNI EN 15497 : 2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| I.S. EN 15416-1:2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
| BS EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements |
| EN 16351:2015 | Timber structures - Cross laminated timber - Requirements |
| DIN EN 15416-1:2017-05 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
| BS EN 16254 : 2013 | ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| BS EN 15416-1:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) |
| BS EN 15497:2014 | Structural finger jointed solid timber. Performance requirements and minimum production requirements |
| 15/30326222 DC : 0 | BS EN 301 - ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 11/30236369 DC : 0 | BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER |
| I.S. EN 16254:2013 | ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| UNE-EN 15416-1:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) |
| I.S. EN 15425:2017 | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| I.S. EN 14080:2013 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| DIN EN 16351:2015-12 | Timber structures - Cross laminated timber - Requirements |
| 11/30249114 DC : 0 | BS EN 15497 - STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| DIN EN 15416-1 E : 2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
| 15/30296771 DC : 0 | BS EN 15416-1 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASSHOUSE TEST) |
| 11/30240279 DC : DRAFT MAR 2011 | BS EN 16254 - ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 09/30193698 DC : DRAFT JAN 2009 | BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED LAMINATED SOLID TIMBER - REQUIREMENTS |
| PREN 301 : DRAFT 2015 | ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| DIN EN 15416-1:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
| PREN 15425 : DRAFT 2015 | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| UNE-EN 16351:2016 | Timber structures - Cross laminated timber - Requirements |
| BS EN 14080:2013 | Timber structures. Glued laminated timber and glued solid timber. Requirements |
| EN 15416-1:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) |
| EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
| EN 16254:2013+A1:2016 | Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements |
| EN 15497:2014 | Structural finger jointed solid timber - Performance requirements and minimum production requirements |
| EN 15425:2017 | Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements |
| I.S. EN 15497:2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| I.S. EN 16351:2015 | TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS |
| UNE-EN 15497:2014 | Structural finger jointed solid timber - Performance requirements and minimum production requirements |
| DIN EN 15497 E : 2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| ISO 20152-1:2010 | Timber structures — Bond performance of adhesives — Part 1: Basic requirements |
| DIN EN 15425:2008-06 | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| UNE-EN 16254:2014 | Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements |
| EN 1245:2011 | Adhesives - Determination of pH |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| ISO 5893:2002 | Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.